Re: [Emc-users] fest
Ok, the address is 205 Roberts St. Houston, TX 77003. Bush Intercontinental Airport is about 20 miles dead north of us (but it's a pretty straight shot down Hwy 59 to get to us). As for lodging: What level are you looking for? I know there are places that range from seriously sketchy motels to full on five-star hotels within a 5 mile radius. There is a Hilton on the University of Houston campus about 2.5 miles away. Parking is free and should be adequate (especially if we can get that damned red bus...). We can open up the back yard if we have to. If folks want we can make the fest last longer than just the weekend or we can make it just during the week, we're flexible. How many days do the fests normally run? P.S. If anyone is local, we have open houses every Friday and Sunday if you want a tour (or to hang-out). Or send me a message if you want to come by any other time. On Fri, May 30, 2014 at 4:52 PM, Jack Coats j...@coats.org wrote: Someone want to organize it? Lots could be done, but having the personal bandwidth and energy is another thing. On Fri, May 30, 2014 at 3:57 PM, Stuart Stevenson stus...@gmail.com wrote: I never been to a weekend fest. Seems a little short to me. Is this just for Friday, Saturday and Sunday? On Fri, May 30, 2014 at 3:32 PM, Jack Coats j...@coats.org wrote: Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
In Wichita I start it on Monday morning and plan to be done on Sunday evening. People will arrive from Sunday evening and fhrough the week. Then people will be leaving from Wednesday evening through Monday morning. All in all it takes a good week to get everyone here, set up, work done, visiting done, tear down and go home. It has always been a very good rewarding time. A couple days will be fine for a lot of guys. A few - me - will think a couple days is a blink. Although, I am beginning to realize it is just a blink of your eyes between diapers and depends. :) On May 31, 2014 5:44 PM, Chris Kelley tensait...@gmail.com wrote: Ok, the address is 205 Roberts St. Houston, TX 77003. Bush Intercontinental Airport is about 20 miles dead north of us (but it's a pretty straight shot down Hwy 59 to get to us). As for lodging: What level are you looking for? I know there are places that range from seriously sketchy motels to full on five-star hotels within a 5 mile radius. There is a Hilton on the University of Houston campus about 2.5 miles away. Parking is free and should be adequate (especially if we can get that damned red bus...). We can open up the back yard if we have to. If folks want we can make the fest last longer than just the weekend or we can make it just during the week, we're flexible. How many days do the fests normally run? P.S. If anyone is local, we have open houses every Friday and Sunday if you want a tour (or to hang-out). Or send me a message if you want to come by any other time. On Fri, May 30, 2014 at 4:52 PM, Jack Coats j...@coats.org wrote: Someone want to organize it? Lots could be done, but having the personal bandwidth and energy is another thing. On Fri, May 30, 2014 at 3:57 PM, Stuart Stevenson stus...@gmail.com wrote: I never been to a weekend fest. Seems a little short to me. Is this just for Friday, Saturday and Sunday? On Fri, May 30, 2014 at 3:32 PM, Jack Coats j...@coats.org wrote: Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has
Re: [Emc-users] fest
Ok, lets call it from Saturday, October 18 to Saturday, October 24. Though if anyone wants to come early or leave late (or vice versa), well, we'd love to have 'ya. On Sat, May 31, 2014 at 8:43 PM, Stuart Stevenson stus...@gmail.com wrote: In Wichita I start it on Monday morning and plan to be done on Sunday evening. People will arrive from Sunday evening and fhrough the week. Then people will be leaving from Wednesday evening through Monday morning. All in all it takes a good week to get everyone here, set up, work done, visiting done, tear down and go home. It has always been a very good rewarding time. A couple days will be fine for a lot of guys. A few - me - will think a couple days is a blink. Although, I am beginning to realize it is just a blink of your eyes between diapers and depends. :) On May 31, 2014 5:44 PM, Chris Kelley tensait...@gmail.com wrote: Ok, the address is 205 Roberts St. Houston, TX 77003. Bush Intercontinental Airport is about 20 miles dead north of us (but it's a pretty straight shot down Hwy 59 to get to us). As for lodging: What level are you looking for? I know there are places that range from seriously sketchy motels to full on five-star hotels within a 5 mile radius. There is a Hilton on the University of Houston campus about 2.5 miles away. Parking is free and should be adequate (especially if we can get that damned red bus...). We can open up the back yard if we have to. If folks want we can make the fest last longer than just the weekend or we can make it just during the week, we're flexible. How many days do the fests normally run? P.S. If anyone is local, we have open houses every Friday and Sunday if you want a tour (or to hang-out). Or send me a message if you want to come by any other time. On Fri, May 30, 2014 at 4:52 PM, Jack Coats j...@coats.org wrote: Someone want to organize it? Lots could be done, but having the personal bandwidth and energy is another thing. On Fri, May 30, 2014 at 3:57 PM, Stuart Stevenson stus...@gmail.com wrote: I never been to a weekend fest. Seems a little short to me. Is this just for Friday, Saturday and Sunday? On Fri, May 30, 2014 at 3:32 PM, Jack Coats j...@coats.org wrote: Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download
Re: [Emc-users] fest
Houston's on my calendar - :-) JohnS. On Thu, May 29, 2014 at 11:57 PM, Stuart Stevenson stus...@gmail.com wrote: sounds good to me On Thu, May 29, 2014 at 8:16 PM, Chris Kelley tensait...@gmail.com wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. On Tue, May 20, 2014 at 6:39 AM, Stuart Stevenson stus...@gmail.com wrote: Chris, Set it up sometime in the fall when the weather in Houston is cooler. This will also give people time to put the date on their calendar. I doubt you get many date suggestions. Set a date and announce it. You need to get the date set pretty quick if you want to do it this fall. Stuart On Tue, May 20, 2014 at 2:52 AM, Chris Kelley tensait...@gmail.com wrote: Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net
Re: [Emc-users] fest
seems to be on - let's go to Houston Hopefully, see you there! On Fri, May 30, 2014 at 9:09 AM, John Alexander Stewart ivatt...@gmail.com wrote: Houston's on my calendar - :-) JohnS. On Thu, May 29, 2014 at 11:57 PM, Stuart Stevenson stus...@gmail.com wrote: sounds good to me On Thu, May 29, 2014 at 8:16 PM, Chris Kelley tensait...@gmail.com wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. On Tue, May 20, 2014 at 6:39 AM, Stuart Stevenson stus...@gmail.com wrote: Chris, Set it up sometime in the fall when the weather in Houston is cooler. This will also give people time to put the date on their calendar. I doubt you get many date suggestions. Set a date and announce it. You need to get the date set pretty quick if you want to do it this fall. Stuart On Tue, May 20, 2014 at 2:52 AM, Chris Kelley tensait...@gmail.com wrote: Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from
Re: [Emc-users] fest
On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
I never been to a weekend fest. Seems a little short to me. Is this just for Friday, Saturday and Sunday? On Fri, May 30, 2014 at 3:32 PM, Jack Coats j...@coats.org wrote: Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Someone want to organize it? Lots could be done, but having the personal bandwidth and energy is another thing. On Fri, May 30, 2014 at 3:57 PM, Stuart Stevenson stus...@gmail.com wrote: I never been to a weekend fest. Seems a little short to me. Is this just for Friday, Saturday and Sunday? On Fri, May 30, 2014 at 3:32 PM, Jack Coats j...@coats.org wrote: Make that a MeToo for what Bari said! :) I'll probably drive from near Nashville TN if someone needs a lift. On Fri, May 30, 2014 at 1:25 PM, Bari bari00...@gmail.com wrote: On 05/29/2014 08:16 PM, Chris Kelley wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. Where is your space? Will it start on Friday the 17th of October or Saturday the 18th morning? Is there easy and free parking? How far are you from Bush Intercontinental Airport? Any suggestions on where to stay or not to stay? -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ... Jack Whatever you do, work at it with all your heart... Colossians 3:23 If you are not part of the solution, you are part of the precipitate - Henry J. Tillman Anyone who has never made a mistake, has never tried anything new. - Albert Einstein You don't manage people; you manage things. You lead people. - Admiral Grace Hopper, USN a nanosecond is the time it takes electrons to propigate 11.8 inches - - http://youtu.be/JEpsKnWZrJ8 Life is complex: it has a real part and an imaginary part. - Martin Terma -- Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. On Tue, May 20, 2014 at 6:39 AM, Stuart Stevenson stus...@gmail.com wrote: Chris, Set it up sometime in the fall when the weather in Houston is cooler. This will also give people time to put the date on their calendar. I doubt you get many date suggestions. Set a date and announce it. You need to get the date set pretty quick if you want to do it this fall. Stuart On Tue, May 20, 2014 at 2:52 AM, Chris Kelley tensait...@gmail.com wrote: Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium
Re: [Emc-users] fest
sounds good to me On Thu, May 29, 2014 at 8:16 PM, Chris Kelley tensait...@gmail.com wrote: How does the weekend of October 17th sound? I think that's enough time to plan and October is still fall in Houston. On Tue, May 20, 2014 at 6:39 AM, Stuart Stevenson stus...@gmail.com wrote: Chris, Set it up sometime in the fall when the weather in Houston is cooler. This will also give people time to put the date on their calendar. I doubt you get many date suggestions. Set a date and announce it. You need to get the date set pretty quick if you want to do it this fall. Stuart On Tue, May 20, 2014 at 2:52 AM, Chris Kelley tensait...@gmail.com wrote: Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my
Re: [Emc-users] fest
Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Chris, Set it up sometime in the fall when the weather in Houston is cooler. This will also give people time to put the date on their calendar. I doubt you get many date suggestions. Set a date and announce it. You need to get the date set pretty quick if you want to do it this fall. Stuart On Tue, May 20, 2014 at 2:52 AM, Chris Kelley tensait...@gmail.com wrote: Internet? Space? We've got ~26,000 square feet and a fiber business connection (with WiFi). Bring a small machine or big ones, we've got 3-phase. Or play with ours, we've got 4 mills (Sherline to Bridgeport), 2 routers, a mini-lathe, and a plasma table all running LCNC, with a few others slated for conversion. We have a full kitchen for food (Houston also claims more restaurants per capita than anywhere else in the country) and being in the center (more or less) of Houston means all sorts of hotels/motels for lodging. What date works for folks? Pick a date and we'll make it happen. On Mon, May 19, 2014 at 8:33 PM, jeremy youngs jcyoung...@gmail.com wrote: still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net
Re: [Emc-users] Fest
I am offering my shop. Located 13 Miles north of Toledo, Ohio. We are an active user of LinuxCNC not really developers, but would love to help in the process. Lake Erie is close by and the Islands can be a fun diversion as well as Cedar Point for an excuse to bring the family. Currently have three machining centers running Linux and looking to convert a mill. At 13,000 Square feet I am not huge but we can find the room as needed. Jeff Johnson john...@superiorroll.com Superior Roll Turning 734-279-1831 -Original Message- From: emc-users-requ...@lists.sourceforge.net [mailto:emc-users-requ...@lists.sourceforge.net] Sent: Tuesday, May 20, 2014 3:52 AM To: emc-users@lists.sourceforge.net Subject: Emc-users Digest, Vol 97, Issue 62 Send Emc-users mailing list submissions to emc-users@lists.sourceforge.net To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/emc-users or, via email, send a message with subject or body 'help' to emc-users-requ...@lists.sourceforge.net You can reach the person managing the list at emc-users-ow...@lists.sourceforge.net When replying, please edit your Subject line so it is more specific than Re: Contents of Emc-users digest... Today's Topics: 1. Re: Running EMC on older computers (jeremy youngs) 2. Re: Running EMC on older computers (Ralph Stirling) 3. Re: fest (Jon Elson) 4. Re: Running EMC on older computers (Jon Elson) 5. Re: fest (jeremy youngs) 6. Re: Running EMC on older computers (Gregg Eshelman) 7. Re: fest (Chris Kelley) -- Message: 1 Date: Mon, 19 May 2014 20:09:20 -0400 From: jeremy youngs jcyoung...@gmail.com Subject: Re: [Emc-users] Running EMC on older computers To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Message-ID: CA+Mq1eQ=jvgwev_1hepntw8rtpkqcf9kqyhnrmg3ag3kfu6...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 im running a 720, had an old 240 but never used it for lcnc jeremy youngs On Mon, May 19, 2014 at 7:53 PM, Gregg Eshelman g_ala...@yahoo.com wrote: On 5/19/2014 5:36 PM, jeremy youngs wrote: second on the optiplex How about a OptiPlex GX240? --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Message: 2 Date: Tue, 20 May 2014 00:27:03 + From: Ralph Stirling ralph.stirl...@wallawalla.edu Subject: Re: [Emc-users] Running EMC on older computers To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Message-ID: 7pdimk0matmxc2r9gyjs8j0l.1400545638...@email.android.com Content-Type: text/plain; charset=us-ascii I use GX270's successfully, but I didn't care much for running with 260's, so if a 240 is much slower than a 260 I'd keep looking. -- Ralph Gregg Eshelman g_ala...@yahoo.com wrote: On 5/19/2014 5:36 PM, jeremy youngs wrote: second on the optiplex How about a OptiPlex GX240? --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Message: 3 Date: Mon, 19 May 2014 19:54:26 -0500 From: Jon Elson el...@pico-systems.com Subject: Re: [Emc-users] fest To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Message-ID: 537aa7c2.8060...@pico-systems.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze
Re: [Emc-users] Fest
Sorry about the last post.I lurk and don't post too much forgot to delete a bunch of it. And a correction: We are currently running three Turning centers on LCNC not machining centers Jeff Johnson john...@superiorroll.com Superior Roll Turning 734-279-1831 -- Message: 3 Date: Tue, 20 May 2014 07:58:50 -0400 From: Jeff Johnson john...@superiorroll.com Subject: Re: [Emc-users] Fest To: emc-users@lists.sourceforge.net Message-ID: 003201cf7422$dfb69a30$9f23ce90$@superiorroll.com Content-Type: text/plain; charset=us-ascii I am offering my shop. Located 13 Miles north of Toledo, Ohio. We are an active user of LinuxCNC not really developers, but would love to help in the process. Lake Erie is close by and the Islands can be a fun diversion as well as Cedar Point for an excuse to bring the family. Currently have three machining centers running Linux and looking to convert a mill. At 13,000 Square feet I am not huge but we can find the room as needed. Jeff Johnson john...@superiorroll.com Superior Roll Turning 734-279-1831 * -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
still working on getting back to missouri jon, right now it looks like august. After i get back and get things lined back up im thinking my place provides all of the above and 7 miles from the eleven point river. but the earliest i see that working would be next year jeremy youngs On Mon, May 19, 2014 at 8:54 PM, Jon Elson el...@pico-systems.com wrote: On 05/16/2014 10:09 AM, Stuart Stevenson wrote: Guys, Is there anything planned for this summer? OK, I made a vague offer of a get together in the Missouri Ozarks some time ago. BUT -- my friend's nephew went out to the cabin in January, turned on the water system and had pipes blow. I'm afraid he may not have drained the whole system and put antifreeze in the toilets and drain traps. So, there could be a HUGE mess there. My friend has not had a chance to go check the condition. This place does have electricity, but no internet, practically no cell phone service, and very limited accommodations. I offered it only as a place to have a big bull session, and maybe fool around on the river some. It would be MUCH better to have some place with more room, parking, net access and space to bring some small machines. If nothing else materializes, I'll try to set something up for maybe a long weekend once I find out how the cabin survived. Jon -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] fest
Guys, Is there anything planned for this summer? thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
If not, Tx/Rx Labs in Houston is ready and eager to host. On Fri, May 16, 2014 at 10:09 AM, Stuart Stevenson stus...@gmail.comwrote: Guys, Is there anything planned for this summer? thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
I thought there was one scheduled in Houston this summer. I was hoping to go somewhere this summer. On May 16, 2014 5:48 PM, Chris Kelley tensait...@gmail.com wrote: If not, Tx/Rx Labs in Houston is ready and eager to host. On Fri, May 16, 2014 at 10:09 AM, Stuart Stevenson stus...@gmail.com wrote: Guys, Is there anything planned for this summer? thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
It may be a little late for some people to arrange to be there. On May 16, 2014 5:58 PM, Stuart Stevenson stus...@gmail.com wrote: I thought there was one scheduled in Houston this summer. I was hoping to go somewhere this summer. On May 16, 2014 5:48 PM, Chris Kelley tensait...@gmail.com wrote: If not, Tx/Rx Labs in Houston is ready and eager to host. On Fri, May 16, 2014 at 10:09 AM, Stuart Stevenson stus...@gmail.com wrote: Guys, Is there anything planned for this summer? thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free. http://p.sf.net/sfu/SauceLabs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest and Jeff's request for a D510MO
Date: Tue, 26 Oct 2010 20:53:26 -0500 From: Jeff Eplerjep...@unpythonic.net Subject: Re: [Emc-users] fest To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Message-ID:20101027015326.gg15...@unpythonic.net Content-Type: text/plain; charset=us-ascii I'm looking forward to it! I'd love to find a small project to do on an EDM system, since I don't have any experience with that sort of machining. I don't have a specific part or project in mind, though. Is there anyone who is coming who can bring one of these D510MO machines with the EPP problem? If I understand the situation, I may have a plan for working in partial cooperation with linux (basically: believe it about low address, but accept the user's word that the high-address configuration registers are available) but I don't have a system where I can test the code. I assume we'll be able to dig up both a pico card and a mesa epp card to test with. Jeff Gentle persons: I would be pleased to ship a D510MO board directly to Stuart for the fest. I could get it into the UPS store tomorrow. My only requests are (1) you do great things with it and (2) I get it back mañana. Regards, Kent -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest and Jeff's request for a D510MO
Kent, Ship it to MPM Inc 2100 S West St Wichita, KS 67213 I will either ship it back to you or pay for it. thanks Stuart On Wed, Oct 27, 2010 at 2:07 PM, Kent A. Reed knbr...@erols.com wrote: Date: Tue, 26 Oct 2010 20:53:26 -0500 From: Jeff Eplerjep...@unpythonic.net Subject: Re: [Emc-users] fest To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Message-ID:20101027015326.gg15...@unpythonic.net Content-Type: text/plain; charset=us-ascii I'm looking forward to it! I'd love to find a small project to do on an EDM system, since I don't have any experience with that sort of machining. I don't have a specific part or project in mind, though. Is there anyone who is coming who can bring one of these D510MO machines with the EPP problem? If I understand the situation, I may have a plan for working in partial cooperation with linux (basically: believe it about low address, but accept the user's word that the high-address configuration registers are available) but I don't have a system where I can test the code. I assume we'll be able to dig up both a pico card and a mesa epp card to test with. Jeff Gentle persons: I would be pleased to ship a D510MO board directly to Stuart for the fest. I could get it into the UPS store tomorrow. My only requests are (1) you do great things with it and (2) I get it back mañana. Regards, Kent -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- dos centavos -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
On Mon, Oct 25, 2010 at 07:36:48PM -0500, Stuart Stevenson wrote: Gentlemen, Fest is starting Friday 12-Nov-2010 - two weeks from this coming Friday. I'll be there Thursday night - bringing several projects (EMC related and not) - can't wait. Thanks for hosting again! Chris -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Stuart Stevenson wrote: Jon, I hope you can make it. I am sure we can have a good time without you but it would be better with you. Yes, I really wanted to see the Enshu, and also work on the velocity estimate code for the encoder input. I also wanted to bang heads with anyone who is willing to discuss this recurring issue with encoder quantization noise playing havoc with the PID's D term. Jon -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
I'm looking forward to it! I'd love to find a small project to do on an EDM system, since I don't have any experience with that sort of machining. I don't have a specific part or project in mind, though. Is there anyone who is coming who can bring one of these D510MO machines with the EPP problem? If I understand the situation, I may have a plan for working in partial cooperation with linux (basically: believe it about low address, but accept the user's word that the high-address configuration registers are available) but I don't have a system where I can test the code. I assume we'll be able to dig up both a pico card and a mesa epp card to test with. Jeff -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Jeff Epler wrote: I'm looking forward to it! I'd love to find a small project to do on an EDM system, since I don't have any experience with that sort of machining. I don't have a specific part or project in mind, though. Is there anyone who is coming who can bring one of these D510MO machines with the EPP problem? If I understand the situation, I may have a plan for working in partial cooperation with linux (basically: believe it about low address, but accept the user's word that the high-address configuration registers are available) but I don't have a system where I can test the code. I assume we'll be able to dig up both a pico card and a mesa epp card to test with. Matt Shaver ought to have one in time for the fest. I haven't heard for sure if he is coming. I could probably make a USC available even if I can't make it. It ought to pretty easy to override the test in, say, the ppmc driver and do the write to the config reg. It could be made a command line option. This makes a lot of sense to do it that way, I think. (I could even figure out how to code that myself!) Were you thinking of changing hal_parport_get() to do the overriding there? I guess that would perform it in just one place, so that also makes sense. Jon -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] fest
Gentlemen, Fest is starting Friday 12-Nov-2010 - two weeks from this coming Friday. This will last as far into the following week as anyone wants to stay. There is no cost to attend. If you have a project that needs some machine work that you do not have the machine to perform please bring it. This could help you complete your machine. We have grinders, 3, 4, 5 axis mills, 4 axis sinker EDM and 5 axis wire EDM. We have programming systems to program parts. Bring safety glasses. Bring your thinking cap as I have projects that need some thought applied. :) Shop hours are Monday - Thursday 0500 AM - 0100 AM - although we can stay as late as we want - we will be at the shop all weekend also I will try to find some hotel/motel discounts. Hope to see you here. MPM Inc 2100 S West St Wichita, KS 67213 316 945 1227 - shop 316 258 0953 - Stuart's cell www.mpm1.comshop www.mpm1.com:8080 Stuart's stuff thanks Stuart -- dos centavos -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Stuart Stevenson wrote: Gentlemen, Fest is starting Friday 12-Nov-2010 - two weeks from this coming Friday. This will last as far into the following week as anyone wants to stay Well, my boss fouled me up and scheduled an experiment in Texas after the meeting that I told him would not be a conflict. So, he has me scheduled to return to St. Louis on the afternoon of the 13th. GRUMBLE! If things go well, I might be able to escape early enough to pack a few things and attend, but I just don't know if it is going to work out or not. But, I'll try! If I can't make it, I know you guys will have a great time without me! Jon -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] fest
Jon, I hope you can make it. I am sure we can have a good time without you but it would be better with you. Stuart On Mon, Oct 25, 2010 at 8:33 PM, Jon Elson el...@pico-systems.com wrote: Stuart Stevenson wrote: Gentlemen, Fest is starting Friday 12-Nov-2010 - two weeks from this coming Friday. This will last as far into the following week as anyone wants to stay Well, my boss fouled me up and scheduled an experiment in Texas after the meeting that I told him would not be a conflict. So, he has me scheduled to return to St. Louis on the afternoon of the 13th. GRUMBLE! If things go well, I might be able to escape early enough to pack a few things and attend, but I just don't know if it is going to work out or not. But, I'll try! If I can't make it, I know you guys will have a great time without me! Jon -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- dos centavos -- Nokia and ATT present the 2010 Calling All Innovators-North America contest Create new apps games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest Pics (was Thanks, Stuart)
Fine Photos, but is there any way to find out who all these guys are? I guess we know a lot of them from the mail, would be nice to identify faces with it! May's Greetings Peter Blodow At 18:26 27.05.2009, you wrote: http://www.emcsociety.org/EMCFest2009/EMCFest2009Pics.htm Try this... IHS ... Jack On Wed, May 27, 2009 at 12:30 AM, Greg Michalski emc2usrl...@distinctperspectives.com wrote: Jeff Epler wrote: On Tue, May 26, 2009 at 07:22:34PM -0700, John Lichter wrote: I just wan to send out a big THANKS to Stuart for hosting the EMC fest at him place and the same to all the EMC guys that were there. Terry and I made it back Monday evening in good shape and he is ready to try out what he learned. Thanks again, John I agree, a huge thank you goes out to Stuart for hosting the 2009 fest. It was great fun and also productive to meet with these people I've worked with online for months or even years. Jeff Did anyone take any pics at fest? (perhaps I missed a posting...) Greg www.distinctperspectives.com -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest Pics (was Thanks, Stuart)
Hi Peter, that's the wrong EMC fest. Not the EMC (Enhanced Machine Controller), so I have no idea who those people are ;) Regards, Alex - Original Message - From: Peter blodow p.blo...@dreki.de To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Sent: Thursday, May 28, 2009 2:45 PM Subject: Re: [Emc-users] Fest Pics (was Thanks, Stuart) Fine Photos, but is there any way to find out who all these guys are? I guess we know a lot of them from the mail, would be nice to identify faces with it! May's Greetings Peter Blodow At 18:26 27.05.2009, you wrote: http://www.emcsociety.org/EMCFest2009/EMCFest2009Pics.htm Try this... IHS ... Jack On Wed, May 27, 2009 at 12:30 AM, Greg Michalski emc2usrl...@distinctperspectives.com wrote: Jeff Epler wrote: On Tue, May 26, 2009 at 07:22:34PM -0700, John Lichter wrote: I just wan to send out a big THANKS to Stuart for hosting the EMC fest at him place and the same to all the EMC guys that were there. Terry and I made it back Monday evening in good shape and he is ready to try out what he learned. Thanks again, John I agree, a huge thank you goes out to Stuart for hosting the 2009 fest. It was great fun and also productive to meet with these people I've worked with online for months or even years. Jeff Did anyone take any pics at fest? (perhaps I missed a posting...) Greg www.distinctperspectives.com -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest Pics (was Thanks, Stuart)
EMC MEAN ALSO Electro Magnetic Compatability!! Rgds. Issy -Original Message- From: Alex Joni [mailto:alex.j...@robcon.ro] Sent: Thursday, May 28, 2009 3:15 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Fest Pics (was Thanks, Stuart) Hi Peter, that's the wrong EMC fest. Not the EMC (Enhanced Machine Controller), so I have no idea who those people are ;) Regards, Alex - Original Message - From: Peter blodow p.blo...@dreki.de To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net Sent: Thursday, May 28, 2009 2:45 PM Subject: Re: [Emc-users] Fest Pics (was Thanks, Stuart) Fine Photos, but is there any way to find out who all these guys are? I guess we know a lot of them from the mail, would be nice to identify faces with it! May's Greetings Peter Blodow At 18:26 27.05.2009, you wrote: http://www.emcsociety.org/EMCFest2009/EMCFest2009Pics.htm Try this... IHS ... Jack On Wed, May 27, 2009 at 12:30 AM, Greg Michalski emc2usrl...@distinctperspectives.com wrote: Jeff Epler wrote: On Tue, May 26, 2009 at 07:22:34PM -0700, John Lichter wrote: I just wan to send out a big THANKS to Stuart for hosting the EMC fest at him place and the same to all the EMC guys that were there. Terry and I made it back Monday evening in good shape and he is ready to try out what he learned. Thanks again, John I agree, a huge thank you goes out to Stuart for hosting the 2009 fest. It was great fun and also productive to meet with these people I've worked with online for months or even years. Jeff Did anyone take any pics at fest? (perhaps I missed a posting...) Greg www.distinctperspectives.com -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest Pics (was Thanks, Stuart)
http://www.emcsociety.org/EMCFest2009/EMCFest2009Pics.htm Try this... IHS ... Jack On Wed, May 27, 2009 at 12:30 AM, Greg Michalski emc2usrl...@distinctperspectives.com wrote: Jeff Epler wrote: On Tue, May 26, 2009 at 07:22:34PM -0700, John Lichter wrote: I just wan to send out a big THANKS to Stuart for hosting the EMC fest at him place and the same to all the EMC guys that were there. Terry and I made it back Monday evening in good shape and he is ready to try out what he learned. Thanks again, John I agree, a huge thank you goes out to Stuart for hosting the 2009 fest. It was great fun and also productive to meet with these people I've worked with online for months or even years. Jeff Did anyone take any pics at fest? (perhaps I missed a posting...) Greg www.distinctperspectives.com -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest Pics (was Thanks, Stuart)
sorry, wrong EMC fest! IHS ... Jack On Wed, May 27, 2009 at 11:26 AM, Jack Coats j...@coats.org wrote: http://www.emcsociety.org/EMCFest2009/EMCFest2009Pics.htm Try this... IHS ... Jack -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Fest Pics (was Thanks, Stuart)
Jeff Epler wrote: On Tue, May 26, 2009 at 07:22:34PM -0700, John Lichter wrote: I just wan to send out a big THANKS to Stuart for hosting the EMC fest at him place and the same to all the EMC guys that were there. Terry and I made it back Monday evening in good shape and he is ready to try out what he learned. Thanks again, John I agree, a huge thank you goes out to Stuart for hosting the 2009 fest. It was great fun and also productive to meet with these people I've worked with online for months or even years. Jeff Did anyone take any pics at fest? (perhaps I missed a posting...) Greg www.distinctperspectives.com -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side developers brand creativity professionals. Meet the minds behind Google Creative Lab, Visual Complexity, Processing, iPhoneDevCamp as they present alongside digital heavyweights like Barbarian Group, R/GA, Big Spaceship. http://p.sf.net/sfu/creativitycat-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Fest motels
Gentlemen, I drove around Wichita today to find a good cheap motel. I found one. It is clean and nice. First choice is Western Holiday 8925 W. Kellogg Wichita, Ks. 67209 316 722 4241 easy location to/from shop should have plenty of rooms for all if reserved soon enough limited qty nonsmoking internet smoking and nonsmoking bar and grill 33.00 + tax single non 42.00 + tax double non Second choice is Sunset Motel 2328 S. Broadway Wichita, Ks. 67211 316 264 0509 easy location to/from shop limited number of rooms limited qty nonsmoking clean internet $30.00 tax included single call for double rates if needed There are quite a number of motels at this rate. Until today I had never seen a motel in the United States that rates negative STARS to the rating system. I have now. :) I am sure the others are between these. All will negotiate a multi-night discount. Some more than others thanks Stuart -- you can lead a person to knowledge but you cannot make him think -- Register Now Save for Velocity, the Web Performance Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks - Steve Stuart Stevenson wrote: Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. thanks Stuart -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Gentlemen, With an idea of numbers we will explore group rates. There are a few close lodgings. The Days Inn and Hampton are within 1 mile of here. There are quite a few with 5 miles. Stuart On Wed, Mar 25, 2009 at 11:52 AM, Stephen Wille Padnos spad...@sover.net wrote: Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks - Steve Stuart Stevenson wrote: Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. thanks Stuart -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- you can lead a person to knowledge but you cannot make him think -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Stephen Wille Padnos wrote: I just found out that I should be able to go (yay!). Yay see you there! There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks for looking into the group rates. I'd rather stay in a cheap dive and spend all my money on beer. If it's $90 per night i'll probably just sleep in the truck. My plan right now is to arrive late Wednesday night, attend Fest Thursday through Sunday, and leave on Monday morning. -- Sebastian Kuzminsky All my desires and ruminations are no more and no less than eddy currents generated by the gradual exhalation of our universe. And until this great exhalation is finished, my thoughts live on. http://tinyurl.com/c2t5rb -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Stephen Wille Padnos wrote: Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) I am going, for sure! I don't know, yet, if any of my family will be tagging along. I expect to be there for the whole thing, but might arrange to travel there the first day, and arrive that afternoon. (On the other hand, depending if there is a solid agenda drawn up beforehand, I might decide to not miss a good talk the first day, and want to be there the night before.) Jon -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Stephen Wille Padnos wrote: Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks - Steve I'm 99% sure I'm going. A little less sure about dates and times, although I'll probably be there the entire time. The drive is a bit longer than I really want to do, and I can get a $200 round trip ticket from here to Kansas City MO (3 hours away from Wichita). Tickets to Wichita are _much_ more expensive - enough that I can rent a car and drive the three hours, so that is my plan. Anyone who wants to share the ride from KC to Wichita is welcome - I don't know my flight dates and times yet, but get in touch and maybe we can coordinate. $55 is much nicer than $90. I'm cheap, and all I need from a hotel room is walls, roof, shower and bed. I tend to spend very little time at the hotel anyway. Regards, John Kasunich -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Gentlemen, Today, Robert went to three hotels to check availability and price. He will go tomorrow to at least one more. He found the Best Western @ $73.00 + tax / day . These rooms are large enough for two people. I believe we can probably get cheaper rooms. We will find out tomorrow. I will find the cheapest room we can get. Stuart On Wed, Mar 25, 2009 at 9:10 PM, John Kasunich jmkasun...@fastmail.fm wrote: Stephen Wille Padnos wrote: Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks - Steve I'm 99% sure I'm going. A little less sure about dates and times, although I'll probably be there the entire time. The drive is a bit longer than I really want to do, and I can get a $200 round trip ticket from here to Kansas City MO (3 hours away from Wichita). Tickets to Wichita are _much_ more expensive - enough that I can rent a car and drive the three hours, so that is my plan. Anyone who wants to share the ride from KC to Wichita is welcome - I don't know my flight dates and times yet, but get in touch and maybe we can coordinate. $55 is much nicer than $90. I'm cheap, and all I need from a hotel room is walls, roof, shower and bed. I tend to spend very little time at the hotel anyway. Regards, John Kasunich -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- you can lead a person to knowledge but you cannot make him think -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
I may be able to come, my wife with me. I'd probably be there a couple days on the early end of the deal, maybe longer. The lower end prices would suit us much better than the higher for sure. Moses On Wed, 2009-03-25 at 12:52 -0400, Stephen Wille Padnos wrote: Hey folks. I just found out that I should be able to go (yay!). There are two or three hotels near Stuart's place, ranging from $55 or so to $90 or so a night. I'm thinking of calling these places (at least the Days Inn and Hampton Inn) to see about group rates, so I'd like to get a count of people who might attend, and whether they'd need a hotel room. Please respond to this thread if you're thinking about attending, and also give some indication of when you'd be there, probability of going, and whether the prices I mentioned are too high/too low/just right :) Thanks - Steve Stuart Stevenson wrote: Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. thanks Stuart -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
On Sun, 2009-03-15 at 20:34 -0600, Sebastian Kuzminsky wrote: I'm pretty sure i'll make it to the Fest, at least the weekend days. If Sebastian goes, I'll go. I could use some help though; I need to convince Steve Stallings to go because then we can split the driving hotel (it's 1200+ miles...)! So if all of you could badger him mercilessly from now on, that would be great! Thanks, Matt -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
I too am curious where it is on the map, makes all the difference of whether I could come or not. Jim On Mon, Mar 16, 2009 at 10:57 AM, Matt Shaver m...@mattshaver.com wrote: On Sun, 2009-03-15 at 20:34 -0600, Sebastian Kuzminsky wrote: I'm pretty sure i'll make it to the Fest, at least the weekend days. If Sebastian goes, I'll go. I could use some help though; I need to convince Steve Stallings to go because then we can split the driving hotel (it's 1200+ miles...)! So if all of you could badger him mercilessly from now on, that would be great! Thanks, Matt -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Jim Coleman wrote: I too am curious where it is on the map, makes all the difference of whether I could come or not. Toledo, OH, in the Seagate convention center. Jon -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Jon Elson wrote: Jim Coleman wrote: I too am curious where it is on the map, makes all the difference of whether I could come or not. Toledo, OH, in the Seagate convention center. Uh - that's NAMES, right? I think this thread is about the Fest at Stuart's. From Stuart's email (titled address and contact info): MPM Inc. 2100 S West St. Wichita, KS 67213 - Steve -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Jon Elson wrote: Jim Coleman wrote: I too am curious where it is on the map, makes all the difference of whether I could come or not. Toledo, OH, in the Seagate convention center. Nope. There are two threads going on, about two COMPLETELY different events. The NAMES show is in late April, in Toledo, Ohio. It is a model engineering show, with some CNC demos. That is another thread. The Fest mentioned in this thread is a much smaller, EMC-only event that Stuart is offering to host at his shop in Wichita, Kansas, in late May. Regards, John Kasunich -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
John Kasunich wrote: Nope. There are two threads going on, about two COMPLETELY different events. The NAMES show is in late April, in Toledo, Ohio. It is a model engineering show, with some CNC demos. That is another thread. The Fest mentioned in this thread is a much smaller, EMC-only event that Stuart is offering to host at his shop in Wichita, Kansas, in late May. AHHH! Brain fart! Sorry! I'm kind of focusing on NAMES as it comes up in only 4 weeks! Fortunately, I'm not trying to make much new to show there. But, several people are trying to put together a pretty impressive EMC booth at NAMES this year. Yes, of course, the EMC Fest is something else, and SOMEPLACE else, and will be a much more in DEPTH affair for EMC, and I wouldn't miss it for anything. Sorry for causing confusion, and awfully early in the evening for me to be so out of it! Jon -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
count me in. jeff -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
I'm pretty sure i'll make it to the Fest, at least the weekend days. -- Sebastian Kuzminsky -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Fest
Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. thanks Stuart -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
-Original Message- From: Stuart Stevenson [mailto:stus...@gmail.com] Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. thanks Stuart Stuart - Pardon my ignorance but where are you again? Sorry, never committed it to memory (and it's a bit buggy as is) :-( Greg www.distinctperspectives.com -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
Stuart Stevenson wrote: Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. OK Count me in! We will have a meeting room w/AC. The room will have a projector. The room has seating for approx 10 people. There is some space for setup of tables. This is open to anyone wishing to attend. This is focused on EMC. Any and all interested parties are welcome. Other interests are most welcome but be forewarned 'proselytizing' will occur. :) No cost to anyone to attend. No registration necessary. Prior knowledge of the number planning to attend will be appreciated but not necessary. We have no schedule. We have no agenda other than play and projects. :) Bring safety glasses as this is a machine shop. We will be open and running during this time. Hmm, at least for me, ear plugs or protectors sound like a good idea, also. I will have some nice Panasonic brushless motors running on my drives. I just got the boards in for a converter for their proprietary commutation encoding scheme. I will bring my 150 Lb mini-mill as usual. I plan to have a jog pendant fitted to it. As for agenda, I think something I want to tinker with is adding a low-pass filter to the D term of the PID calculation. Jon -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Fest
On Sat, Mar 14, 2009 at 09:18:49AM -0500, Stuart Stevenson wrote: Gentlemen, I am setting up here to host a meeting from Thursday 21, May, 2009 thru Wednesday 27, May, 2009. Sounds like a blast. I will be there. -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Fest 2008
Added a wiki page for fest 2008 http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?EMC_Fest_2008 And added a page for the motor mount project but nothing in it yet. Left most of the outline from this year in there -- and the attendees. Have at it. Rayh - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
