[PSES] SRD in China
Hi, I have a question regarding Chinese short range device requirements. Specification: metering equipment (heat, water) with SRD's 868MHz Band in Europe center frequency 868,95 (frequency band 868,7 - 869,2MHz) 10mW bandwith approx. 250kHz or 434MHz Band in Europe center frequency 434,475MHz 10mW bandwith approx. 250kHz Low Duty Cycle Is such equipment allowed to operate in China? If not which frequency bands are allowed? Any support is appreciated. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Das neue Buch zum Thema Product Compliance: http://www.beuth.de/de/artikel/produktkonformitaet http://www.beuth.de/de/artikel/produktkonformitaet (Produktkonformität, Prozesse, Risikomanagement, CE-Kennzeichnung, Fallbeispiele für Geschäftsführung, Konstruktion, Normenabteilung, Vertrieb, Einkauf, Produktion, QM) _ Globalnorm GmbH Alt-Moabit 94 10559 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mail mailto:michael.loer...@globalnorm.de michael.loer...@globalnorm.de http://www.globalnorm.de/ www.globalnorm.de http://www.globalnorm.ca/ www.globalnorm.ca http://www.product-compliance.com/ www.product-compliance.com _ Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
[PSES] 答复: SRD in China
Hi Michael, As I know the 800MHz SRD device in China is from 868MHz to 868.6MHz and should be 5mW. So you may need to change it. Paul Wang (王卫波) GM Compliance,Inc.Beijing Office Tel:86-10-58203318 Tel:86-10-67877845 Fax: 86-10-58203316 Cell:86-13810026747 Website: www.gmcompliance.com.cn http://www.gmcompliance.com.cn/ (China) www.gmcompliance.com http://www.gmcompliance.com/ (U.S.A.) 发件人: emc-p...@ieee.org [mailto:emc-p...@ieee.org] 代表 Michael Loerzer 发送时间: 2012年4月20日 14:00 收件人: emc-p...@ieee.org 主题: SRD in China Hi, I have a question regarding Chinese short range device requirements. Specification: metering equipment (heat, water) with SRD's 868MHz Band in Europe center frequency 868,95 (frequency band 868,7 - 869,2MHz) 10mW bandwith approx. 250kHz or 434MHz Band in Europe center frequency 434,475MHz 10mW bandwith approx. 250kHz Low Duty Cycle Is such equipment allowed to operate in China? If not which frequency bands are allowed? Any support is appreciated. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Das neue Buch zum Thema Product Compliance: http://www.beuth.de/de/artikel/produktkonformitaet (Produktkonformität, Prozesse, Risikomanagement, CE-Kennzeichnung, Fallbeispiele für Geschäftsführung, Konstruktion, Normenabteilung, Vertrieb, Einkauf, Produktion, QM) _ Globalnorm GmbH Alt-Moabit 94 10559 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mailmichael.loer...@globalnorm.de http://www.globalnorm.de/ www.globalnorm.de http://www.globalnorm.ca/ www.globalnorm.ca http://www.product-compliance.com/ www.product-compliance.com _ Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher j.bac...@ieee.org David Heald dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
[PSES] SRD China
Hi, I have a question reagrding Chinese short range device requirements. Specification: metering equipemt (heat, water) with SRD's 868MHz Band in Europe center frequency 868,95 (frequency band 868,7 - 869,2MHz) 10mW bandwith approx. 250kHz or 434MHz Band in Europe center ferquency 434,475MHz 10mW bandwith approx. 250kHz Low Duty Cycle Is such equipment allowed to operate in China? If not which frequency bands are allowed? Any support is appreciated. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Das neue Buch zum Thema Product Compliance: http://www.beuth.de/de/artikel/produktkonformitaet http://www.beuth.de/de/artikel/produktkonformitaet (Produktkonformität, Prozesse, Risikomanagement, CE-Kennzeichnung, Fallbeispiele für Geschäftsführung, Konstruktion, Normenabteilung, Vertrieb, Einkauf, Produktion, QM) _ Globalnorm GmbH Alt-Moabit 94 10559 Berlin Fon +49 30 3229027-51 Mobile +49 170 3229027 Fax +49 30 3229027-59 Mail mailto:michael.loer...@globalnorm.de michael.loer...@globalnorm.de http://www.globalnorm.de/ www.globalnorm.de http://www.globalnorm.ca/ www.globalnorm.ca http://www.product-compliance.com/ www.product-compliance.com _ Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
[PSES] Low voltage DC electrical wire and cables require CCC approval?
I am writing to ask for help in identifying if a cable carrying 48VDC at 2A maximum current will require a CCC certified cable. The cable is used to interconnect a AC line to DC power supply to a 48VDC speaker. The cable does not run inside a wall or other building construction. The cable similar to a AC wall wart output supplying 48 VDC. I understand CCC controls these 5 categories of Electrical wires and cables. 0101: Cord sets 0102: Flexible rubber-sheathed cables for mining purposes 0103: Insulated cables (wires) for railway vehicles of rated voltage up to and including 3kV 0104: Rubber insulated cables of rated voltages up to and including 450/750V 0105: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V I am failing to understand where the lower limit is for these types. Do all current carrying conductors with a insulation surrounding in China require CCC approval? Can you direct me to the document , GB standard or law that specifies the lower limits of the above electrical wires and cables or is this found in a clause of my GB 8988;2001 (IEC60065;1998) standard? Thank you in advance, Chuck McDowell NOTICE: This email may contain confidential information. Please see http://www.meyersound.com/confidential/ for our complete policy. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
[PSES] safety standard for PV-related stuff
IEC site says that TC22 has voted yes on IEC62477-1 Nov 2011, but still waiting. EN62103 has scope that I need, but not published in LVD. And the usual suspects of 61730, 61646, 61215, 50521, and 50548 not correct for my stuff. EU equivalilant of UL1741/UL1012 for stuff in combiner box that is connected to a PV string? thanks, Brian - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] safety standard for PV-related stuff
Combiner boxes are in the scope of 62109-4, but this is a potential new work item on TC82's docket. For now, the guts would be subjected to whatever the guts normally would if the guts were components used elsewhere. Regards, Peter L. Tarver From: Brian Oconnell Sent: Friday, April 20, 2012 14:30 IEC site says that TC22 has voted yes on IEC62477-1 Nov 2011, but still waiting. EN62103 has scope that I need, but not published in LVD. And the usual suspects of 61730, 61646, 61215, 50521, and 50548 not correct for my stuff. EU equivalilant of UL1741/UL1012 for stuff in combiner box that is connected to a PV string? thanks, Brian This email message is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. If you are not an intended recipient, you may not review, use, copy, disclose or distribute this message. If you received this message in error, please contact the sender by reply email and destroy all copies of the original message. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] safety standard for PV-related stuff
Thanks Peter. I looked at this standard, but ignored because no EN and noted that the WG had it marked 'on hold'. Recent status known? I want single grand unified product safety and EMC standards for everything. Both less than 20 pages. Using very large font. And mostly pictures. Brian -Original Message- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Peter Tarver Sent: Friday, April 20, 2012 3:59 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: [PSES] safety standard for PV-related stuff Combiner boxes are in the scope of 62109-4, but this is a potential new work item on TC82's docket. For now, the guts would be subjected to whatever the guts normally would if the guts were components used elsewhere. Regards, Peter L. Tarver From: Brian Oconnell Sent: Friday, April 20, 2012 14:30 IEC site says that TC22 has voted yes on IEC62477-1 Nov 2011, but still waiting. EN62103 has scope that I need, but not published in LVD. And the usual suspects of 61730, 61646, 61215, 50521, and 50548 not correct for my stuff. EU equivalilant of UL1741/UL1012 for stuff in combiner box that is connected to a PV string? thanks, Brian - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com