Re: [Emc-users] A beginners question about E-Stop and Charge Pumps
All, I just wanted to take a minute and thank all of you for the help, links, advice, (c). I really appreciate it. I have decided that I will bring the software estop out and use it with the mechanical estop(s) to just drop all the power from the motor drivers, Router, Vacuum, (c). I will also bring the estop condition back into LinuxCNC, not because it really matters, but just so the software recognizes the stopped condition. Again, thanks so much for all you help and advice. I really was over thinking it or something. Having been in computer networking in the healthcare industry for the last 15 years, I have got into the habit of over thinking as part of the CYA you perpetually have to do because the government constantly mandates it. You folk really are a blessing to have as a community. Joe Hildreth -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Unable to get Nvidia Graphic Card working with nvidia drivers .
Hi to all. Just an update. I set the isolcpu=1. I disabled the legacy USB support from the BIOS . I finally remove the Nvidia drivers + the NOUVEAU drivers and reboot the system. After that the latency numbers are pretty good (I mean comparing with the previous numbers) . The base thread peak is less than 18000 and the servo thread peak is less than 22000 with : - The internet browser opened and Youtube video playing ; - 3 glxgears sessions opened ; - Libreoffice Draw opened ; - File manager opened and searching files and moving windows on the screen. All this running for a couple of hours. Anyway this is not the best but should be ok. Thans a lot for the help and support you gave me. :-) Alex On Fri, Nov 7, 2014 at 10:13 PM, alex chiosso achio...@gmail.com wrote: Thank you Kirk for your detailed explanation I will try your tips. My cpu is an Intel dual core so isolcpu=1 should be the right one . Alex Il giorno 07/nov/2014 20:12, John Alexander Stewart ivatt...@gmail.com ha scritto: Alex; I've made the isolcpu=1 modification but numbers are always pretty high (6-65000 on both threads) but more stable as I can see. How many cores? If two, the isolcpus=1 is correct; if four, or one or... it may not be. I modified Kent's 07_rtai script to find the pae kernels; someone else (sorry, names are in the script) went through and worked out different cores and what worked well. IIRC his/her comments are in the wiki page and in the 07_rtai script. Just something to check; John. -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
