Re: IEC 60950-1 released
I read in !emc-pstc that David Heald wrote (in <3bdd7a08.5c37a...@mediaone.net>) about 'IEC 60950-1 released', on Mon, 29 Oct 2001: >Is this equivalent to UL 60950? If so, the differences may be >substantial. Not precisely equivalent, AFAIK. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Eat mink and be dreary! --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
Re: IEC 60950-1 released
Is this equivalent to UL 60950? If so, the differences may be substantial. Dave Heald --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
RE: IEC 60950-1 released
Apart from numerous small changes and clarifications, resulting from experience/enquiries over the past couple of years there were the following major items: Requirements added covering the effect of UV on materials and people. Added detail regarding use of lasers and LEDs; Added requirements for equipment to be connected to a Cable Distribution Network (e.g. cable TV) or an antenna; Added requirements for equipment to be supplied by a d.c. mains supply (mainly, but not exclusively, large telecom equipment in a central office at 48-60 V); Deleted most of the flammability tests and refer instead to (mainly) IEC 60695. (Few technical changes involved). The above changed about half the pages in the standard, so it was decided to go for a new edition. Also, with "parts 2" coming along, it was timely to change 950 to part 1. The "Parts Two" will be for all sorts of odd ball things such as line fed equipment and large robotic data storage systems. We will continue to develop the "parts two" over the next year or so. John P. Wagner Regulatory Compliance & Mandatory Standards AVAYA Strategic Standards. 1300 W. 120th Ave, Room B3-D16 Phone/Fax: (303) 538-4241 johnwag...@avaya.com > -- > From: Andre, Pierre-Marie[SMTP:pierre-marie.an...@intel.com] > Reply To: Andre, Pierre-Marie > Sent: Monday, October 29, 2001 2:16 AM > To: Emc-Pstc (E-mail) > Subject: IEC 60950-1 released > > > Is it possible to get a summary of the changes with the previous > version ? > should we retest all our products which comply today with the previous > version ?... > I am just curious > > > > Pierre-Marie Andre > Intel Sophia Senior Approval Engineer > Tel : +33 (0) 4 93 00 14 13 Fax : +33 (0) 4 93 00 14 01 > > http://www.intel.com > > > > --- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson:pstc_ad...@garretson.org > Dave Healddavehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the > old messages are imported into the new server. >
Re: IEC 60950-1 released -- FDA -- Aircrafts
Hi friends, Thanks for all feedback! What should I've done without your help . Best regards Amund --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
Re: IEC 60950-1 released
I read in !emc-pstc that Andre, Pierre-Marie wrote (in ) about 'IEC 60950-1 released', on Mon, 29 Oct 2001: >Is it possible to get a summary of the changes with the previous version ? No, as far as I know, unless you know someone on TC74 or the national committee that parallels it. >should we retest all our products which comply today with the previous >version ?... No. The existing standard is valid for about 3 years, but maybe more because IEC60950-2 is likely to be also required and it has not been published yet. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Eat mink and be dreary! --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
IEC 60950-1 released
Is it possible to get a summary of the changes with the previous version ? should we retest all our products which comply today with the previous version ?... I am just curious Pierre-Marie Andre Intel Sophia Senior Approval Engineer Tel : +33 (0) 4 93 00 14 13 Fax : +33 (0) 4 93 00 14 01 > http://www.intel.com > --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
RE: IEC 60950-1 released
Looks like someone will have to bite the bullet and buy a copy... Ghery Pettit Intel -Original Message- From: Momcilovic, Nick [mailto:nikola.momcilo...@qtiworld.com] Sent: Friday, October 26, 2001 9:15 AM To: 'am...@westin-emission.no'; emc-p...@majordomo.ieee.org Subject: RE: IEC 60950-1 released This is all I could find on the IEC website: "This first edition of IEC 60950-1 (10-01) cancels and replaces the third edition of IEC 60950, issued in 1999, and constitutes a technical revision" Sincerely, Nick Momcilovic Product Safety Coordinator Engineering Technical Services QTI N64W23110 Main Street Sussex, WI 53089-5301 USA Phone: +1-414-566-7915 Fax: +1-414-566-9576 mailto:nick.momcilo...@qtiworld.com http://www.qtiworld.com -Original Message- From: am...@westin-emission.no [mailto:am...@westin-emission.no] Sent: Friday, October 26, 2001 8:25 AM To: emc-p...@majordomo.ieee.org Subject: IEC 60950-1 released Safety folks, The safety standard IEC 60950-1 (Information technology equipment - Safety - Part 1: General requirements) was released by IEC on October 25th 2001. Is this a new version of the existing IEC60950:1999 ? Best regards Amund Westin, Oslo/Norway -Opprinnelig melding- Fra: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]På vegne av Dan Kwok Sendt: 14. oktober 2001 20:35 Til: Andrea Bishop; emc-p...@majordomo.ieee.org Emne: Re: 2 GHz Amplifiers Does anyone have an idea on when the cessation date for EN 300-339 will be once EN 301-498 V1.3.1 becomes harmonized? - Original Message - From: "Andrea Bishop" To: Sent: Wednesday, October 10, 2001 12:22 AM Subject: FW: 2 GHz Amplifiers > > ETSI EN 301 489-1 V 1.3.1 was formally published by ETSI on 26 September > 2001 and is therefore no longer Final Draft. > > According the the ETSI work programme, it was delivered to the Commission on > 27 September and is due to be cited in the Official Journal on 31 October. > It will then be a harmonised standard. > > regards > > Andrea Bishop > TUV Product Service Ltd > Fareham, Hants --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.
RE: IEC 60950-1 released
This is all I could find on the IEC website: "This first edition of IEC 60950-1 (10-01) cancels and replaces the third edition of IEC 60950, issued in 1999, and constitutes a technical revision" Sincerely, Nick Momcilovic Product Safety Coordinator Engineering Technical Services QTI N64W23110 Main Street Sussex, WI 53089-5301 USA Phone: +1-414-566-7915 Fax: +1-414-566-9576 mailto:nick.momcilo...@qtiworld.com http://www.qtiworld.com -Original Message- From: am...@westin-emission.no [mailto:am...@westin-emission.no] Sent: Friday, October 26, 2001 8:25 AM To: emc-p...@majordomo.ieee.org Subject: IEC 60950-1 released Safety folks, The safety standard IEC 60950-1 (Information technology equipment - Safety - Part 1: General requirements) was released by IEC on October 25th 2001. Is this a new version of the existing IEC60950:1999 ? Best regards Amund Westin, Oslo/Norway -Opprinnelig melding- Fra: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]På vegne av Dan Kwok Sendt: 14. oktober 2001 20:35 Til: Andrea Bishop; emc-p...@majordomo.ieee.org Emne: Re: 2 GHz Amplifiers Does anyone have an idea on when the cessation date for EN 300-339 will be once EN 301-498 V1.3.1 becomes harmonized? - Original Message - From: "Andrea Bishop" To: Sent: Wednesday, October 10, 2001 12:22 AM Subject: FW: 2 GHz Amplifiers > > ETSI EN 301 489-1 V 1.3.1 was formally published by ETSI on 26 September > 2001 and is therefore no longer Final Draft. > > According the the ETSI work programme, it was delivered to the Commission on > 27 September and is due to be cited in the Official Journal on 31 October. > It will then be a harmonised standard. > > regards > > Andrea Bishop > TUV Product Service Ltd > Fareham, Hants --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
IEC 60950-1 released
Safety folks, The safety standard IEC 60950-1 (Information technology equipment - Safety - Part 1: General requirements) was released by IEC on October 25th 2001. Is this a new version of the existing IEC60950:1999 ? Best regards Amund Westin, Oslo/Norway -Opprinnelig melding- Fra: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]På vegne av Dan Kwok Sendt: 14. oktober 2001 20:35 Til: Andrea Bishop; emc-p...@majordomo.ieee.org Emne: Re: 2 GHz Amplifiers Does anyone have an idea on when the cessation date for EN 300-339 will be once EN 301-498 V1.3.1 becomes harmonized? - Original Message - From: "Andrea Bishop" To: Sent: Wednesday, October 10, 2001 12:22 AM Subject: FW: 2 GHz Amplifiers > > ETSI EN 301 489-1 V 1.3.1 was formally published by ETSI on 26 September > 2001 and is therefore no longer Final Draft. > > According the the ETSI work programme, it was delivered to the Commission on > 27 September and is due to be cited in the Official Journal on 31 October. > It will then be a harmonised standard. > > regards > > Andrea Bishop > TUV Product Service Ltd > Fareham, Hants --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
