Re: [Elecraft] SignaLink and KX3
For FT8 on my KX-3 I didn't use a Signalink for years. When I was having trouble with Winlink, a ham friend suggested I use a Signalink. Didn't I need it? david, KC1DNY On 8/20/2022 10:12 AM, Neil Zampella wrote: You really don't need a Signalink to do digital modes and the KX3. All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: I called Tigertronics the other day and asked them about a SignaLink USB and the bias voltage on the mic for the KX3. A lady called me back later in the day and told me that she has something to read to me that she didn’t understand. She said the tech department said that if you are using their jumper plug, that it has a blocking capacitor in it, so the bias voltage is ok. If you wire your own jumpers, you will have to disable mic bias. She said she didn’t understand what it meant, but the tech department said that I should know what it means. And I do. I’ll be checking the SignaLink jumper plug I have this week and let you know if this is the case. Jst a little info….. Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dhai...@bates.edu __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SignaLink and KX3
Even that is overkill. I use a $15 Sabrent soundcard from Amazon with my KX3. Neil, KN3ILZ On 8/20/2022 9:45 AM, 7MYM BD wrote: Yes, the kx3 only needs a suitable USB sound card to use, such as If you need an external box, you can consider riglink or digilink nano. 发送自我的盖乐世 原始信息 发件人: Neil Zampella 日期: 2022/8/20 22:13 (GMT+08:00) 收件人: k2vjk , elecraft@mailman.qth.net 主题: Re: [Elecraft] SignaLink and KX3 You really don't need a Signalink to do digital modes and the KX3. All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: > I called Tigertronics the other day and asked them about a SignaLink USB and the bias voltage on the mic for the KX3. A lady called me back later in the day and told me that she has something to read to me that she didn’t understand. She said the tech department said that if you are using their jumper plug, that it has a blocking capacitor in it, so the bias voltage is ok. If you wire your own jumpers, you will have to disable mic bias. She said she didn’t understand what it meant, but the tech department said that I should know what it means. And I do. I’ll be checking the SignaLink jumper plug I have this week and let you know if this is the case. Jst a little info….. > > Sent from Mail for Windows > > > __ Elecraft mailing list Home: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=JPnj14WMhPcWTuPF6RxvjBOIW4sRZ7dvX4nFfHfjZas%3Dreserved=0 <https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=JPnj14WMhPcWTuPF6RxvjBOIW4sRZ7dvX4nFfHfjZas%3Dreserved=0> Help: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htmdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=OAleW7I776e3j2GMb%2B1gTpY8%2F0dxq22hXwPBq4k6t8A%3Dreserved=0 <https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htmdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=OAleW7I776e3j2GMb%2B1gTpY8%2F0dxq22hXwPBq4k6t8A%3Dreserved=0> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net> This list hosted by: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=8Yxxkk0oovzKD5l%2BSqmceAb0h1%2BN%2Fbjmsr4k6x1f0Qs%3Dreserved=0 <https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=8Yxxkk0oovzKD5l%2BSqmceAb0h1%2BN%2Fbjmsr4k6x1f0Qs%3Dreserved=0> Please help support this email list: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.htmldata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=GVOoMCf0fH7KgdTrgvpGp7QhEy5HeQUrm8p5Fcc8gaw%3Dreserved=0 <https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.htmldata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=GVOoMCf0fH7KgdTrgvpGp7QhEy5HeQUrm8p5Fcc8gaw%3Dreserved=0> Message delivered to bd7...@hotmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto
Re: [Elecraft] SignaLink and KX3
Yes, the kx3 only needs a suitable USB sound card to use, such as If you need an external box, you can consider riglink or digilink nano. 发送自我的盖乐世 原始信息 发件人: Neil Zampella 日期: 2022/8/20 22:13 (GMT+08:00) 收件人: k2vjk , elecraft@mailman.qth.net 主题: Re: [Elecraft] SignaLink and KX3 You really don't need a Signalink to do digital modes and the KX3. All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: > I called Tigertronics the other day and asked them about a SignaLink USB and > the bias voltage on the mic for the KX3. A lady called me back later in the > day and told me that she has something to read to me that she didn’t > understand. She said the tech department said that if you are using their > jumper plug, that it has a blocking capacitor in it, so the bias voltage is > ok. If you wire your own jumpers, you will have to disable mic bias. She said > she didn’t understand what it meant, but the tech department said that I > should know what it means. And I do. I’ll be checking the SignaLink jumper > plug I have this week and let you know if this is the case. Jst a little > info….. > > Sent from Mail for Windows > > > __ Elecraft mailing list Home: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=JPnj14WMhPcWTuPF6RxvjBOIW4sRZ7dvX4nFfHfjZas%3Dreserved=0 Help: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htmdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=OAleW7I776e3j2GMb%2B1gTpY8%2F0dxq22hXwPBq4k6t8A%3Dreserved=0 Post: mailto:Elecraft@mailman.qth.net This list hosted by: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=8Yxxkk0oovzKD5l%2BSqmceAb0h1%2BN%2Fbjmsr4k6x1f0Qs%3Dreserved=0 Please help support this email list: https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.htmldata=05%7C01%7C%7Ce8ca3f6d4b174d5aeec608da82b62d93%7C84df9e7fe9f640afb435%7C1%7C0%7C637966016210470337%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7Csdata=GVOoMCf0fH7KgdTrgvpGp7QhEy5HeQUrm8p5Fcc8gaw%3Dreserved=0 Message delivered to bd7...@hotmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] SignaLink and KX3
You really don't need a Signalink to do digital modes and the KX3. All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: I called Tigertronics the other day and asked them about a SignaLink USB and the bias voltage on the mic for the KX3. A lady called me back later in the day and told me that she has something to read to me that she didn’t understand. She said the tech department said that if you are using their jumper plug, that it has a blocking capacitor in it, so the bias voltage is ok. If you wire your own jumpers, you will have to disable mic bias. She said she didn’t understand what it meant, but the tech department said that I should know what it means. And I do. I’ll be checking the SignaLink jumper plug I have this week and let you know if this is the case. Jst a little info….. Sent from Mail for Windows __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] SignaLink and KX3
I called Tigertronics the other day and asked them about a SignaLink USB and the bias voltage on the mic for the KX3. A lady called me back later in the day and told me that she has something to read to me that she didn’t understand. She said the tech department said that if you are using their jumper plug, that it has a blocking capacitor in it, so the bias voltage is ok. If you wire your own jumpers, you will have to disable mic bias. She said she didn’t understand what it meant, but the tech department said that I should know what it means. And I do. I’ll be checking the SignaLink jumper plug I have this week and let you know if this is the case. Jst a little info….. Sent from Mail for Windows -- This email has been checked for viruses by AVG antivirus software. www.avg.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com