Re: [Elecraft] Remote Power On/Off
Partly correct. Pressing the power button to turn off initiates a shutdown procedure. Pin 8 is only grounded momentarily when you power on and does not stay grounded while powered up. Powering down by simply removing power is not recommended. Jim Rhodes K0XU On Jul 9, 2017 08:42, "Carl Ferguson"wrote: > I frequently operate remote. I am new to the K3. > > I interpret the manual to say to > > To turn the radio back on after my control program sends a PS0; command to > power off > >- turn on the DC power supply (this DC supply operates equipment in >addition to the K3 and must be turned off when the station is shutdown) >- ground ACC Pin 8 > > To turn the radio off > >- send the PS0; command >- open ACC Pin 8 >- turn off the DC power supply > > I infer from this sequence that pressing the Power button to turn on the K3 > effectively grounds ACC pin 8. > > Conversely, pressing the Power button to turn off the K3, opens ACC Pin 8. > > Is this correct? > > Thank you. > > Carl > W4UOA > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jimk...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Remote Power On/Off
I frequently operate remote. I am new to the K3. I interpret the manual to say to To turn the radio back on after my control program sends a PS0; command to power off - turn on the DC power supply (this DC supply operates equipment in addition to the K3 and must be turned off when the station is shutdown) - ground ACC Pin 8 To turn the radio off - send the PS0; command - open ACC Pin 8 - turn off the DC power supply I infer from this sequence that pressing the Power button to turn on the K3 effectively grounds ACC pin 8. Conversely, pressing the Power button to turn off the K3, opens ACC Pin 8. Is this correct? Thank you. Carl W4UOA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Remote power on/off progress for K3
Actually it's pin 8, not 5. I use the DTR line on a COM port, with a transistor level converter (identical to the simple FSK RTTY interface[1]), to trigger it, with custom software. For testing purposes, Hercules[2] is quite handy. [1] http://www.aa5au.com/rttyinterface.html [2] http://www.hw-group.com/products/hercules/index_en.html 73, ~iain / N6ML On Tue, Dec 25, 2012 at 12:52 AM, Jim Rhodes jimk...@gmail.com wrote: You need to provide a way to ground pin 5 on the aux connector. I do this with a remoterig interface. Any remote relay will work. This turns on the rig then the rig stays on even if the closure is momentary. To turn it off you need to send it the power down command via the command serial port. A macro within HRD will do this easily. The DC out jack on the K3 can then power a relay to turn on accessories. On Mon, Dec 24, 2012 at 4:52 PM, Chad Wasinger chadwasin...@outlook.comwrote: Hi Group, Been searching the mailing list for a solution to turn on/off my K3 remotely via Ham Radio Deluxe or another means. Looks like there has been some posts on using serial activity as a trigger to turn on the radio. Just wondering if there has been any progress in this area or if someone has a simple solution? I'm not sure how Kenwood does it on their ts-2000 but the remote on/off feature is pretty smooth via HRD. Suggestions? Thanks, Chad N0YK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Jim K0XU j...@rhodesend.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Remote power on/off progress for K3
Thanks for the feedback. I want something simple, so hopefully the FSK will work for me. Merry Christmas! Chad N0YK -Original Message- From: iain macdonnell - N6ML Sent: Tuesday, December 25, 2012 4:00 AM To: Jim Rhodes Cc: Chad Wasinger ; elecraft@mailman.qth.net Subject: Re: [Elecraft] Remote power on/off progress for K3 Actually it's pin 8, not 5. I use the DTR line on a COM port, with a transistor level converter (identical to the simple FSK RTTY interface[1]), to trigger it, with custom software. For testing purposes, Hercules[2] is quite handy. [1] http://www.aa5au.com/rttyinterface.html [2] http://www.hw-group.com/products/hercules/index_en.html 73, ~iain / N6ML On Tue, Dec 25, 2012 at 12:52 AM, Jim Rhodes jimk...@gmail.com wrote: You need to provide a way to ground pin 5 on the aux connector. I do this with a remoterig interface. Any remote relay will work. This turns on the rig then the rig stays on even if the closure is momentary. To turn it off you need to send it the power down command via the command serial port. A macro within HRD will do this easily. The DC out jack on the K3 can then power a relay to turn on accessories. On Mon, Dec 24, 2012 at 4:52 PM, Chad Wasinger chadwasin...@outlook.comwrote: Hi Group, Been searching the mailing list for a solution to turn on/off my K3 remotely via Ham Radio Deluxe or another means. Looks like there has been some posts on using serial activity as a trigger to turn on the radio. Just wondering if there has been any progress in this area or if someone has a simple solution? I'm not sure how Kenwood does it on their ts-2000 but the remote on/off feature is pretty smooth via HRD. Suggestions? Thanks, Chad N0YK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Jim K0XU j...@rhodesend.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Remote power on/off progress for K3
Hi Group, Been searching the mailing list for a solution to turn on/off my K3 remotely via Ham Radio Deluxe or another means. Looks like there has been some posts on using serial activity as a trigger to turn on the radio. Just wondering if there has been any progress in this area or if someone has a simple solution? I'm not sure how Kenwood does it on their ts-2000 but the remote on/off feature is pretty smooth via HRD. Suggestions? Thanks, Chad N0YK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Remote power on/off progress for K3
You need to provide a way to ground pin 5 on the aux connector. I do this with a remoterig interface. Any remote relay will work. This turns on the rig then the rig stays on even if the closure is momentary. To turn it off you need to send it the power down command via the command serial port. A macro within HRD will do this easily. The DC out jack on the K3 can then power a relay to turn on accessories. On Mon, Dec 24, 2012 at 4:52 PM, Chad Wasinger chadwasin...@outlook.comwrote: Hi Group, Been searching the mailing list for a solution to turn on/off my K3 remotely via Ham Radio Deluxe or another means. Looks like there has been some posts on using serial activity as a trigger to turn on the radio. Just wondering if there has been any progress in this area or if someone has a simple solution? I'm not sure how Kenwood does it on their ts-2000 but the remote on/off feature is pretty smooth via HRD. Suggestions? Thanks, Chad N0YK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Jim K0XU j...@rhodesend.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Remote Power on/off
The current subject of having the ability to turn the display on/off while operating remote could be solved another way. I would prefer to be able to turn the rig on/off with a software command. Not sure if this is a possible modification or not. Is the power switch a soft switch or is it a hard switch? Rich - N5ZC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Remote Power on/off
You can turn the K3 off with a software command. To turn it on, you need to manipulate the level of one of the AUX I/O pins (the 15-pin connector on the back of the rig). That could be done by an external device of some sort. Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 28, 2008 7:29 AM To: elecraft@mailman.qth.net; Darwin, Keith Subject: [Elecraft] Remote Power on/off The current subject of having the ability to turn the display on/off while operating remote could be solved another way. I would prefer to be able to turn the rig on/off with a software command. Not sure if this is a possible modification or not. Is the power switch a soft switch or is it a hard switch? Rich - N5ZC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com