[Elecraft] TX audio via N1MM+
Is there a template for configuring N1MM+ to use with a K3s so that I can record TX audio on the fly using the Function keys? Asking for a friend as I don't (yet) own a K3s, but I know his has direct USB connection to the PC so I'm not sure where to start in configuring N1MM+ and the K3s. Thanks and 73, -- Tad Danley, K3TD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TX Audio
Keith, May be obvious, but make sure MENU::MIC SEL is set To Line In, and as Lyle is saying nothing shall be plugged into the rear Line In port. On the PC, select Speakers (USB Audio Codec) 73 Marco HB9CAT -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Keith Robinson Sent: mercoledì, 5. agosto 2015 23:21 To: elecraft@mailman.qth.net Subject: [Elecraft] TX Audio To all the new K3S owners, I need a little help with an issue I am having with my K3S so I thought I would ask for some input. The issue is with audio being sent from the PC to radio thru the USB cable. Simply put, I have non. Receive audio going back to the PC from the radio is fine. The S meter on HRD sees signals just fine. I can decode CW , PSK , and RTTY fine also. I just can’t transmit any audio. By the way CW sends great, no problem with that. Doesn’t matter what the source is. Could be a digital program or a logging program or a contesting program. I tried DVK files (wav.files) even recorded music but nothing. It appears that Windows is doing it’s job here. You can see the audio being played on the little meters in the playback devices window. But nothing at the radio. I have tried this on 3 different computers with the same results. With different OS. Win.7, Win.8.1. USB drivers seem to load fine when I connect the radio. I checked all the menu settings. Just don’t know where to go from here. Am I missing something? Any suggestions would be appreciated Keith Robinson W4KTR --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hb9...@thezollingers.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TX Audio
To all the new K3S owners, I need a little help with an issue I am having with my K3S so I thought I would ask for some input. The issue is with audio being sent from the PC to radio thru the USB cable. Simply put, I have non. Receive audio going back to the PC from the radio is fine. The S meter on HRD sees signals just fine. I can decode CW , PSK , and RTTY fine also. I just can’t transmit any audio. By the way CW sends great, no problem with that. Doesn’t matter what the source is. Could be a digital program or a logging program or a contesting program. I tried DVK files (wav.files) even recorded music but nothing. It appears that Windows is doing it’s job here. You can see the audio being played on the little meters in the playback devices window. But nothing at the radio. I have tried this on 3 different computers with the same results. With different OS. Win.7, Win.8.1. USB drivers seem to load fine when I connect the radio. I checked all the menu settings. Just don’t know where to go from here. Am I missing something? Any suggestions would be appreciated Keith Robinson W4KTR --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TX Audio
Be sure the 3.5mm LINE IN jack has nothing plugged in. if a cable is plugged into this jack, the KIO3B will only accept LINE audio from the jack, not from the USB. LINE OUT will always be active on both the analog 3.5mm jack as well as USB. 73, Lyle KK7P On 8/5/15 2:21 PM, Keith Robinson wrote: To all the new K3S owners, I need a little help with an issue I am having with my K3S so I thought I would ask for some input. The issue is with audio being sent from the PC to radio thru the USB cable. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] tx audio
Sri, I accidently sent the last unfinished letter.
I presume the third -order intermodulation {IMD} should suggest the answer.
Here i see that the Ft5000 is better than the K3, but only when the FT5000
is using class A modulation. One should expect lower IMD running Class A ,
right? Thank you, 73 Steve W6HPK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft TX audio adjustment
Larry, IMO, it's difficult to properly set up the TX audio ... especially the equalizer ... by listening to yourself. I have a long-time friend who has a Flex that's helped me set up the TX's audio by guiding me while watching my signal's audio on the Flex display. 73! Ken - K0PP elecraftcov...@rfwave.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft TX audio adjustment
I use my Perseus SDR to record the whole band while transmitting with my K3 into a 50 Ohm load. For those not familiar with the Perseus, it can record up to 1600 KHz of frequency to hard disk for later playback as if you were listening to a live transmission. I save the file with an appropriate file name and then play it back in comparison with other recordings using different settings and/or microphones. The Perseus is of course not limited by a crystal filter, so the recording can be any bandwidth and I can also listen on the other sideband. 73 Dave, G4AON K3/100 #80 == IMO, it's difficult to properly set up the TX audio ... especially the equalizer ... by listening to yourself. I have a long-time friend who has a Flex that's helped me set up the TX's audio by guiding me while watching my signal's audio on the Flex display. 73! Ken - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] TX audio settings
For the ones who might be interested,I have created 6 MP3 audio files testing in my K3 the following mics: Kenwood MC-43S Elecraft MH-2 Audio Tecnica ATR-30 On these clips you will be able to hear the difference between them with ragchewing or dx/contesing audio,also I included a word document with all my settings to create those audio clips. With pleasure I am willing to share with you,just send me a direct email off the group and I will reply with a zip.73 AD4C For a refined ham it is compulsory to own a k3 --- On Sun, 11/8/09, Larry - K2GN k...@comcast.net wrote: From: Larry - K2GN k...@comcast.net Subject: Re: [Elecraft] Elecraft Pro Set K2 To: elecraft@mailman.qth.net Date: Sunday, November 8, 2009, 12:55 AM Thanks to those that replied to my question. One more question: Does the Mic sound like a Heil HC4 or HC5? I'll be using it for Dxing and contesting. Not rag chewing. Thanks again. de K2GN/Larry K3 - S/N 3278 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] TX audio passband and ESSB
I saw a note from Lyle that indicated that the TX audio passband was 250hz to 3150hz. Would this be any different with the 6khz roofing filter( ESSB enabled) or is it a firmware issue at this time? Jay - KT5E ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] TX audio passband and ESSB
When ESSB is enabled in FW it should be different, but not till then. 73 Greg AB7R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jay Schwisow Sent: Wednesday, January 30, 2008 5:59 PM To: Elecraft Discussion List Subject: [Elecraft] TX audio passband and ESSB I saw a note from Lyle that indicated that the TX audio passband was 250hz to 3150hz. Would this be any different with the 6khz roofing filter( ESSB enabled) or is it a firmware issue at this time? Jay - KT5E ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
