Re: [Elecraft] receive problem

2005-01-14 Thread David
the problem is not in the k2 it checked out okay
the kat 100 seems to be acting really strange with the leds lighting some
sometimes as it tunes and sometimes it does not and it was cycling through
and never really tuning so I think the problem is in the kat100 which is in
the same box as the kpa 100 so I will start the diagnosis of that on
Saturday.

- Original Message - 
From: "Gary Surrency" <[EMAIL PROTECTED]>
To: "'W3FPR - Don Wilhelm'" <[EMAIL PROTECTED]>; "'David'"
<[EMAIL PROTECTED]>; 
Sent: Friday, January 14, 2005 1:17 PM
Subject: RE: [Elecraft] receive problem


Also check all of your cables for faults.

--
73, Gary AB7MY
=
[EMAIL PROTECTED]
Elecraft Technical Support




-Original Message-
From: W3FPR - Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Friday, January 14, 2005 6:56 AM
To: David; elecraft@mailman.qth.net
Cc: [EMAIL PROTECTED]
Subject: Re: [Elecraft] receive problem


David,

You have 3 pieces of Elecraft gear connected together - check to see which
one of them creates the problem.
First, just move the antenna to the base K2 to see if you can hear there -
if so, next move it direct to the KPA100 antenna connector - if you can
still hear the signals, the problem is with the KAT100.  Once you determine
which Elecraft box contains the problem, we can help more.

OTOH, if you have the K160RX option installed, be certain Rant is set off on

80 meters.  The receive antenna setting is remembered on a per band basis.
As a quick check, just connect an antenna to the receiveng antenna jack.

73,
Don W3FPR

- Original Message - 

>I set my k2 up two days ago after a long time idle and hooked up an 80
>dipole  I was tuning around on 80 meters and it sounded dead but when I
>switched  the
> antenna to my Kenwood ts450 the band came to life. so it appears that my
> k2
> with remote kpa100 and tuner seems to be deaf the last thing I had done to
> the unit was the shield mod on the kpa 100 did not have a chance to check
> it
> out after words so any ideas as to where to begin?
> see ya
>




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.302 / Virus Database: 265.6.12 - Release Date: 1/14/2005




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.302 / Virus Database: 265.6.12 - Release Date: 1/14/2005

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] receive problem

2005-01-14 Thread W3FPR - Don Wilhelm

David,

You have 3 pieces of Elecraft gear connected together - check to see which 
one of them creates the problem.
First, just move the antenna to the base K2 to see if you can hear there - 
if so, next move it direct to the KPA100 antenna connector - if you can 
still hear the signals, the problem is with the KAT100.  Once you determine 
which Elecraft box contains the problem, we can help more.


OTOH, if you have the K160RX option installed, be certain Rant is set off on 
80 meters.  The receive antenna setting is remembered on a per band basis. 
As a quick check, just connect an antenna to the receiveng antenna jack.


73,
Don W3FPR

- Original Message - 


I set my k2 up two days ago after a long time idle and hooked up an 80
dipole
I was tuning around on 80 meters and it sounded dead but when I switched 
the
antenna to my Kenwood ts450 the band came to life. so it appears that my 
k2

with remote kpa100 and tuner seems to be deaf the last thing I had done to
the unit was the shield mod on the kpa 100 did not have a chance to check 
it

out after words so any ideas as to where to begin?
see ya




___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


[Elecraft] receive problem

2005-01-14 Thread David
I set my k2 up two days ago after a long time idle and hooked up an 80
dipole
I was tuning around on 80 meters and it sounded dead but when I switched the
antenna to my Kenwood ts450 the band came to life. so it appears that my k2
with remote kpa100 and tuner seems to be deaf the last thing I had done to
the unit was the shield mod on the kpa 100 did not have a chance to check it
out after words so any ideas as to where to begin?
see ya

73's
N1IB
David Schornak

K2 03027

arf
don't forget me
Mis Ginger

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com