RE: capacitor filter inserts for electrical connectors
Ghery, Ken, I think they were called micro-Q ... I am not sure if they are being produced any more. Last time I saw one was about 5 years ago or so. The pins were designated to correspond with Vcc and logic common. You may want to contact Circuit Components Inc. which was identified in the below article: http://www.devicelink.com/mpmn/archive/98/04/case.html Good luck. Kurt Fischer -Original Message- From: Pettit, Ghery [mailto:ghery.pet...@intel.com] Sent: Wednesday, December 04, 2002 4:34 PM To: 'Ken Javor'; emc-p...@majordomo.ieee.org Subject: RE: capacitor filter inserts for electrical connectors Ken, I found a similar product on page 179 of the 2002 ITEM made by Metatech. Is this what you're looking for? Ghery Pettit -Original Message- From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: Wednesday, December 04, 2002 4:08 PM To: emc-p...@majordomo.ieee.org Subject: capacitor filter inserts for electrical connectors Members: I am looking for manufacturers of capacitor filter inserts that are pushed into pre-existing connectors and provide capacitance from selected pins through a ground plane included in the insert to the connector shell. I think TRW developed these a number of years ago and called them microdiscs, or something similar, but I cannot find anything on the web, nor in the back of my ITEM. Any assistance would be appreciated. Ken Javor --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: capacitor filter inserts for electrical connectors
Ken Try Micro Electronic mfg LLC www.microem.com telephone 949-766-8596 for filter inserts. They come in different cap ratings and various connector designs. Dan Anchondo -Original Message- From: Pettit, Ghery [mailto:ghery.pet...@intel.com] Sent: Wednesday, December 04, 2002 4:34 PM To: 'Ken Javor'; emc-p...@majordomo.ieee.org Subject: RE: capacitor filter inserts for electrical connectors Ken, I found a similar product on page 179 of the 2002 ITEM made by Metatech. Is this what you're looking for? Ghery Pettit -Original Message- From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: Wednesday, December 04, 2002 4:08 PM To: emc-p...@majordomo.ieee.org Subject: capacitor filter inserts for electrical connectors Members: I am looking for manufacturers of capacitor filter inserts that are pushed into pre-existing connectors and provide capacitance from selected pins through a ground plane included in the insert to the connector shell. I think TRW developed these a number of years ago and called them microdiscs, or something similar, but I cannot find anything on the web, nor in the back of my ITEM. Any assistance would be appreciated. Ken Javor --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: capacitor filter inserts for electrical connectors
Try this http://www.metatechcorp.com/CPD_PAGE.html not to be confused with http://www.metatech.org/ regards, Cameron O'Phee. Electromagnetic Compatibility Safety. Aristocrat Technologies Australia. Telephone : +61 2 9697 4420 Facsimile : +61 2 9663 1412 Mobile : 0418 464 016 -Original Message- From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: 05 December, 2002 11:08 To: emc-p...@majordomo.ieee.org Subject: capacitor filter inserts for electrical connectors Members: I am looking for manufacturers of capacitor filter inserts that are pushed into pre-existing connectors and provide capacitance from selected pins through a ground plane included in the insert to the connector shell. I think TRW developed these a number of years ago and called them microdiscs, or something similar, but I cannot find anything on the web, nor in the back of my ITEM. Any assistance would be appreciated. Ken Javor -- IMPORTANT NOTICES This email (including any documents referred to in, or attached, to this email) may contain information that is personal, confidential or the subject of copyright or other proprietary rights in favour of Aristocrat, its affiliates or third parties. This email is intended only for the named addressee. Any privacy, confidence, copyright or other proprietary rights in favour of Aristocrat, its affiliates or third parties, is not lost because this email was sent to you by mistake. If you received this email by mistake you should: (i) not copy, disclose, distribute or otherwise use it, or its contents, without the consent of Aristocrat or the owner of the relevant rights; (ii) let us know of the mistake by reply email or by telephone (+61 2 9413 6300); and (iii) delete it from your system and destroy all copies. Any personal information contained in this email must be handled in accordance with applicable privacy laws. Electronic and internet communications can be interfered with or affected by viruses and other defects. As a result, such communications may not be successfully received or, if received, may cause interference with the integrity of receiving, processing or related systems (including hardware, software and data or information on, or using, that hardware or software). Aristocrat gives no assurances in relation to these matters. If you have any doubts about the veracity or integrity of any electronic communication we appear to have sent you, please call +61 2 9413 6300 for clarification. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: capacitor filter inserts for electrical connectors
Ken, I found a similar product on page 179 of the 2002 ITEM made by Metatech. Is this what you're looking for? Ghery Pettit -Original Message- From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: Wednesday, December 04, 2002 4:08 PM To: emc-p...@majordomo.ieee.org Subject: capacitor filter inserts for electrical connectors Members: I am looking for manufacturers of capacitor filter inserts that are pushed into pre-existing connectors and provide capacitance from selected pins through a ground plane included in the insert to the connector shell. I think TRW developed these a number of years ago and called them microdiscs, or something similar, but I cannot find anything on the web, nor in the back of my ITEM. Any assistance would be appreciated. Ken Javor --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
