Re: [Emc-users] LinuxCNC 2.9.0Pre not finding tool.tbl
Sorry, stupid problem. I had a thumb drive in the machine and I was looking at the files on the thumb drive. The files on the machine had been overwritten when I installed 2.9.0Pre. I copied the correct files over and cured the problem. > From: Nicklas SB Karlsson > Subject: Re: [Emc-users] LinuxCNC 2.9.0Pre not finding tool.tbl > Date: September 23, 2023 at 11:38:43 AM CDT > To: Alan Condit via Emc-users > > > Also had some problem. If I remember correct space in folder name was the > problem. It happened in newer version but not older. > > Nicklas Karlsson > > > Den 2023-09-23 kl. 17:10, skrev Alan Condit via Emc-users: >> When I edited the tool table under 2.8 it was working fine but now it >> doesn’t work when I try to change tools and surprise, surprise, >> the tool table is blank when I try to edit it. It loads the blank table. I >> have my tool table “tool.tbl” in "~/linuxcnc/configs/" and a copy of my tool >> table “tool.tbl” in the folder with my ini file >> “~/linuxcnc/configs/myCNCLathe/”. It has 9 tools in it and when I compared >> it to a backup and it appears identical. >> My .ini file has >> [EMCIO] >> EMCIO = io >> CYCLE_TIME = 0.100 >> TOOL_TABLE = tool.tbl >> >> Any ideas what is going on? Where is it looking for the tool.tbl? >> >> Thanks, >> Alan >> >> ___ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] LinuxCNC 2.9.0Pre not finding tool.tbl
Also had some problem. If I remember correct space in folder name was the problem. It happened in newer version but not older. Nicklas Karlsson Den 2023-09-23 kl. 17:10, skrev Alan Condit via Emc-users: When I edited the tool table under 2.8 it was working fine but now it doesn’t work when I try to change tools and surprise, surprise, the tool table is blank when I try to edit it. It loads the blank table. I have my tool table “tool.tbl” in "~/linuxcnc/configs/" and a copy of my tool table “tool.tbl” in the folder with my ini file “~/linuxcnc/configs/myCNCLathe/”. It has 9 tools in it and when I compared it to a backup and it appears identical. My .ini file has [EMCIO] EMCIO = io CYCLE_TIME = 0.100 TOOL_TABLE = tool.tbl Any ideas what is going on? Where is it looking for the tool.tbl? Thanks, Alan ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] LinuxCNC 2.9.0Pre not finding tool.tbl
When I edited the tool table under 2.8 it was working fine but now it doesn’t work when I try to change tools and surprise, surprise, the tool table is blank when I try to edit it. It loads the blank table. I have my tool table “tool.tbl” in "~/linuxcnc/configs/" and a copy of my tool table “tool.tbl” in the folder with my ini file “~/linuxcnc/configs/myCNCLathe/”. It has 9 tools in it and when I compared it to a backup and it appears identical. My .ini file has [EMCIO] EMCIO = io CYCLE_TIME = 0.100 TOOL_TABLE = tool.tbl Any ideas what is going on? Where is it looking for the tool.tbl? Thanks, Alan ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users