Config -> LIN OUT -> tap REV/2 button. Use VFO A knob to adjust t= xxx to set
transmit monitor level. 0 = none and up from there. Mine are set at 010.
YMMV.
Ken K6MR
From: HP<mailto:pfizenma...@q.com>
Sent: Wednesday, April 28, 2021 23:36
To: elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] Record both RX signal and TX monitor in CW
Using AUDACITY and the K3S USB Audio Codec -recording received signals works
fine-but is there a way to also record the TX monitor signal ?
Obviously I can run another computer running Audacity and simply record the
speaker or headphone output
bit is there any way to avoid that ?
Hank K7HP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@outlook.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com