Re: [Elecraft] Running the K3S with a Heath SB-220

[Nr4c]

 I have a friend who is prepping an SB220 for use with his K3.   He has built 
but not installed as yet a ""Softstart" and a "Softkey" circuit.  He also 
replace a sluggish fan and some caps.  The "Softkey" is needed as I think the 
SB220 uses high negative voltage on the key line and the K3(S) won't tolerate a 
negative keying voltage.

Connections would be  a PTT cable and RF from radio to amp.  Set the drive 
power with the K3 power control, and  you won't need ALC.

Enjoy your amp and good luck!

Sent from my iPad
...bc nr4c

> On Apr 3, 2017, at 1:36 AM, Robert B. Weinstock  wrote:
> 
> Good morning. Does anyone have any experience using a K3S to drive a Heath
> SB-220 linear amplifier? This is a 40-odd year-old amplifier with two Eimac
> 3-500Z tubes. My questions are: (1) What connections need to be made
> between the K3S and the SB-220; how much drive is likely needed; and what
> would be needed to run full break-in on CW? The SB-220 does not have its
> own break-in circuitry, but there are numerous vacuum relay-based
> modifications out there.
> 
> (And yes, I do have a KPA500 that I expect to use most of the time. I just
> want to be able to switch over to the SB-220, which provides far more power
> output.)
> 
> Thanks.
> 
> 73, Bob, W3RQ
> Takoma Park, Maryland
> K3, P3, KPA500, KAT500
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Running the K3S with a Heath SB-220

[Robert B. Weinstock]

Good morning. Does anyone have any experience using a K3S to drive a Heath
SB-220 linear amplifier? This is a 40-odd year-old amplifier with two Eimac
3-500Z tubes. My questions are: (1) What connections need to be made
between the K3S and the SB-220; how much drive is likely needed; and what
would be needed to run full break-in on CW? The SB-220 does not have its
own break-in circuitry, but there are numerous vacuum relay-based
modifications out there.

(And yes, I do have a KPA500 that I expect to use most of the time. I just
want to be able to switch over to the SB-220, which provides far more power
output.)

Thanks.

73, Bob, W3RQ
Takoma Park, Maryland
K3, P3, KPA500, KAT500
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com