Re: [Elecraft] Mcu ld
Paul, Refer to either the manual or K3 Utility "Force a Firmware Download" and follow the instructions given there. That condition is usually the result of a communications glitch during a firmware download. Always wait until the firmware load completes before touching the K3 or the computer. 73, Don W3FPR On 5/24/2020 6:10 AM, PAUL GM0BKC wrote: Hi all I have just tried to do the firmware update on my k3s, but come accross a problem and now it's stuck in MCU Ld And cannot get away from this now I have tried to follow the troobleshooting advice but still no joy. Has anyone come accross the same problem and if so how do I sort it. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Mcu ld
Paul: There is a recovery procedure in KX3 Utility Help, Troubleshooting, MCU Load Failure. Also connect the KXUSB directly from the PC to the KX3 without an intervening PX3 or KXPA100 if you get into this situation. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of PAUL GM0BKC Sent: Sunday, May 24, 2020 03:11 To: elecraft@mailman.qth.net Subject: [Elecraft] Mcu ld Hi all I have just tried to do the firmware update on my k3s, but come accross a problem and now it's stuck in MCU Ld And cannot get away from this now I have tried to follow the troobleshooting advice but still no joy. Has anyone come accross the same problem and if so how do I sort it. Regards Paul g0bkc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Mcu ld
I had this happen on my KX3 once. Followed the recovery procedure in the manual and it worked like a charm. Follow closely. Sent from my iPhone ...nr4c. bill > On May 24, 2020, at 6:13 AM, PAUL GM0BKC wrote: > > Hi all > I have just tried to do the firmware update on my k3s, but come accross a > problem and now it's stuck in MCU Ld > And cannot get away from this now I have tried to follow the > troobleshooting advice but still no joy. > Has anyone come accross the same problem and if so how do I sort it. > Regards > Paul g0bkc > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] MCU LD
Jack, Just holding the power button for 10 seconds is not sufficient. Go to the K3 Utility Help file, and click on Troubleshooting. From there, select Forcing the K3 into Firmware Load Required Mode Then follow ALL the instructions shown. 73, Don W3FPR On 7/1/2011 10:55 AM, W4GRJ wrote: I think I have a real mess up here. I did the latest firmware update and all seemed o.k. until I tried to transmit. I have no audio at all. Thinking it could be the mike, I put the original K3 mike on with same results. O.K., all I did was a firmware update so I decided to back rev to previous versionmy lovely K3 choked and shut down during the first part of the upload. Now all I get is a blinking red power led and MCU LD in the display. I tried the reset procedure, holding the power button for 10 sec without success. The utility does not recognize the radio is connected. Appreciate suggestions to fix short of sending the radio back. Tnx, Jack W4GRJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD
Jack - The first step in the K3Utility help is to disconnect the K3 from the power supply for at least 30 seconds, maybe longer. In the K3 Utility, bring up the help file, and type force into the search box, then click on the List topics button for a step by step. HTH! 73, Mike NF4L On 7/1/2011 10:55 AM, W4GRJ wrote: I think I have a real mess up here. I did the latest firmware update and all seemed o.k. until I tried to transmit. I have no audio at all. Thinking it could be the mike, I put the original K3 mike on with same results. O.K., all I did was a firmware update so I decided to back rev to previous versionmy lovely K3 choked and shut down during the first part of the upload. Now all I get is a blinking red power led and MCU LD in the display. I tried the reset procedure, holding the power button for 10 sec without success. The utility does not recognize the radio is connected. Appreciate suggestions to fix short of sending the radio back. Tnx, Jack W4GRJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD
Georgens, Tom wrote: At this point, the K3 seems to have corrupted firmware, but it can no longer talk to a PC in order to do a new download. Not sure what to try next. Don't panic! Disconnect the K3's APP power connector for a few minutes. Then connect your true serial cable (not USB) and try again. It will probably start loading again automatically when you open the K3 Utility. The K3 does a nice job of protecting itself from update problems. 73 GL! Bill -- View this message in context: http://n2.nabble.com/MCU-LD-tp3594245p3594324.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD
Contact k3supp...@elecraft.com. Gary has some voltage checks on the KIO3 to run. Also try once turning everything off (K3 power supply, computer) and retry the load. Dick, K6KR Sent from my iPhone On Sep 6, 2009, at 2:20 PM, Georgens, Tom tom.georg...@netapp.com wrote: Hello - I am building a K3 kit and all was going well with the checkout and test when I decided to download the latest version of the firmware. The download failed and now the K3 displays MCU LD whenever it is turned on. The K3 utility programs no longer can talk the to the K3. My original PC was using a USB to serial cable and worked fine through all the calibration steps. I used another USB to serial adapter that was compatible with the K3 USB to serial software but it did not work either. I tried yet another PC that has a native serial port, but no luck with that as well. In verbose mode, the utility program says it is sending ; at various baud rates and I presume it is getting no response. I suppose it is possible that the serial port failed after working for about 10 minutes, but it seems unlikely. All the boards seem to be seated well and I doubt it is a connection problem At this point, the K3 seems to have corrupted firmware, but it can no longer talk to a PC in order to do a new download. Not sure what to try next. Any suggestions welcome 73, Tom W2SC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD
Also try forcing an MCU load (from page 45 of the owner's manual): Forcing a Firmware Download If you accidentally load an old or incompatible firmware version and find the K3 unresponsive, do the following: (1) unplug the K3 from the power supply and wait 5 seconds; (2) plug the power supply back in; (3) hold the K3's POWER switch in; after about 10 seconds, you'll see the TX LED flash (you'll also see MCU LD on the LCD); (4) load the correct firmware version. Ron AC7AC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD
Hi Tom: After having built my K3 (s/n 2432) back in Jan, I agreed to build one for a good friend last month and ran into somewhat the same problems. The build went well, the unit received on the three bands from the XG2 at 1 microvolt and the K3 Utility would do the 5 and 50 watt TX Gain calibration as well as the filter set up in both the main Rx and the KRX3 sub receiver. The new K3 unit (s/n 3288) came with MCU Ver 3.14 and DSP Ver 2.16 installed and I decided to do an firmware upgrade to 3.19 / 2.17. The K3 Utility (Ver 1.2.8.10) is installed on a Dell D830 notebook and I'm using a native serial port directly to the K3 - this configuration has been used to do about 12 updates to my own K3 since I built it in Jan/09 all with no problems. When the K3 Utility was used to check the Firmware in the new K3, it confirmed the MCU, FPF and DSP1, but not DSP2. It acted as if the Aux DSP board for the KRX3 wasn't there. I tried to upload a full new Firmware vers set and it would load correctly the new MCU and FPF but would not load the new version of either DSP1 or DSP2. At the end of the load attempt the new MCU and FPF would remain but it would revert back to the original DSP1 Ver 2.16. I contacted K3Support and had prompt replies from both Dale and Gary and we tried various things. After checking and rechecking the connectors between the RF board and the Front Panel board, as well as the connectors between the DSP boards and the Front Panel board they asked me to measure the voltage at U1 pin 8 on the KIO3 board. It needs to be at least - 5 V DC. Mine was ok so then they sent me replacement Main and Aux DSP boards to try. Unfortunately the results were the same with the new Main DSP board. At this point Dale asked that I return the K3 to Aptos, which I did. It's there now and scheduled to be checked out Tues or Wed of this week. Good luck in getting yours fixed. I'll update you once I find out anything further with this one. 73, Doug VE3MV - Original Message - From: Georgens, Tom tom.georg...@netapp.com To: elecraft@mailman.qth.net Sent: Sunday, September 06, 2009 5:20 PM Subject: [Elecraft] MCU LD Hello - I am building a K3 kit and all was going well with the checkout and test when I decided to download the latest version of the firmware. The download failed and now the K3 displays MCU LD whenever it is turned on. The K3 utility programs no longer can talk the to the K3. My original PC was using a USB to serial cable and worked fine through all the calibration steps. I used another USB to serial adapter that was compatible with the K3 USB to serial software but it did not work either. I tried yet another PC that has a native serial port, but no luck with that as well. In verbose mode, the utility program says it is sending ; at various baud rates and I presume it is getting no response. I suppose it is possible that the serial port failed after working for about 10 minutes, but it seems unlikely. All the boards seem to be seated well and I doubt it is a connection problem At this point, the K3 seems to have corrupted firmware, but it can no longer talk to a PC in order to do a new download. Not sure what to try next. Any suggestions welcome 73, Tom W2SC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD message
Thanks for all the replies. All is well in K3 land here! After loading the unit software and usb driver on my laptop and running the util from there, the K3 reloaded the firmware. All I had to do then was get the com port back to speed for the software I use. Forgot the K3 had an rs232 speed setting in it. daaah!! Now it's working. Thanks again to all who responded. de K2GN/Larry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD message
I get this all the time when I test the K3 Utility's ability to load a K3 in this state. Be very sure of the cable connection and COM port selection. Use the Windows Device Manager to verify the COM port if necessary. The K3 Utility should find the radio when you test communications from the ports tab. The expected speed is 38,400 and it should give you the warning dialog that says that the K3 Utility is waiting for MCU firmware. If you can't get that far, you can't load firmware. It could be cable, PC, COM port number, or the K3 KIO3. If you can't get past this, contact k3supp...@elecraft.com Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Larry - K2GN Sent: Tuesday, August 11, 2009 6:25 PM To: elecraft@mailman.qth.net Subject: [Elecraft] MCU LD message I've got my K3 S/N 3278 hung up. Sparing the details of the story, I was testing the K3 Util software when it happened. I probably tried to load the firmware and shouldn't have. I've followed all the reset instructions in the help files and manual. Including removing power etc etc. Nothing is working. Anybody else ever get this and how do I get out of it? Thanks de K2GN/Larry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD message
I ALWAYS use the button to test communications before I do anything. CUL Dick! You going to be up on the island this weekend? Greg On Aug 11, 2009, at 7:25 PM, Dick Dievendorff wrote: I get this all the time when I test the K3 Utility's ability to load a K3 in this state. Be very sure of the cable connection and COM port selection. Use the Windows Device Manager to verify the COM port if necessary. The K3 Utility should find the radio when you test communications from the ports tab. The expected speed is 38,400 and it should give you the warning dialog that says that the K3 Utility is waiting for MCU firmware. If you can't get that far, you can't load firmware. It could be cable, PC, COM port number, or the K3 KIO3. If you can't get past this, contact k3supp...@elecraft.com Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Larry - K2GN Sent: Tuesday, August 11, 2009 6:25 PM To: elecraft@mailman.qth.net Subject: [Elecraft] MCU LD message I've got my K3 S/N 3278 hung up. Sparing the details of the story, I was testing the K3 Util software when it happened. I probably tried to load the firmware and shouldn't have. I've followed all the reset instructions in the help files and manual. Including removing power etc etc. Nothing is working. Anybody else ever get this and how do I get out of it? Thanks de K2GN/Larry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
Dick, the utility just hangs. Not Responsive and does not let me do anything -- change tabs, etc. It needs a time out to recover in such cases. I can make it crash and send you the resulting error from Windows if that will be of help. Do I just delete that entry? Pete, W1RM -Original Message- From: Dick Dievendorff [mailto:die...@comcast.net] Sent: Friday, July 10, 2009 1:47 PM To: 'Peter Chamalian' Cc: 'Elecraft' Subject: RE: [Elecraft] MCU LD and K3 Utility If you can, would you describe blew up better for me (a private e-mail would be fine). I'd like to determine what happened and fix it, if I can. The K3 Utility retains its information, as Vic described, in the Windows Registry. Start Regedit from the Windows start menu run box, and then navigate to HKEY_CURRENT_USER\Software\Microsoft\Elecraft\K3 Utility. You may delete the entire key and all the named values, as the K3 Utility creates this key with default values on each startup if it's not already there. The COM port name is part of that information. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Chamalian Sent: Friday, July 10, 2009 8:21 AM To: Elecraft Subject: [Elecraft] MCU LD and K3 Utility Things are really balled up. I tried to upload the latest firmware but as I was checking to see which serial port was connected to the computer, the K3 Utility blew up and in spite of my best efforts to uninstall and reinstall, when I launch it, it tried to connect to the K3 on a port that doesn't exist and just hangs and crashes. I've rebooted, looked for a .ini file that might be referenced for that bogus port, but I can't find it. This is on a windows machine running XP with all the latest updates. Of course, the K3 is hung up in MCU LD mode and since I can't talk to it, just sits there. I've powered down for an hour or more and tried but to no avail. I am hoping to be active in IARU so this is the last thing I need right now. HELP Please! Pete, W1RM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
Peter Chamalian wrote: Things are really balled up. I tried to upload the latest firmware but as I was checking to see which serial port was connected to the computer, the K3 Utility blew up and in spite of my best efforts to uninstall and reinstall, when I launch it, it tried to connect to the K3 on a port that doesn't exist and just hangs and crashes. I've rebooted, looked for a .ini file that might be referenced for that bogus port, but I can't find it. Hi Pete, I was waiting to see if K6KR or someone more knowledgeable than I was around, but I guess not, so here goes. Run REGEDIT. Look for HKEY_CURRENT_USER\Software\Elecraft\K3 Utility That's where the port (and other) information is kept. I hope this helps. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
If you can, would you describe blew up better for me (a private e-mail would be fine). I'd like to determine what happened and fix it, if I can. The K3 Utility retains its information, as Vic described, in the Windows Registry. Start Regedit from the Windows start menu run box, and then navigate to HKEY_CURRENT_USER\Software\Microsoft\Elecraft\K3 Utility. You may delete the entire key and all the named values, as the K3 Utility creates this key with default values on each startup if it's not already there. The COM port name is part of that information. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Chamalian Sent: Friday, July 10, 2009 8:21 AM To: Elecraft Subject: [Elecraft] MCU LD and K3 Utility Things are really balled up. I tried to upload the latest firmware but as I was checking to see which serial port was connected to the computer, the K3 Utility blew up and in spite of my best efforts to uninstall and reinstall, when I launch it, it tried to connect to the K3 on a port that doesn't exist and just hangs and crashes. I've rebooted, looked for a .ini file that might be referenced for that bogus port, but I can't find it. This is on a windows machine running XP with all the latest updates. Of course, the K3 is hung up in MCU LD mode and since I can't talk to it, just sits there. I've powered down for an hour or more and tried but to no avail. I am hoping to be active in IARU so this is the last thing I need right now. HELP Please! Pete, W1RM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
The registry key is HKEY_CURRENT_USER\Software\Elecraft\K3 Utility. Too much Microsoft going on here today! 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Dievendorff Sent: Friday, July 10, 2009 10:47 AM To: 'Peter Chamalian' Cc: 'Elecraft' Subject: Re: [Elecraft] MCU LD and K3 Utility If you can, would you describe blew up better for me (a private e-mail would be fine). I'd like to determine what happened and fix it, if I can. The K3 Utility retains its information, as Vic described, in the Windows Registry. Start Regedit from the Windows start menu run box, and then navigate to HKEY_CURRENT_USER\Software\Microsoft\Elecraft\K3 Utility. You may delete the entire key and all the named values, as the K3 Utility creates this key with default values on each startup if it's not already there. The COM port name is part of that information. Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter Chamalian Sent: Friday, July 10, 2009 8:21 AM To: Elecraft Subject: [Elecraft] MCU LD and K3 Utility Things are really balled up. I tried to upload the latest firmware but as I was checking to see which serial port was connected to the computer, the K3 Utility blew up and in spite of my best efforts to uninstall and reinstall, when I launch it, it tried to connect to the K3 on a port that doesn't exist and just hangs and crashes. I've rebooted, looked for a .ini file that might be referenced for that bogus port, but I can't find it. This is on a windows machine running XP with all the latest updates. Of course, the K3 is hung up in MCU LD mode and since I can't talk to it, just sits there. I've powered down for an hour or more and tried but to no avail. I am hoping to be active in IARU so this is the last thing I need right now. HELP Please! Pete, W1RM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
Running the utility trying to access an invalid port should not cause any problems at all, except that you won't be able to communicate with the K3. And invalid or missing port should not cause it to hang in any way. The first step is to load the Utility with *nothing* connected between the PC and K3. It should run normally except that it can't talk to the K3, so you won't get any report on current firmware, etc. You'll see ??? on the Utility screen in those places. You didn't describe your best efforts to uninstall and reinstall or what computer/OS you're using, but if you're running Windows that should include removing the program using the install/uninstall utility in the Control Panel, then rebooting the computer *before* trying to install the new Utility. Then, of course you download the utility program again from Elecraft rather than trying to install a potentially-corrupted version already on your HD. I may not have the latest K3 Utility, but the version I have and all the earlier ones offered a way to choose the port from the screens. Click on the PORT tab. If a list of ports isn't shown in the drop-down window, click REFRESH PORT LIST. Normally, if you're not sure which port works, you'd first be sure you have the K3 connected to the PC and turned on, then click on TEST COMMUNICATIONS. If that fails then you'd try a different port. In your case, the K3 is hung so it may not respond to a TEST COMMUNICATIONS query. In that case you need to force an MCU load as described on page of the Owner's Manual (Rev D). Since you don't know which port is correct, you may need to do that trying different ports until it works. Ron AC7AC -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Vic K2VCO Sent: Friday, July 10, 2009 9:15 AM To: Peter Chamalian Cc: Elecraft Subject: Re: [Elecraft] MCU LD and K3 Utility Peter Chamalian wrote: Things are really balled up. I tried to upload the latest firmware but as I was checking to see which serial port was connected to the computer, the K3 Utility blew up and in spite of my best efforts to uninstall and reinstall, when I launch it, it tried to connect to the K3 on a port that doesn't exist and just hangs and crashes. I've rebooted, looked for a .ini file that might be referenced for that bogus port, but I can't find it. Hi Pete, I was waiting to see if K6KR or someone more knowledgeable than I was around, but I guess not, so here goes. Run REGEDIT. Look for HKEY_CURRENT_USER\Software\Elecraft\K3 Utility That's where the port (and other) information is kept. I hope this helps. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] MCU LD and K3 Utility
Oops. Dick's and my e-mails crossed in cyberspace. He's the programmer and Utility expert. Like Vic I was responding only because no one else seemed to have been around (yet). My suggestions stand (and I apologize, I see now you did say you had Xp) but Dick is in the best position to lead through to the solution. 73 Ron AC7AC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
RE: [Elecraft] MCU LD
Don't attempt to load firmware into your K3 through a microHAM device. Use a USB to Serial Adapter or RS-232 cable that sends exactly what is sent by the K3 Utility. Some users have sometimes succeeded by changing the microHAM Router to a radio type none before loading K3 firmware, but sometimes (depending on the microHAM router version) that doesn't work either. Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sent: Tuesday, September 23, 2008 1:12 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] MCU LD OK, I tried to load new firmware to the K3, not using the USB-serial cable, but thru the micro keyer interface which is normally connected to the K3. At first my PC 'sees' the K3 but during upload something went wrong and now I have a K3 displaying MCU LD and a blinking TX LED. Anyone has a lead here? vy 73 Eric PA3CEV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] MCU LD
From the microKEYER Manual: If your radio includes upgradeable firmware, DO NOT perform any upgrade through microKEYER. That said, with any microHAM interface you must set the radio type to None (Ports | CAT | Set), check the Disable router queries box, check both Forward autoinformation to CAT port boxes, and set the 2nd CAT port to None before attempting an firmware update. After all of that you still need to keep a real serial port or a generic USB to RS-232 adapter for emergencies. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sent: Tuesday, September 23, 2008 4:12 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] MCU LD OK, I tried to load new firmware to the K3, not using the USB-serial cable, but thru the micro keyer interface which is normally connected to the K3. At first my PC 'sees' the K3 but during upload something went wrong and now I have a K3 displaying MCU LD and a blinking TX LED. Anyone has a lead here? vy 73 Eric PA3CEV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] MCU LD
You need to set the radio selection in Router to none and I also turned off polling just in case. Do that and then upload the firmware again with the utility. - 73, Greg - AB7R Whidbey Island WA NA-065 On Tue Sep 23 13:12 , Eric sent: OK, I tried to load new firmware to the K3, not using the USB-serial cable, but thru the micro keyer interface which is normally connected to the K3. At first my PC 'sees' the K3 but during upload something went wrong and now I have a K3 displaying MCU LD and a blinking TX LED. Anyone has a lead here? vy 73 Eric PA3CEV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com