Re: [Emc-users] problem compiling the trunk version of EMC2
now compiled... but when I launch scripts/emc I get the following error: [EMAIL PROTECTED]:~/emc2-trunk$ scripts/emc EMC2 - pre-2.2 CVS HEAD Error in startup script: can't find package msgcat while executing package require msgcat (file /home/manfredi/emc2-trunk/tcl/bin/../emc.tcl line 49) invoked from within source [file join [file dirname [info script]] .. emc.tcl] (file /home/manfredi/emc2-trunk/tcl/bin/pickconfig.tcl line 34) I've the same problem with the pre 2.1.6 version. I searched for the package msgcat in package manager but I don't find it...anyone knows what should I install? Thanks, Manfredi My websites: www.m24-pro.com www.emc2cnc.altervista.org _ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] problem compiling the trunk version of EMC2
On Thu, May 17, 2007 at 11:48:56AM +, Manfredi Leto wrote: now compiled... Error in startup script: can't find package msgcat ... I searched for the package msgcat in package manager but I don't find it...anyone knows what should I install? gettext I found it using apt-file. $ apt-file search msgcat ... gettext: usr/bin/msgcat - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] problem compiling the trunk version of EMC2
Might not be the same as the tcl msgcat package which tkemc looks for.. Most distros I've seen already have that installed.. Manfredi: can you tell us a bit about your OS / system? Regards, Alex - Original Message - From: Chris Radek [EMAIL PROTECTED] To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Sent: Thursday, May 17, 2007 3:12 PM Subject: Re: [Emc-users] problem compiling the trunk version of EMC2 On Thu, May 17, 2007 at 11:48:56AM +, Manfredi Leto wrote: now compiled... Error in startup script: can't find package msgcat ... I searched for the package msgcat in package manager but I don't find it...anyone knows what should I install? gettext I found it using apt-file. $ apt-file search msgcat ... gettext: usr/bin/msgcat - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] problem compiling the trunk version of EMC2
The OS is Ubuntu 6.06...the same I use at home. This is the computer I use at university, so I cannot check other things right now because I'm not there, I can try other things tomorrow and will let you know what happened. the PC is a P4 on a ASUS P5VD2-MX SE motherboard with 512 Mb RAM. Please note that I've installed packages gettext and tclx8.3 as suggested by paul_c and chris, but the result was the same. Also, I don't know if it is important, the official release of EMC2 2.1.5 works perfectly. And...alex said Might not be the same as the tcl msgcat package which tkemc looks for..., but I'm not using tkemc interface...because the config selector doesn't open. thanks, Manfredi My websites: www.m24-pro.com www.emc2cnc.altervista.org From: Alex Joni [EMAIL PROTECTED] Reply-To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Subject: Re: [Emc-users] problem compiling the trunk version of EMC2 Date: Thu, 17 May 2007 15:21:16 +0300 Might not be the same as the tcl msgcat package which tkemc looks for.. Most distros I've seen already have that installed.. Manfredi: can you tell us a bit about your OS / system? Regards, Alex - Original Message - From: Chris Radek [EMAIL PROTECTED] To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Sent: Thursday, May 17, 2007 3:12 PM Subject: Re: [Emc-users] problem compiling the trunk version of EMC2 On Thu, May 17, 2007 at 11:48:56AM +, Manfredi Leto wrote: now compiled... Error in startup script: can't find package msgcat ... I searched for the package msgcat in package manager but I don't find it...anyone knows what should I install? gettext I found it using apt-file. $ apt-file search msgcat ... gettext: usr/bin/msgcat - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] problem compiling the trunk version of EMC2
Manfredi Leto wrote: Please note that I've installed packages gettext and tclx8.3 as suggested by paul_c and chris, but the result was the same. The Tcl parts of EMC are not my area of expertise, so this could be totally wrong, but I think EMC uses tcl 8.4, not 8.3. Regards, John Kasunich - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] homing
Gentlemen, I am still working on my homing problem. I have a screen shot of the halscope. Where should I upload it to give you access? thanks Stuart - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] problem compiling the trunk version of EMC2
On Thu, May 17, 2007 at 01:41:13PM +, Manfredi Leto wrote: The OS is Ubuntu 6.06...the same I use at home. This is the computer I use at university, so I cannot check other things right now because I'm not there, I can try other things tomorrow and will let you know what happened. the PC is a P4 on a ASUS P5VD2-MX SE motherboard with 512 Mb RAM. Please note that I've installed packages gettext and tclx8.3 as suggested by paul_c and chris, but the result was the same. Also, I don't know if it is important, the official release of EMC2 2.1.5 works perfectly. In that case you should be able to use apt-get build-dep emc2, as it shows on the wiki page: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Preparing_Ubuntu_to_compile_emc2 - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] homing
Hi, try to use imagebin: http://imagebin.org/ regards, Manfredi My websites: www.m24-pro.com www.emc2cnc.altervista.org From: Stuart Stevenson [EMAIL PROTECTED] Reply-To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net To: Emc-users@lists.sourceforge.net Subject: [Emc-users] homing Date: Thu, 17 May 2007 08:52:59 -0500 Gentlemen, I am still working on my homing problem. I have a screen shot of the halscope. Where should I upload it to give you access? thanks Stuart - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] why does the spindle signal not get droped when EMC2 goes into e stop?
when I put EMC2 into estop from halui the spindle signal stays true and the coolant signals goes false. the trouble is I can not clear the signal to the spindle until I'm out of estop and the spindle stays running. why does the coolant get dropped and not the spindle signal with it? what is the criteria for EMC2 to put itself into estop is it only limit switches? can this be a problem or should I not be concerned? one more question I used (halui.program.run) for a run program hardware button and the halui run button will not work now. can it be tied to both, or does it create duplicate signals, and it's one or the other? Thanks Al - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Reset of offsets after running program
I just run a % sign at the start and end of my programs, nothing else Andy Jon Elson wrote: Andy Holcomb wrote: Okay, I am making a request/plea. Refresher, I loaded up EMC2 after running BDI for about 3 or 4 years and I use TkEMC (because I like it!!!). After running my first program EMC2 reset my offsets to what the machine started at. So I asked the group why is it that BDI didn't do this and how come I can't use the right click on the axis to set the offset. The jist of the answer I got was because thats not proper edict. One trick is to not have an M02 at the end of the program. This gets a warning message, but doesn't reset the offsets. I think you can reinstate the offsets with G92.3. Jon - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] homing
Gentlemen, I have uploaded a picture to imagebin. The name of the picture is stustev. This is a screen shot of the feedback from the homing cycle of my machine. I am using ppmc boards and EMC2-head. The machine moves positive to the home switch. I have the latch velocity set very low. The machine reverses direction. The machine display sets to zero and counts very slow. The machine will stop momentarily. The display will set to a number that seems to be the disance to the start up position. The machine then moves to the start up position. (display zero) The display turns green. Take a look at the screen shot. Thanks Stuart - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] ENC: G02 and G03 dont Close a Circle
_ De: Fabricio Funes [mailto:[EMAIL PROTECTED] Enviada em: quinta-feira, 17 de maio de 2007 20:10 Para: 'emc-users@lists.sourceforge.net' Assunto: ENC: G02 and G03 dont Close a Circle Hi , I'm using servo-motor with a Vital system. When I use the command G02 or G03 the circle Don't Close. But in the EMC2 Graphical simulation it's close Very Well. How I do to resolve this problem . Thank's - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] ENC: G02 and G03 dont Close a Circle
On Thu, May 17, 2007 at 08:18:20PM -0400, Fabricio Funes wrote: I'm using servo-motor with a Vital system. When I use the command G02 or G03 the circle Don't Close. But in the EMC2 Graphical simulation it's close Very Well. How I do to resolve this problem . Hi Fabricio, you don't give a lot of details about the situation that is giving you trouble so I am making a bit of a guess. If you need to go to exactly the endpoints of every segment and you want to avoid rounded corners (blending) where the segments join, you can specify exact path mode with G61. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users