Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
Use BSET and check antenna selection on 40m. Bet it's on wrong antenna. Sent from my iPhone ...nr4c. bill > On Oct 3, 2016, at 10:04 AM, John E Bastinwrote: > > For the last few weeks I’ve had a problem in the Sub RX of the K3, and I > wonder if anyone has an idea what setting I may have messed up, or where to > look for the problem. > > The problem is that I cannot hear any signals in the Sub RX on 40 meters. > I’ve tried headphones, internal speaker, external speakers, all the same > problem. If I turn up the Sub RX gain a LOT, I hear a little noise, but I > think it’s just receiver noise. The problem is only on 40 meters, in all > modes. All other bands are working just fine. > > The signals are there, because I can see them in the display of the P3. In > fact, I’ve been working around the problem in split DX pileups, determining > where the callers are by watching the traces on the display and positioning > the transmitter accordingly. > > K3 serial number 7299, FW version 5.50, DSP 1 and 2 v2.87. I’ve done the > KSYN3A upgrade on both receivers, but everything has been working until this > problem appeared, as I say, a few weeks ago. I really can’t remember anything > I may have done that coincides with the appearance of this problem. > > Does anyone have any ideas? Thanks in advance for your help. > > 73, > > John K8AJS > jbas...@sssnet.com > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
On Oct 3, 2016, at 11:14, Don Wilhelmwrote: > John, > > Normally the P3 does not show signals from the subRX. The IF out is only > from the main RX. > Unless you have added an IF buffer amplifier and IF output to your SubRX, you > will not see signals from the subRX on your P3. Ah, I understand. That puts a different slant on the subject. Thank you! 73, John K8AJS jbas...@sssnet.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
John, Normally the P3 does not show signals from the subRX. The IF out is only from the main RX. Unless you have added an IF buffer amplifier and IF output to your SubRX, you will not see signals from the subRX on your P3. 73, Don W3FPR On 10/3/2016 10:55 AM, John E Bastin wrote: On Oct 3, 2016, at 10:19, Don Wilhelmwrote: John, The most common cause of that problem is the SubRX antenna selection - that is a per band setting. Go to 40 meters and get into BSET - then tap the RX ANT button. If that does not restore proper operation, contact Elecraft support. I’ll check that, but it seems that if there was no antenna, there would be no signals in the sub rx on 40 meters, and I’m seeing the signals on the P3, I just have no audio. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
On Oct 3, 2016, at 10:55, John E Bastinwrote: > > On Oct 3, 2016, at 10:19, Don Wilhelm wrote: >> >> John, >> >> The most common cause of that problem is the SubRX antenna selection - that >> is a per band setting. >> >> Go to 40 meters and get into BSET - then tap the RX ANT button. >> >> If that does not restore proper operation, contact Elecraft support. > > I’ll check that, but it seems that if there was no antenna, there would be no > signals in the sub rx on 40 meters, and I’m seeing the signals on the P3, I > just have no audio. > > I’ll take a look and let you know. I did try that, and it made no difference, looked like everything was set OK. I’ll contact Elecraft. Thanks for the help, 73, John K8AJS jbas...@sssnet.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
On Oct 3, 2016, at 10:19, Don Wilhelmwrote: > > John, > > The most common cause of that problem is the SubRX antenna selection - that > is a per band setting. > > Go to 40 meters and get into BSET - then tap the RX ANT button. > > If that does not restore proper operation, contact Elecraft support. I’ll check that, but it seems that if there was no antenna, there would be no signals in the sub rx on 40 meters, and I’m seeing the signals on the P3, I just have no audio. I’ll take a look and let you know. 73, John K8AJS jbas...@sssnet.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - Can't hear 40m sigs in sub rx
John, The most common cause of that problem is the SubRX antenna selection - that is a per band setting. Go to 40 meters and get into BSET - then tap the RX ANT button. If that does not restore proper operation, contact Elecraft support. 73, Don W3FPR On 10/3/2016 10:04 AM, John E Bastin wrote: For the last few weeks I’ve had a problem in the Sub RX of the K3, and I wonder if anyone has an idea what setting I may have messed up, or where to look for the problem. The problem is that I cannot hear any signals in the Sub RX on 40 meters. I’ve tried headphones, internal speaker, external speakers, all the same problem. If I turn up the Sub RX gain a LOT, I hear a little noise, but I think it’s just receiver noise. The problem is only on 40 meters, in all modes. All other bands are working just fine. The signals are there, because I can see them in the display of the P3. In fact, I’ve been working around the problem in split DX pileups, determining where the callers are by watching the traces on the display and positioning the transmitter accordingly. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com