Re: Does San Diego Require NRTL Marking to Install ITE
You have been able to get Early Use Letters from UL, but I think that policy has recently changed a little. Contact your test engineer. Regards, Doug McKean --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
Measuring Instruments Directive
I have come across some information on the web specifically to do with electricity and gas meters that infers that a new directive called the Measuring Instruments Directive is about to come into force. I have searched the Europa website for information on this but can not find any. Does anyone have any info or ideas on this? Thanks Nick Martin --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
JWDS00028
Hi, Does anyone aware of what this standard JWDS0028 is meant for ? Where is it originate from ? Thanks in advance! Jasmine --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
Does San Diego Require NRTL Marking to Install ITE
All, Is NRTL marking a mandatory requirement to install a CMTS router in a cable head end in San Diego? We have a 48 VDC powered CMTS router which needs to be installed in a cable operators head end in early May. Although the basic UL evaluation of the product has been completed without incident, marking authorization is not expected until late in May after the line filter vendor has approvals for the line filters. I have heard that a letter from UL or some other NRTL indicating that the product is under evaluation and listing the NRTL project number may be sufficient to install the product. If San Diego is a municipality that requires NRTL marking to install an ITE product, can a project notice letter or other procedure be used to allow early installation of the ITE product? Any assistance or information will be appreciated. Regards, Matt Campanella Compliance Engineer Motorola, Inc. Broadband Communications Sector 3 Highwood Drive East Tewksbury, MA 01876 matthew.campane...@motorola.com --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
Output short circuit testing
Hi Group, In a previous life when I developed frequency converters, we used to perform short circuit tests to UL508C. I am developing automotive ESA's which may find use in non-automotive applications ( Mains - DC power source ). Is output short circuit testing covered by some generic standard, safety or otherwise that one can use as a guideline for test setups, parameters and performance criteria? Thanx in advance. - Chris Chileshe This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
