RE: [Elecraft] External Keying Auto-Detect problem

2004-08-30 Thread Rich Lentz 
Ken:

It is kind of tricky to get it right.  The actions you describe indicate
that you have the underline under the InP. The underline can not be under
the InP to get this extra feature.  

Follow these steps:

Tap Menu

Then Select (that is, rotate the VFO as needed) - InP  PdLn - (or it may
read PdLr or HAnd), 

Depress (HOLD) MENU so that PdLn (or it may read PdLr or HAnd) is underlined
(or if you use reverse paddle that PdLr is underlined. Don't leave it in
Hand as this is pure Straight Key. If it reads HAnd rotate the VFO to PdLn
or PdLr.)  The underline can not be under the InP

Now tap DISPLAY.  You should briefly see  AdEt  and either OFF or On.

Tap DISPLAY again if you need to so that the last display you saw is AdEt
On. (It toggles each time you tap DISPLAY.) 

Then exit the menu (tap Menu key).

I have found that sometimes I need to shut off auto-detect as I squeeze
the two paddles together at exactly the same time and thus get a long dah
rather than di dah di dah di dah.

Rich,
KE0X
 

-Original Message-
From: KEN N4SO [mailto:[EMAIL PROTECTED] 
Sent: Sunday, August 29, 2004 9:47 PM
To: [EMAIL PROTECTED]
Subject: Re: [Elecraft] External Keying Auto-Detect problem


Rich,
Mine says  Pdln  DISPLAY  
response  is  SEC
Port OFF

One problem I have noticed is no keying on insertion of the 
Bencher paddle key line cable.   I have to play around with it
before I get any keying.  Is this related?

Ken  N4SO  Mobile, AL
K2   #3394


The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web
up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up
today!

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

RE: [Elecraft] External Keying Auto-Detect problem

2004-08-29 Thread Rich Lentz 


 The K2 is suposed to detect simultaneous closures on the dit and dah
lines, and interpret that as a hand key input.  Not doing it so far. When I
turn on the K2, the firmware versions displayed are 2.03d and 1.07.

Bob:

Select -  Menu, InP - then - PdLn,  Now tap DISPLAY.  You should briefly
see  AdEt  and either OFF or On.

Select On. Then exit the menu (tap any other key.

Rich,
KE0X
 

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] External Keying Auto-Detect problem

2004-08-29 Thread Bob Tellefsen 
Well, the mystery is solved.
I had not realized there was an on/off menu choice for the
auto-detect function.  Two hams told me about it, and yes,
it did the trick.  Now in business, and I can get back to
trying to learn N1MM Logger.
73, Bob N6WG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): 
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com