There is no jumper on the K3, so how does it know there is a filter
there?
Select RX ANT. If you check either the schematics or block diagram,
you will see that selecting RX ANT will route the RF line from the
TR switch *out* the RX OUT jack at the same time the RX IN jack is
selected.
73,
... Joe, W4TV
On 12/5/2013 6:46 PM, Ken Widelitz wrote:
The manual indicates you can patch in a narrowband filter between the RX
In/Out.
When I did this with other radios, I had to remove the jumper between the RX
In/Out and insert the narrowband filter. There is no jumper on the K3, so
how does it know there is a filter there?
The application is for a filter for the bottom of the 10 meter CW band so I
can use the other radio high in the CW band or for SSB.
73, Ken, K6LA / VY2TT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
