Re: [Emc-users] Wandering in the wilderness
On Mon, 27 Feb 2023 at 16:16, dave engvall wrote: > I have a Dell 790 with Debian 9 RT with Buster uspace. Hardware is 5i25 > and single 7i76. Boots and comes up in sim mode which pretty much > confirms that I need to flash the card. I am not sure that it does mean that. But then I am not sure what you mean by "sim mode"? What firmware is on the card? (Mesaflash will tell you, though not by name) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Wandering in the wilderness
Hi all, I've pretty much finished the mechanical side of a add-on Y axis for my small mill. New axis is 25 mm rails, 2 nm stepper-servos and glass scales as quality control only. I have a Dell 790 with Debian 9 RT with Buster uspace. Hardware is 5i25 and single 7i76. Boots and comes up in sim mode which pretty much confirms that I need to flash the card. I need 3 axes of stepper for the stepper servos plus estop and not much else. I'm planning on soft limits plus rubber energy absorbers at axis mechanical limits. Will do Armstrong tool change. So what is a best choice for the bit file? Comments and advice please. Thanks. Dave ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users