Re: [Emc-users] ubuntu 10.04 on GA-J1800N-D2P
Thanks for the feedback Dave. One thing that keep me thinking is the pc working with one cpu and not 2. This board come with the w8 uefi thing and users keep complaining at how crap the board bios is :'( El oct 17, 2014 6:25 PM, Dave Cole linuxcncro...@gmail.com escribió: That is an Intel Baytrail based board. You need at least Ubuntu 12.04 and preferably 14.04 to run that board. I think there are video issues with 12.04 and Baytrail unless you run the Vesa drivers and that is a compromise. Google Baytrail Ubuntu for more info. I have Debian Wheezy running on a Baytrail GA J1900N board and that works ok. Super low power consumption of about 6 watts including an SSD. Dave On 10/17/2014 12:02 PM, Ricardo Moscoloni wrote: hi folks, a little question here i was running ubuntu from a stock 10.04 iso. if i select trying ubuntu, OS boot and works ok. after installing didnt boot (constantly reboot after MB vendor logo), but if i disable one core from setup the OS boots fine. the same with debian 7. But install cd didnt boot at all, but it does if i disable one core again. any clue where to look for this? is advisable to test 12.04 to see if some isues is related with new MB or CPU features? thanks for reading! regards Rick -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] F0
Hi i do not know a lot what emc2 can and can not do. so i open for all recommendations. about ---M1xx G1 X100 Y240 F100 so for example instead G1 will be M101G1 and instead G0 will be M102G0 system will pick up M101 and M102 am i right? if so who will altered code that instead G0 put in M102G0 and instead G1 put in M101G1? will CAD/CAM let me do such alteration? is there stand alone software that can do that? All that i want is that when in program show up G0 pin 40 get signal 5V DC and when G1 show up in program pin 45 get 5VDC (pin N as example) System must clearly identify when it moves under G0 or G1. thank you aram On Fri, Oct 17, 2014 at 1:39 PM, alex chiosso achio...@gmail.com wrote: Why do not use a custom M function syncronized to do that ? M1xx G1 X100 Y240 F100 Into the M1xx you can fit the Hal code to perform what you need. Il giorno 17/ott/2014 21:30, a k pccncmach...@gmail.com ha scritto: About: I was wondering if motion.motion-type would work but that distinguishes between lines and arcs rather then feeds or traverses. Motion can be 2 type -- first -- when machine does deposition/cutting - actual work and second - when machine position themself to the next beginning point. when machine does cutting/deposition -- that happened with G1 + feed. when machine position themself to the next beginning point then it use G0 - rapid move. I want really identify what kind of motion in any given moment -- is it G1 (cutting -metal removing etc) or is it G0 (rapid motion to the next starting point) When it is G1 then it will activate deposition system. When motion G0 rapid- then i need to idle deposition system. some idea. On Fri, Oct 17, 2014 at 4:32 AM, andy pugh bodge...@gmail.com wrote: On 17 October 2014 11:35, Marius Alksnys marius.alks...@gmail.com wrote: Maybe motion.current-vel and comp hal component, connected to some output pin will do the task for you? Yes, that is probably easier than a remap, I was answering the question asked rather than the question intended. I was wondering if motion.motion-type would work but that distinguishes between lines and arcs rather then feeds or traverses. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Multiple instances of classicladder
Is it possible to run multiple instances of classicladder? I want to run several identical production lines from one control system using cl. The idea is to design one cl for one line and load them like: loadrt classicladder_rt names=cl1,cl2,cl3,... loadusr classicladder (...) and connect signals to multiple cl instances in hal. I tried names, count, but these arguments are not recognised and this raises an error. Something like this would be useful: loadrt classicladder_rt names=cl1,cl2 addf cl1.refresh some-thread addf cl2.refresh some-thread loadusr classicladder cl1 cl-t1.clp loadusr classicladder cl2 cl-t2.clp I tried also: loadrt classicladder_rt addf classicladder.0.refresh slow-thread loadusr classicladder cl-t1.clp loadusr classicladder cl-t2.clp System loads, but it loads only first loadusr instance and I get this warning: HAL: ERROR: duplicate component name 'classicladder' Any other suggestions? -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Multiple instances of classicladder
It's not currently possible to have multiple instances of classicladder running within the same hal session. I suspect the modifications to do this in classicladder would be complex even for someone familiar with the source code. Jeff -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Multiple instances of classicladder
Hi Marius. CL can run only one instance. Il giorno 18/ott/2014 21:43, Marius Alksnys marius.alks...@gmail.com ha scritto: Is it possible to run multiple instances of classicladder? I want to run several identical production lines from one control system using cl. The idea is to design one cl for one line and load them like: loadrt classicladder_rt names=cl1,cl2,cl3,... loadusr classicladder (...) and connect signals to multiple cl instances in hal. I tried names, count, but these arguments are not recognised and this raises an error. Something like this would be useful: loadrt classicladder_rt names=cl1,cl2 addf cl1.refresh some-thread addf cl2.refresh some-thread loadusr classicladder cl1 cl-t1.clp loadusr classicladder cl2 cl-t2.clp I tried also: loadrt classicladder_rt addf classicladder.0.refresh slow-thread loadusr classicladder cl-t1.clp loadusr classicladder cl-t2.clp System loads, but it loads only first loadusr instance and I get this warning: HAL: ERROR: duplicate component name 'classicladder' Any other suggestions? -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] ubuntu 10.04 on GA-J1800N-D2P
You need to use the latest firmware for the board. I think it is the F3 version. The original version was apparently very buggy. After I upgraded the firmware I found the BIOS to be ok. The J1900's boards performance and hardware is pretty impressive. I would not waste much time trying to get that to run on 10.04. Everything I read says that even Ubtuntu 12.04 was too old for it. Here is a long discussion on the Baytrail boards. http://forum.xbmc.org/showthread.php?tid=184930 The Gigabyte J1900 I have is powered with a Pico power supply and supplied with 12 volts from my lab power supply. The Pico power supply only draws about 1/2 an amp at 12 VDC when idling along running a GPS navigation application. The power input seems to peak at a little less than one amp when it runs full tilt during startup. I think the design is suppose to be a 10 watt TDP and I think it is very close to actually being that. Dave On 10/18/2014 12:38 PM, Ricardo Moscoloni wrote: Thanks for the feedback Dave. One thing that keep me thinking is the pc working with one cpu and not 2. This board come with the w8 uefi thing and users keep complaining at how crap the board bios is :'( El oct 17, 2014 6:25 PM, Dave Cole linuxcncro...@gmail.com escribió: That is an Intel Baytrail based board. You need at least Ubuntu 12.04 and preferably 14.04 to run that board. I think there are video issues with 12.04 and Baytrail unless you run the Vesa drivers and that is a compromise. Google Baytrail Ubuntu for more info. I have Debian Wheezy running on a Baytrail GA J1900N board and that works ok. Super low power consumption of about 6 watts including an SSD. Dave On 10/17/2014 12:02 PM, Ricardo Moscoloni wrote: hi folks, a little question here i was running ubuntu from a stock 10.04 iso. if i select trying ubuntu, OS boot and works ok. after installing didnt boot (constantly reboot after MB vendor logo), but if i disable one core from setup the OS boots fine. the same with debian 7. But install cd didnt boot at all, but it does if i disable one core again. any clue where to look for this? is advisable to test 12.04 to see if some isues is related with new MB or CPU features? thanks for reading! regards Rick -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] How to Migrate from Mach3 to LinuxCNC
There is an article in Digital Machinist, Vol 9 No 3, Fall 2014 with the title Migrating from Mach3 to LinuxCNC by Thomas Allsup (page 24). In case someone wants to check it out. I haven't read it yet. Just thought someone might be interested. ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN Tell me and I forget. Teach me and I remember. Involve me and I learn. - Ben Franklin -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
