Re: [Emc-users] FYI, HNC on eBay
On Thu, 2008-06-26 at 08:25 -0700, Kirk Wallace wrote: > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 > At $305 someone got a good deal. If only I had been withing driving distance. :[ -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
Tony Bussan wrote: > Now, nobody bid. It's mine, all mine! > Tony Heh heh! Lucky you! Well, there is a community of EMC retrofit owners developing on these. Jon - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
[EMAIL PROTECTED] wrote: > If you had to take it would still be worth it because nobody makes spindles > > as good as the one in that HNC -Maybe the control would fall off the > > truck on the way home if you were lucky Well, the spindle on my Sheldon R15-6 (D1-6, 2.25" spindle through hole, double-row zero-clearance ball bearings about 5" diameter) is mighty fine, and will go to 1250 RPM without overspeeding the motor. Some models used a two-speed motor to get up to 2500 RPM. I'm not going to do that with a chuck on there. One of these days I will get around to CNC'ing it. I want to make it so it can still be used as a manual lathe. Jon - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
Now, nobody bid. It's mine, all mine! Tony > -Original Message- > From: [EMAIL PROTECTED] [mailto:emc-users- > [EMAIL PROTECTED] On Behalf Of Kirk Wallace > Sent: Thursday, June 26, 2008 10:25 AM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] FYI, HNC on eBay > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC/EMC CNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending > Craftsman AA 109 restoration > Shizuoka ST-N/EMC CNC) > > > - > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
If you had to take it would still be worth it because nobody makes spindles as good as the one in that HNC -Maybe the control would fall off the truck on the way home if you were lucky Terry On Thu Jun 26 21:00 , Jon Elson <[EMAIL PROTECTED]>sent: Kirk Wallace wrote: > On Thu, 2008-06-26 at 11:09 -0500, Jon Elson wrote: > >>Kirk Wallace wrote: >> >>>http://cgi.ebay.com/ws/eBayISAPI.dll\?ViewItem&item=330246010908 >>> >> >>Will they MAKE you take the GE 550 control? If so, you'll have >>to dispose of that clunker. I don't believe there's anything >>there that would be usable. >> >>Jon > > > I reused the servo power supply. There are other higher(ish) current > supplies that might be good for something else. Whenever I need a piece > of wire, screw, switch, etc. I visit the 550. It's like having my own > little RadioShack. > My WHOLE basement is like a Radio Shack, only FAR better! I guess if you don't already have such an archive of goodies, it might be of use. Jon - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Msg sent via CableONE.net MyMail - http://www.cableone.net - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
Kirk Wallace wrote: > On Thu, 2008-06-26 at 11:09 -0500, Jon Elson wrote: > >>Kirk Wallace wrote: >> >>>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 >>> >> >>Will they MAKE you take the GE 550 control? If so, you'll have >>to dispose of that clunker. I don't believe there's anything >>there that would be usable. >> >>Jon > > > I reused the servo power supply. There are other higher(ish) current > supplies that might be good for something else. Whenever I need a piece > of wire, screw, switch, etc. I visit the 550. It's like having my own > little RadioShack. > My WHOLE basement is like a Radio Shack, only FAR better! I guess if you don't already have such an archive of goodies, it might be of use. Jon - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
On Thu, 2008-06-26 at 11:09 -0500, Jon Elson wrote: > Kirk Wallace wrote: > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 > > > Will they MAKE you take the GE 550 control? If so, you'll have > to dispose of that clunker. I don't believe there's anything > there that would be usable. > > Jon I reused the servo power supply. There are other higher(ish) current supplies that might be good for something else. Whenever I need a piece of wire, screw, switch, etc. I visit the 550. It's like having my own little RadioShack. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] FYI, HNC on eBay
Kirk Wallace wrote: > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 > Will they MAKE you take the GE 550 control? If so, you'll have to dispose of that clunker. I don't believe there's anything there that would be usable. Jon - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] FYI, HNC on eBay
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330246010908 -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users