Re: [Elecraft] Unwanted audio
Martin, Just a thought - do you have anything plugged into the LINE IN jack? Or do you have MIC plus LINE set on? Another thought - do you have the FP mic set to turn on the additional mic preamp? 73, Don W3FPR On 3/3/2020 3:31 PM, Martin wrote: Elecrafters, my K3 shows a strange Problem. On USB it transmits a tone at about 2khz above (respectively on LSB about 2khz below) carrierpoint. This happens even with no mic attached. The level of the tone follows the setting of the 2.4khz level of TXEQ. It also follows Mic Gain level. Anyone know what to do? Setup: Dynamic Mic on Frontpanel (or removed, doesn't matter), tap XMIT, listen on sdr-console. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Unwanted audio
Nice try, but no, 2 TONE is OFF . I should've said that. As a workaround I reduced Mic Gain a little, switched on TX Gate and set it to a level the tone wouldn't trigger TX Gate. Now it is not audible anymore when i don't speak, but comes on again as i trigger TX Gate with my voice. It is not very loud, but the otherwise beautiful audio is 'unaesthetic'. Thank you. Am 04.03.20 um 02:43 schrieb Bob McGraw K4TAX: Check the CONFIG menu for the 2 TONE. Make sure it is OFF. 73 Bob, K4TAX On 3/3/2020 2:31 PM, Martin wrote: Elecrafters, my K3 shows a strange Problem. On USB it transmits a tone at about 2khz above (respectively on LSB about 2khz below) carrierpoint. This happens even with no mic attached. The level of the tone follows the setting of the 2.4khz level of TXEQ. It also follows Mic Gain level. Anyone know what to do? Setup: Dynamic Mic on Frontpanel (or removed, doesn't matter), tap XMIT, listen on sdr-console. -- Ohne CW ist es nur CB.. 73, Martin DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Unwanted audio
Elecrafters, my K3 shows a strange Problem. On USB it transmits a tone at about 2khz above (respectively on LSB about 2khz below) carrierpoint. This happens even with no mic attached. The level of the tone follows the setting of the 2.4khz level of TXEQ. It also follows Mic Gain level. Anyone know what to do? Setup: Dynamic Mic on Frontpanel (or removed, doesn't matter), tap XMIT, listen on sdr-console. -- Ohne CW ist es nur CB.. 73, Martin DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
