Hi All,
Yesterday I finished assembling my KX1 SN 1069 and
everything works or so it seemed.
In testing the receiver it heard a signal on 40 meters
at .1 uV well and on 20 meters it was a bit less
sensitive at .2 uV. As receivers go, not bad.
In testing the transmitter it too worked but here is
my problem. With a 12 volt external power supply I am
only able to get 2.5 watts out on 40 and almost 2 on
20 meters. No, the power does not sag.
I am a hardware engineer so I am not new to circuitry
and this kind of device. I did the usual rechecking
of my work, verified parts values (visually), solder
connections, toroids ETC. I inspected the PCB under a
microscope for good connections.
Before I jump in and tear it apart I am hoping one of
you have had this problem and direct me to the source
of trouble.
Other than low power the rig works OK and I might say
very well.
All help appreciated.
K4SV
Dave...
__
Do you Yahoo!?
Yahoo! Personals - Better first dates. More second dates.
http://personals.yahoo.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com