Re: [e-users] Newbie problem

[The Rasterman]

On Mon, 11 Jul 2016 20:14:11 -0500 Charles  said:

> I just installed Arch on a my new laptop and was trying out 
> Enlightenment (current Arch repository versions).  Whenever I run 
> Elementary, after a while it (Elementary) always locks up--doesn't 
> respond to any keys or mouse.  I can simulate the problem by immediately 
> pressing a backspace when I first load it.  I can do other things in 
> Enlightenment including starting new Elementary instances, but 
> eventually they always lock up.  It's possible it is always caused by 
> backspace although pressing backspace doesn't always cause the problem 
> unless I type it first thing.  Anyway, I have to manually kill the 
> Elementary instances for even the title bar doesn't respond.
> 
> I've done searches and not found anyone else having this problem. My old 
> wm I've used for years, pekwm, works fine so I have no reason to suspect 
> a hardware problem.  Any ideas or suggestions?

you have an scim problem. scim - the scim library hangs in scm trrying to
connect to the scim input server. i don't know why it hangs. even if scim is
run and set up by e it still doesn't work. you have a bug to report to scim
land. oddly enouhg not all arch installs are affected. it works on one of my
arch boxes fine, on the other i get this hang. i've traced it down to there. i
just switched to using ibus on that machine instead of scim :)

-- 
- Codito, ergo sum - "I code, therefore I am" --
The Rasterman (Carsten Haitzler)ras...@rasterman.com


--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie problem

[Charles]

I just installed Arch on a my new laptop and was trying out 
Enlightenment (current Arch repository versions).  Whenever I run 
Elementary, after a while it (Elementary) always locks up--doesn't 
respond to any keys or mouse.  I can simulate the problem by immediately 
pressing a backspace when I first load it.  I can do other things in 
Enlightenment including starting new Elementary instances, but 
eventually they always lock up.  It's possible it is always caused by 
backspace although pressing backspace doesn't always cause the problem 
unless I type it first thing.  Anyway, I have to manually kill the 
Elementary instances for even the title bar doesn't respond.

I've done searches and not found anyone else having this problem. My old 
wm I've used for years, pekwm, works fine so I have no reason to suspect 
a hardware problem.  Any ideas or suggestions?

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] newbie to enlightenment and I have a keyboard issue and another question

[Kevin Martin]

I'm running Fedora rawhide with LXDE and am trying enlightenment as the Window 
Manager for the first time and it seems pretty cool
but I have a couple of problems that I can't seem to get around (and maybe it's 
related to running E and LXDE together, I'm not sure).

My first problem (and maybe the real problem) is that upon getting LXDE and E 
running I see a white line across the middle of the
screen.  That white lines seems to be some kind of demarc between virtual 
screen and non-virtual screen.  If I hover over it I get
an LXDE panel at the bottom of the screen; as soon as I move off the white line 
the E shelf shows at the bottom as expected.

The second issue is that no matter what I start up (xterm, lxterminal, Firefox, 
Thunderbird, etc.) I get *no* ability to type in
them.  I've tried switching focus models to be mouse-over, click to focus, etc. 
but it appears that my focus is lost and I don't
know where the focus might be.  I've had to switch back to a different WM until 
I can get this figured out. 

I'm hoping that some of you might have seen this behaviour before.  I'm trying 
to run enlightenment-0.17.4-4.fc21, FWIW.

Thanks

Kevin

--
Android is increasing in popularity, but the open development platform that
developers love is also attractive to malware creators. Download this white
paper to learn more about secure code signing practices that can help keep
Android apps secure.
http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie to enlightenment and I have a keyboard issue and another question

[The Rasterman]

On Thu, 31 Oct 2013 11:26:29 -0500 Kevin Martin ktm...@gmail.com said:

 I'm running Fedora rawhide with LXDE and am trying enlightenment as the
 Window Manager for the first time and it seems pretty cool but I have a
 couple of problems that I can't seem to get around (and maybe it's related to
 running E and LXDE together, I'm not sure).
 
 My first problem (and maybe the real problem) is that upon getting LXDE and E
 running I see a white line across the middle of the screen.  That white lines
 seems to be some kind of demarc between virtual screen and non-virtual
 screen.  If I hover over it I get an LXDE panel at the bottom of the screen;
 as soon as I move off the white line the E shelf shows at the bottom as
 expected.

well.. there is your problem. its some bit of lxde. don't run xlde stuff and e
together. apps should be fine - but dont go runing xlde panels or wm or
filemanager or anything else. lxterm should be fine - regualr windowed apps
should be fine.

 The second issue is that no matter what I start up (xterm, lxterminal,
 Firefox, Thunderbird, etc.) I get *no* ability to type in them.  I've tried
 switching focus models to be mouse-over, click to focus, etc. but it appears
 that my focus is lost and I don't know where the focus might be.  I've had to
 switch back to a different WM until I can get this figured out. 

i don't know - but i have not seen this before. all i can do is supect its a
similar cause to the above.

 I'm hoping that some of you might have seen this behaviour before.  I'm
 trying to run enlightenment-0.17.4-4.fc21, FWIW.
 
 Thanks
 
 Kevin
 
 --
 Android is increasing in popularity, but the open development platform that
 developers love is also attractive to malware creators. Download this white
 paper to learn more about secure code signing practices that can help keep
 Android apps secure.
 http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 


-- 
- Codito, ergo sum - I code, therefore I am --
The Rasterman (Carsten Haitzler)ras...@rasterman.com


--
Android is increasing in popularity, but the open development platform that
developers love is also attractive to malware creators. Download this white
paper to learn more about secure code signing practices that can help keep
Android apps secure.
http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie to enlightenment and I have a keyboard issue and another question

[Kevin Martin]

On 10/31/13 13:08, Carsten Haitzler (The Rasterman) wrote:
 On Thu, 31 Oct 2013 11:26:29 -0500 Kevin Martin ktm...@gmail.com said:
 
 I'm running Fedora rawhide with LXDE and am trying enlightenment as the
 Window Manager for the first time and it seems pretty cool but I have a
 couple of problems that I can't seem to get around (and maybe it's related to
 running E and LXDE together, I'm not sure).

 My first problem (and maybe the real problem) is that upon getting LXDE and E
 running I see a white line across the middle of the screen.  That white lines
 seems to be some kind of demarc between virtual screen and non-virtual
 screen.  If I hover over it I get an LXDE panel at the bottom of the screen;
 as soon as I move off the white line the E shelf shows at the bottom as
 expected.
 
 well.. there is your problem. its some bit of lxde. don't run xlde stuff and e
 together. apps should be fine - but dont go runing xlde panels or wm or
 filemanager or anything else. lxterm should be fine - regualr windowed apps
 should be fine.
 
 The second issue is that no matter what I start up (xterm, lxterminal,
 Firefox, Thunderbird, etc.) I get *no* ability to type in them.  I've tried
 switching focus models to be mouse-over, click to focus, etc. but it appears
 that my focus is lost and I don't know where the focus might be.  I've had to
 switch back to a different WM until I can get this figured out. 
 
 i don't know - but i have not seen this before. all i can do is supect its a
 similar cause to the above.
 
 I'm hoping that some of you might have seen this behaviour before.  I'm
 trying to run enlightenment-0.17.4-4.fc21, FWIW.

 Thanks

 Kevin

 --
 Android is increasing in popularity, but the open development platform that
 developers love is also attractive to malware creators. Download this white
 paper to learn more about secure code signing practices that can help keep
 Android apps secure.
 http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users

 
 
Hmm, don't I have to have *something* running besides e (like KDE, Gnome, LXDE)?

Kevin

--
Android is increasing in popularity, but the open development platform that
developers love is also attractive to malware creators. Download this white
paper to learn more about secure code signing practices that can help keep
Android apps secure.
http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie to enlightenment and I have a keyboard issue and another question

[Kevin Martin]

On 10/31/2013 01:22 PM, Kevin Martin wrote:
 On 10/31/13 13:08, Carsten Haitzler (The Rasterman) wrote:
 On Thu, 31 Oct 2013 11:26:29 -0500 Kevin Martin ktm...@gmail.com said:

 I'm running Fedora rawhide with LXDE and am trying enlightenment as the
 Window Manager for the first time and it seems pretty cool but I have a
 couple of problems that I can't seem to get around (and maybe it's related 
 to
 running E and LXDE together, I'm not sure).

 My first problem (and maybe the real problem) is that upon getting LXDE and 
 E
 running I see a white line across the middle of the screen.  That white 
 lines
 seems to be some kind of demarc between virtual screen and non-virtual
 screen.  If I hover over it I get an LXDE panel at the bottom of the screen;
 as soon as I move off the white line the E shelf shows at the bottom as
 expected.

 well.. there is your problem. its some bit of lxde. don't run xlde stuff and 
 e
 together. apps should be fine - but dont go runing xlde panels or wm or
 filemanager or anything else. lxterm should be fine - regualr windowed apps
 should be fine.

 The second issue is that no matter what I start up (xterm, lxterminal,
 Firefox, Thunderbird, etc.) I get *no* ability to type in them.  I've tried
 switching focus models to be mouse-over, click to focus, etc. but it appears
 that my focus is lost and I don't know where the focus might be.  I've had 
 to
 switch back to a different WM until I can get this figured out. 

 i don't know - but i have not seen this before. all i can do is supect its a
 similar cause to the above.

 I'm hoping that some of you might have seen this behaviour before.  I'm
 trying to run enlightenment-0.17.4-4.fc21, FWIW.

 Thanks

 Kevin

 --
 Android is increasing in popularity, but the open development platform that
 developers love is also attractive to malware creators. Download this white
 paper to learn more about secure code signing practices that can help keep
 Android apps secure.
 http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users



 Hmm, don't I have to have *something* running besides e (like KDE, Gnome, 
 LXDE)?
 
 Kevin
 
Ok, think I've got it now.  .xinitrc with exec /usr/bin/enlightenment_start 
and then a startx and all looks like it should.

Thanks.

Kevin

--
Android is increasing in popularity, but the open development platform that
developers love is also attractive to malware creators. Download this white
paper to learn more about secure code signing practices that can help keep
Android apps secure.
http://pubads.g.doubleclick.net/gampad/clk?id=65839951iu=/4140/ostg.clktrk
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie e17 questions

[Nathan Hüsken]

Hi,

I am new to e17 and have a questions I was unable to figure out:

How to I set/change the keyboard shortcut for running run everything?
I know how to set a keyboard shortcut, I just do not know how I can
connect it to run everything.

Also, can I have somehow an digital and not an analog clock in the shelf?

Thanks!
Nathan

--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[hannes.janet...@gmail.com]

On Sun, Jun 26, 2011 at 1:43 PM, Nathan Hüsken nathan.hues...@posteo.de wrote:
 Hi,

 I am new to e17 and have a questions I was unable to figure out:

 How to I set/change the keyboard shortcut for running run everything?
 I know how to set a keyboard shortcut, I just do not know how I can
 connect it to run everything.

The action is called 'show everything launcher'

 Also, can I have somehow an digital and not an analog clock in the shelf?


with current svn you can change the clock to digital mode. otherwise
there is tclock module.

BR

 Thanks!
 Nathan

 --
 All of the data generated in your IT infrastructure is seriously valuable.
 Why? It contains a definitive record of application performance, security
 threats, fraudulent activity, and more. Splunk takes this data and makes
 sense of it. IT sense. And common sense.
 http://p.sf.net/sfu/splunk-d2d-c2
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users


--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[Nathan Hüsken]

Hey,

Thanks, setting the show everything launcher to my favorite shortcut
was easy enough.

But I can not find the tclock module. I am on ubunto 11.04 and installed
e17 by apt-get install e17.

I can not find tclock in the modules section. How can I get it?
Thanks!
Nathan

On 06/26/2011 01:52 PM, hannes.janet...@gmail.com wrote:
 On Sun, Jun 26, 2011 at 1:43 PM, Nathan Hüsken nathan.hues...@posteo.de 
 wrote:
 Hi,

 I am new to e17 and have a questions I was unable to figure out:

 How to I set/change the keyboard shortcut for running run everything?
 I know how to set a keyboard shortcut, I just do not know how I can
 connect it to run everything.

 The action is called 'show everything launcher'
 
 Also, can I have somehow an digital and not an analog clock in the shelf?

 
 with current svn you can change the clock to digital mode. otherwise
 there is tclock module.
 
 BR
 
 Thanks!
 Nathan

 --
 All of the data generated in your IT infrastructure is seriously valuable.
 Why? It contains a definitive record of application performance, security
 threats, fraudulent activity, and more. Splunk takes this data and makes
 sense of it. IT sense. And common sense.
 http://p.sf.net/sfu/splunk-d2d-c2
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users

 
 --
 All of the data generated in your IT infrastructure is seriously valuable.
 Why? It contains a definitive record of application performance, security 
 threats, fraudulent activity, and more. Splunk takes this data and makes 
 sense of it. IT sense. And common sense.
 http://p.sf.net/sfu/splunk-d2d-c2
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users


--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[The Rasterman]

On Sun, 26 Jun 2011 14:52:33 +0200 Nathan Hüsken nathan.hues...@posteo.de
said:

ooh packages. those will be behind development. upstream dev has a digital
clock mode3 (clock on clock to get date popup and there's a settings button).
tclock is an optional 3rd party module.

 Hey,
 
 Thanks, setting the show everything launcher to my favorite shortcut
 was easy enough.
 
 But I can not find the tclock module. I am on ubunto 11.04 and installed
 e17 by apt-get install e17.
 
 I can not find tclock in the modules section. How can I get it?
 Thanks!
 Nathan
 
 On 06/26/2011 01:52 PM, hannes.janet...@gmail.com wrote:
  On Sun, Jun 26, 2011 at 1:43 PM, Nathan Hüsken nathan.hues...@posteo.de
  wrote:
  Hi,
 
  I am new to e17 and have a questions I was unable to figure out:
 
  How to I set/change the keyboard shortcut for running run everything?
  I know how to set a keyboard shortcut, I just do not know how I can
  connect it to run everything.
 
  The action is called 'show everything launcher'
  
  Also, can I have somehow an digital and not an analog clock in the shelf?
 
  
  with current svn you can change the clock to digital mode. otherwise
  there is tclock module.
  
  BR
  
  Thanks!
  Nathan
 
  --
  All of the data generated in your IT infrastructure is seriously valuable.
  Why? It contains a definitive record of application performance, security
  threats, fraudulent activity, and more. Splunk takes this data and makes
  sense of it. IT sense. And common sense.
  http://p.sf.net/sfu/splunk-d2d-c2
  ___
  enlightenment-users mailing list
  enlightenment-users@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 
  
  --
  All of the data generated in your IT infrastructure is seriously valuable.
  Why? It contains a definitive record of application performance, security 
  threats, fraudulent activity, and more. Splunk takes this data and makes 
  sense of it. IT sense. And common sense.
  http://p.sf.net/sfu/splunk-d2d-c2
  ___
  enlightenment-users mailing list
  enlightenment-users@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 
 
 --
 All of the data generated in your IT infrastructure is seriously valuable.
 Why? It contains a definitive record of application performance, security 
 threats, fraudulent activity, and more. Splunk takes this data and makes 
 sense of it. IT sense. And common sense.
 http://p.sf.net/sfu/splunk-d2d-c2
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 


-- 
- Codito, ergo sum - I code, therefore I am --
The Rasterman (Carsten Haitzler)ras...@rasterman.com


--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[Alex-P. Natsios]

In that case you most likely will need to fetch the module's source
from the svn and build/install it yourself.

there are instructions for that in the README, in case of a problem
just reply back and we can look at it (to point you to the right
direction) :)

-- 
Regards,

Alex-P. Natsios
(a.k.a Drakevr)

--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[Alex-P. Natsios]

On Sun, Jun 26, 2011 at 11:29 PM,  ny6...@gmail.com wrote:
I don't think Ubuntu comes with developer tools by default, so op would
likely need to install a whole dev group package first.  I recommend that he
do so at his leisure, and learn while he's at it, as the ability to compile
opens up a whole new vista of possibilities.

Terry

ups, Terry send me a direct message so i only directly replied to him ...

[on topic]

ah right, Ubuntu doesn't provide the tools for that.. so in order to
build it he will need the build-essentials package which installs
the necessary development tools.

However as raster said current e17 builds provide such a clock so
well, unless there is no other way, being up to date with it is
advised



-- 
Regards,

Alex-P. Natsios
(a.k.a Drakevr)

--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie e17 questions

[hannes.janet...@gmail.com]

On Sun, Jun 26, 2011 at 10:41 PM, Alex-P. Natsios apnats...@gmail.com wrote:
 On Sun, Jun 26, 2011 at 11:29 PM,  ny6...@gmail.com wrote:
I don't think Ubuntu comes with developer tools by default, so op would
likely need to install a whole dev group package first.  I recommend that he
do so at his leisure, and learn while he's at it, as the ability to compile
opens up a whole new vista of possibilities.

Terry

 ups, Terry send me a direct message so i only directly replied to him ...

 [on topic]

 ah right, Ubuntu doesn't provide the tools for that.. so in order to
 build it he will need the build-essentials package which installs
 the necessary development tools.

 However as raster said current e17 builds provide such a clock so
 well, unless there is no other way, being up to date with it is
 advised


Unfortunately there is still no ppa for e17 snapshots, but being up to
date with e is not that hard either, see
http://trac.enlightenment.org/e/wiki/Installation for a guide.


BR





 --
 Regards,

 Alex-P. Natsios
 (a.k.a Drakevr)

 --
 All of the data generated in your IT infrastructure is seriously valuable.
 Why? It contains a definitive record of application performance, security
 threats, fraudulent activity, and more. Splunk takes this data and makes
 sense of it. IT sense. And common sense.
 http://p.sf.net/sfu/splunk-d2d-c2
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users


--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security 
threats, fraudulent activity, and more. Splunk takes this data and makes 
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2d-c2
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] newbie

[Ernst W. Winter]

Hello everyone,

well I installed enlightenment with e16 on a Lapyop with FreeBSD
8.1-PRERELEASE and it looks nice, Still I will have to get used to do
things in a different way.

I used kde in the beginning but left it for Windowmaker, which is
nice and stable as well fast. Will see if I can mangae to get going
with enlightenment now.

Fist of all where can you change the setins of say xterm and
anohter part I am used is that i have gkrellm2 running as I have most
the things in it I need and want, but how can I put it in say the
right-hand top corner and it will remain there?

Is it also possible to have on the Main menu submenues like I have
with windowmaker?

Thanks in advance if you can help. So far no problems with fonts or
anything else.

Ernst


-- 
()  ascii ribbon campaign - against html e-mail
/\  www.asciiribbon.org   - against proprietary attachments


--

___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie

[Ernst W. Winter]

On Sun, 23 May 2010, Massimo Maiurana wrote:

 Ernst W. Winter, il 23/05/2010 19:37, scrisse:
 
  Fist of all where can you change the setins of say xterm and
  anohter part I am used is that i have gkrellm2 running as I have
  most the things in it I need and want, but how can I put it in
  say the right-hand top corner and it will remain there?
 
 you can configure any window using its menu, which is accessible
 right clicking on the title bar; i guess what you need is in
 other-remember :)
 
I suppose remember is for the applicsation, but how do you set up a
new app and in what way? I started gkrellm form a window but once I
log out and log in again it isn't there and I have to start it asnew.
:-(

Thanks you it is a nice way too to handle things. Working well and
the system ist FAST!!! Hope it stays that way too. :-)

Still much more to learn wiht it, but so far very nice!!!

 for windows without borders, the same menu is accessible through
 alt+right_click in the window.
 
Thank's again, works well and I learned something new.

BTW, what is with e17? I installed e16 with this one.

Ernst

-- 
()  ascii ribbon campaign - against html e-mail
/\  www.asciiribbon.org   - against proprietary attachments


--

___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] [Newbie] Customize the look feel of applications

[Cédric Tabin]

Hi there :)

I just installed Enlightenment E17 from CVS and it runs perfectly ! I juste
have a Look  Feel problem with my applications (firefox, pidgin, ...) =
They all have a flat LF by default :( I don't know if I forgot some USE
variables to have a Enlightenment-compatible look and feel but this is quite
annoying when I see the screenshots on the web site :) Is there a
way/tutorial to do that ?

Here is my USE variables : acpi, alsa, bash-completion, cdr, cups, dvd,
dvdr, fbcon, gif, -gnome, gtk, jack, jpeg, -kde, mp3, pda, png, -qt3, -qt4,
raw, -tk, usb

Thanks for the help !

Regards,
Cedric Tabin
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] [Newbie] Customize the look feel of applications

[Ivan]

You can't just use ETK on GTK applications, you have to rewrite them, and
that's no easy task.
If you want gtk apps to match your E theme, find a gtk theme that matches
as closely as possible, and use it. Google for gtkrc, there are some programs
to set it accordingly if you don't want to do it manually.

On Thu, Feb 14, 2008 at 9:21 PM, Emerson Falcon [EMAIL PROTECTED] wrote:
 Cedric,

I usually use run gtk theme manager to get the themes for firefox and
  pidgin to look as I want them to; usually something rather clean and simple
  to go with the theme I use in E17.  I know that the ETK is being worked on;
  and I don't think applications that do not use the EFL for their base
  reconginize them ie Firefox, pidgen etc. I could be wrong though, a
  developer maybe able to fill you in further on using ETK for those
  applications.

  -Jonathan




  On 2/14/08, Cédric Tabin [EMAIL PROTECTED] wrote:
  
   Hi there :)
  
   I just installed Enlightenment E17 from CVS and it runs perfectly ! I
   juste
   have a Look  Feel problem with my applications (firefox, pidgin, ...) =
   They all have a flat LF by default :( I don't know if I forgot some USE
   variables to have a Enlightenment-compatible look and feel but this is
   quite
   annoying when I see the screenshots on the web site :) Is there a
   way/tutorial to do that ?
  
   Here is my USE variables : acpi, alsa, bash-completion, cdr, cups, dvd,
   dvdr, fbcon, gif, -gnome, gtk, jack, jpeg, -kde, mp3, pda, png, -qt3,
   -qt4,
   raw, -tk, usb
  
   Thanks for the help !
  
   Regards,
   Cedric Tabin
   -
   This SF.net email is sponsored by: Microsoft
   Defy all challenges. Microsoft(R) Visual Studio 2008.
   http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
   ___
   enlightenment-users mailing list
   enlightenment-users@lists.sourceforge.net
   https://lists.sourceforge.net/lists/listinfo/enlightenment-users
  
  -
  This SF.net email is sponsored by: Microsoft
  Defy all challenges. Microsoft(R) Visual Studio 2008.
  http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
  ___
  enlightenment-users mailing list
  enlightenment-users@lists.sourceforge.net
  https://lists.sourceforge.net/lists/listinfo/enlightenment-users

-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] [Newbie] Customize the look feel of applications

[Emerson Falcon]

Cedric,

   I usually use run gtk theme manager to get the themes for firefox and
pidgin to look as I want them to; usually something rather clean and simple
to go with the theme I use in E17.  I know that the ETK is being worked on;
and I don't think applications that do not use the EFL for their base
reconginize them ie Firefox, pidgen etc. I could be wrong though, a
developer maybe able to fill you in further on using ETK for those
applications.

-Jonathan


On 2/14/08, Cédric Tabin [EMAIL PROTECTED] wrote:

 Hi there :)

 I just installed Enlightenment E17 from CVS and it runs perfectly ! I
 juste
 have a Look  Feel problem with my applications (firefox, pidgin, ...) =
 They all have a flat LF by default :( I don't know if I forgot some USE
 variables to have a Enlightenment-compatible look and feel but this is
 quite
 annoying when I see the screenshots on the web site :) Is there a
 way/tutorial to do that ?

 Here is my USE variables : acpi, alsa, bash-completion, cdr, cups, dvd,
 dvdr, fbcon, gif, -gnome, gtk, jack, jpeg, -kde, mp3, pda, png, -qt3,
 -qt4,
 raw, -tk, usb

 Thanks for the help !

 Regards,
 Cedric Tabin
 -
 This SF.net email is sponsored by: Microsoft
 Defy all challenges. Microsoft(R) Visual Studio 2008.
 http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users

-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] [Newbie] Customize the look feel of applications

[Codito]

Hi Cedric,

On Fri, 15 Feb 2008 00:02:17 +0100
Cédric Tabin [EMAIL PROTECTED] wrote:
 I just installed Enlightenment E17 from CVS and it runs perfectly ! I
 juste have a Look  Feel problem with my applications (firefox,
 pidgin, ...) = They all have a flat LF by default :( I don't know
 if I forgot some USE variables to have a Enlightenment-compatible
 look and feel but this is quite annoying when I see the screenshots
 on the web site :) Is there a way/tutorial to do that ?
Welcome to e17 :)
I use gtk-chtheme to change my gtk settings. You can get it from
http://plasmasturm.org/code/gtk-chtheme/

HTH
Arun

-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie: let evas render to a memory buffer?

[Joerg Plewe]

Hi all!

 

I'm new to this list and quite new to Enlightenment as well.

 

While making up a software design, I'm interested whether it is possible to
let evas render into a memory buffer that can be read out afterwards?

 

If so, how to?

 

Any help is deeply appreciated, 

 

- J 

 

-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie

[Bob Schmidt]

Hi All,

I am new to enlightenment, but have been using linux for a while. Is it
possible to put shortcuts to programs on the desktop in e17?

Thanks,
Bob



---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie

[Thomas Kuther]

On Tue, 16 May 2006 12:37:33 -0500
Bob Schmidt [EMAIL PROTECTED] wrote:

 Hi All,
 
 I am new to enlightenment, but have been using linux for a while. Is
 it possible to put shortcuts to programs on the desktop in e17?
 
 Thanks,
 Bob
 

in short words: no.

(that would btw look like win98 then.. eeewwwl :P)
Tom


---
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie help needed

[Gerald Dachs]

You are fooling us, aren't you? First, this is not an enlightenment
question. This is basic c problem.

 unsigned char* data;
 ImlibImage *newIm; ImlibImage *newId;
 int i,j;


I suppose it is a copy and paste error that you have this two times.

   unsigned char* data;
 ImlibImage *newIm; ImlibImage *newId;
 int i,j;

 for(i=190;i280;i++)
   {
 for(j=215;j283;j++)
   {
 = data[3*(i+w*j)+0] = (im-rgb_data[3*(i+w*j)+0]);

You have not allocated memory for data.

 data[3*(i+w*j)+1] = (im-rgb_data[3*(i+w*j)+1]);
data[3*(i+w*j)+2] = (im-rgb_data[3*(i+w*j)+2]);
   }
   }

Gerald





---
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42 plasma tv or your very own
Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] newbie help needed

[Jay]

Hi all,
I m trying to copy a small part of an image and then use the 
information of the small part to generate a new image. its same as 
copy paste scenario.
following is my code can someone please point out where am i going 
wrong and proab give me some suggestions.


The arrow points to where the program crashes.

   Display *disp;
   ImlibData *id;
   XSetWindowAttributes attr;
   Window win;
   ImlibImage *im;
   Pixmap p,m;
   int w,h;

 if (argc=1)
 {
   printf(Usage:n %s image_filen,argv[0]);
   exit(1);
 }

   disp=XOpenDisplay(NULL);

   id=Imlib_init(disp);


   im=Imlib_load_image(id,argv[1]);
  
   w=im-rgb_width;h=im-rgb_height;


   unsigned char* data;
   ImlibImage *newIm; ImlibImage *newId;
   int i,j;

 unsigned char* data;
   ImlibImage *newIm; ImlibImage *newId;
   int i,j;

   for(i=190;i280;i++)
 {
   for(j=215;j283;j++)
 {
= data[3*(i+w*j)+0] = (im-rgb_data[3*(i+w*j)+0]);
   data[3*(i+w*j)+1] = (im-rgb_data[3*(i+w*j)+1]);
   data[3*(i+w*j)+2] = (im-rgb_data[3*(i+w*j)+2]);
 }
 }
   unsigned * val;
   newIm = Imlib_create_image_from_data(newId,data,val,100,68);
thanks in advance
Jay Potharaju

Reality is merely an illusion, albeit a very persistent one.-Einstein 
	



---
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42 plasma tv or your very own
Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie using Didier E16

[Jim Summers]

Hello List,

I have just begun using enlightenment.  I am currently using e16 from 
didier's yum repository.  I then got the e16-epplets-base off of 
sourceforge and did a simple configure; make; make install.


It appears that the epplets were installed in /usr/enlightenment.  I can 
not get any of the epplets to show up in the menuing system and when I 
execute and epplet from the command line I get an error regarding that 
the epplet can not create epplet-config in ~/.enlightenment/..


Which with the didier rpm the user config directory is .e16.

I have also installed the e17 development and wasn't sure if that may be 
confusing them.


I have added /usr/enlightenment to my PATH but no resolve.

Any suggestions on the best way to get the epplets to work with this 
install?


TIA,
jim


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie question: Entrance

[Alejandro Salas]

Hi everyone,

I just compiled e17 and entrance with the get_e.sh
script from rasterman website. On a tutorial
(https://vogelweith.homeftp.net/Linux/e17_en.php#x1-60001.1)
I read the following: 
 Finally, in order for Entrance to start during boot,

 you must create the following links in /etc/rc*.d
with 
 the following command (This command is based on the
wdm  settings):
 # update-rc.d entrance start 99 2 3 4 5 . stop 01 0
1 6 

But I'm a bit lost with that. Could someone explain to
me how I can start Entrance during boot?. 

Thanx


__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Fernando Meira]

Hi,
If you already installed/compiled Entrance, the you just need to configure it (which is recommended but not necessary), using $ edb_gtk_ed /etc/entrance_config.db

So that you start Entrace when you boot, you need to change in /etc/rc.conf the variable DISPLAYMANAGER=entrance


HTH,
Fernando
On 8/19/05, Alejandro Salas [EMAIL PROTECTED] wrote:
Hi everyone,I just compiled e17 and entrance with the get_e.shscript from rasterman website. On a tutorial(https://vogelweith.homeftp.net/Linux/e17_en.php#x1-60001.1
)I read the following: Finally, in order for Entrance to start during boot, you must create the following links in /etc/rc*.dwith the following command (This command is based on the
wdm  settings): # update-rc.d entrance start 99 2 3 4 5 . stop 01 01 6But I'm a bit lost with that. Could someone explain tome how I can start Entrance during boot?.Thanx
__Do You Yahoo!?Tired of spam?Yahoo! Mail has the best spam protection aroundhttp://mail.yahoo.com---
SF.Net email is Sponsored by the Better Software Conference  EXPOSeptember 19-22, 2005 * San Francisco, CA * Development Lifecycle PracticesAgile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf___enlightenment-users mailing list
enlightenment-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Alejandro Salas]

Thanx for your quick response. But I forgot to say
that I'm using Debian sarge, so I don't have that
file. That's why in the tutorial I found they mention
modifying the rc*.d directories, but I don't know
exactly what to do.




Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Fernando Meira]

Ohh.. ok.. and what about this:
# update-rc.d entrance start 99 2 3 4 5 . stop 01 0 1 6 .
as it says in the tutorial...
I don't use Debian, but I'd assume that there is a config file (maybe /etc/rc.d) where you specify your displaymanager..
On 8/19/05, Alejandro Salas [EMAIL PROTECTED] wrote:
Thanx for your quick response. But I forgot to saythat I'm using Debian sarge, so I don't have thatfile. That's why in the tutorial I found they mentionmodifying the rc*.d directories, but I don't knowexactly what to do.
Start your day with Yahoo! - make it your home pagehttp://www.yahoo.com/r/hs---
SF.Net email is Sponsored by the Better Software Conference  EXPOSeptember 19-22, 2005 * San Francisco, CA * Development Lifecycle PracticesAgile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf___enlightenment-users mailing list
enlightenment-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Alejandro Salas]

That worked perfectly. One thing though. I'm testing
e17 but when I have to work I use e16. I just rebooted
my machine to see Entrance, and logged in chose e16,
and a lot of applications (firefox, gaim, eclipse)
have different fonts than the usual ones. (I think
they are the same ones but smaller). Any ideas of why
that happened??

Thanx again



__ 
Yahoo! Mail 
Stay connected, organized, and protected. Take the tour: 
http://tour.mail.yahoo.com/mailtour.html 



---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Tom]

[19/08/2005 -- 16:54u] Alejandro Salas:

 That worked perfectly. One thing though. I'm testing
 e17 but when I have to work I use e16. I just rebooted
 my machine to see Entrance, and logged in chose e16,
 and a lot of applications (firefox, gaim, eclipse)
 have different fonts than the usual ones. (I think
 they are the same ones but smaller). Any ideas of why
 that happened??

I think it is because Entrance doesn't start gnome-settings-daemon at
login. Try running it manually and restart an application to see if it
has any effect.

Cheers,
Tom

-- 
keys: http://tmp.verbreyt.be/files/ (abwaerts.asc  verbreyt.asc)
 ---
np: Heid - Pilgrim of the Sublunary World (4)


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Alejandro Salas]

I can't find such a daemon. Any hints?

__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Anders Trobäck]

On FreeBSD it's:

/usr/X11R6/libexec/gnome-settings-daemon

\\anders


Alejandro Salas wrote:


I can't find such a daemon. Any hints?

__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 



--


Microsoft is not the answer.
Microsoft is the question.
And 'No' is the answer!

http://www.troback.com
-



---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie question: Entrance

[Alejandro Salas]

 I don't know for sure if it is indeed causing your 
 problem; I just
 notice the same thing here when I don't use gdm 
 (regardless of what
 window manager I start), but wdm or plain startx.
 
 Cheers,
 Tom

I don't have that deamon at least from what I could
search (using locate and find, and the paths you guys
mentioned). The font problem seems to affect all gtk
apps, a friend of mine told me that the same bug use
to happend ocasionally in Red Hat (I don't know what
version). In my case it seems to happen every time
that I use entrance.

Any ideas are appreciate it.
Thanx guys for your input

__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


---
SF.Net email is Sponsored by the Better Software Conference  EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile  Plan-Driven Development * Managing Projects  Teams * Testing  QA
Security * Process Improvement  Measurement * http://www.sqe.com/bsce5sf
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie: Solaris 2.9, Ultra 5, e16 installation problem

[Mark R. Bowyer]

And have you ensured that your framebuffer isn't being set to a default 8-bit 
root?  When running Gnome, type xdpyinfo and see what the depth of root 
window is.  This can be controlled with a defdepth 24 added to the last line 
in /etc/dt/config/Xservers - make one if you don't have one - read the man page.

It's more likely that Ben's right and you have an Imlib problem, though.

Mark.

On Tue, 2005-03-01 at 19:07, Ben Rockwood wrote:
 Which packages are you using?  Have you loaded any Blastwave packages, 
 namly Imlib2?
 Have you tested starting from a failsafe terminal session?  Why didn't 
 you use crle?
 
 benr.
 
 
 Victor Norman wrote:
 
 I'm having problems getting enlightenment to work on my machine.
 
 My current working environment is gnome-2.0, started from dtlogin on my 
 Solaris
 2.9 box.
 
 I have downloaded the enlightenment packages for Solaris, and installed them,
 and, after adding /usr/local/enlightenment/bin to my PATH, and /usr/ucblib to
 my LD_LIBRARY_PATH, I got the window manager to come up.  But, the
 colors/pixels were completely screwed up and completely unreadable.  
 
 So, I next downloaded the source and compiled it up and installed it.  Then, 
 I
 found the enlightenment.install in the scripts directory and ran it.  Then,
 when I start up gnome 2.0 from my dtlogin, it starts enlightenment, but then 
 it
 pops up a (very readable :-) dialog box saying that enlightenment has a Bus
 Error.  I have to exit then...
 
 Questions: 
 
 1. any ideas on why the Bus Error?  Any way for me to diagnose it further?
 2. Where in the documentation should I have seen the instructions to run the
 enlightenment.install script.  Please feel free to flame me if I haven't read
 the correct document, and that document is in an obvious place.
 3. Any ideas on why the out-of-the-box pkg didn't work?
 
 Thanks.
 
 Vic
 
 
 
  
 __ 
 Do you Yahoo!? 
 Yahoo! Mail - now with 250MB free storage. Learn more.
 http://info.mail.yahoo.com/mail_250
 
 
 ---
 SF email is sponsored by - The IT Product Guide
 Read honest  candid reviews on hundreds of IT Products from real users.
 Discover which products truly live up to the hype. Start reading now.
 http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
   
 
 
 
 
 ---
 SF email is sponsored by - The IT Product Guide
 Read honest  candid reviews on hundreds of IT Products from real users.
 Discover which products truly live up to the hype. Start reading now.
 http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
-- 
|o o  Developer Technical Support,
 /v\ark R. Bowyer.SPARC House, Guillemont Park,
 `-'  Minley Rd, Blackwater,
  Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG
  Fax: +44 (0)1252 420710 United Kingdom__|



---
SF email is sponsored by - The IT Product Guide
Read honest  candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie: Solaris 2.9, Ultra 5, e16 installation problem

[Ben Rockwood]

Which packages are you using?  Have you loaded any Blastwave packages, 
namly Imlib2?
Have you tested starting from a failsafe terminal session?  Why didn't 
you use crle?

benr.
Victor Norman wrote:
I'm having problems getting enlightenment to work on my machine.
My current working environment is gnome-2.0, started from dtlogin on my Solaris
2.9 box.
I have downloaded the enlightenment packages for Solaris, and installed them,
and, after adding /usr/local/enlightenment/bin to my PATH, and /usr/ucblib to
my LD_LIBRARY_PATH, I got the window manager to come up.  But, the
colors/pixels were completely screwed up and completely unreadable.  

So, I next downloaded the source and compiled it up and installed it.  Then, I
found the enlightenment.install in the scripts directory and ran it.  Then,
when I start up gnome 2.0 from my dtlogin, it starts enlightenment, but then it
pops up a (very readable :-) dialog box saying that enlightenment has a Bus
Error.  I have to exit then...
Questions: 

1. any ideas on why the Bus Error?  Any way for me to diagnose it further?
2. Where in the documentation should I have seen the instructions to run the
enlightenment.install script.  Please feel free to flame me if I haven't read
the correct document, and that document is in an obvious place.
3. Any ideas on why the out-of-the-box pkg didn't work?
Thanks.
Vic

		
__ 
Do you Yahoo!? 
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250

---
SF email is sponsored by - The IT Product Guide
Read honest  candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 


---
SF email is sponsored by - The IT Product Guide
Read honest  candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie: Solaris 2.9, Ultra 5, e16 installation problem

[Mark R. Bowyer]

And have you ensured that your framebuffer isn't being set to a default 8-bit 
root?  When running Gnome, type xdpyinfo and see what the depth of root 
window is.  This can be controlled with a defdepth 24 added to the last line 
in /etc/dt/config/Xservers - make one if you don't have one - read the man page.

It's more likely that Ben's right and you have an Imlib problem, though.

Mark.

On Tue, 2005-03-01 at 19:07, Ben Rockwood wrote:
 Which packages are you using?  Have you loaded any Blastwave packages, 
 namly Imlib2?
 Have you tested starting from a failsafe terminal session?  Why didn't 
 you use crle?
 
 benr.
 
 
 Victor Norman wrote:
 
 I'm having problems getting enlightenment to work on my machine.
 
 My current working environment is gnome-2.0, started from dtlogin on my 
 Solaris
 2.9 box.
 
 I have downloaded the enlightenment packages for Solaris, and installed them,
 and, after adding /usr/local/enlightenment/bin to my PATH, and /usr/ucblib to
 my LD_LIBRARY_PATH, I got the window manager to come up.  But, the
 colors/pixels were completely screwed up and completely unreadable.  
 
 So, I next downloaded the source and compiled it up and installed it.  Then, 
 I
 found the enlightenment.install in the scripts directory and ran it.  Then,
 when I start up gnome 2.0 from my dtlogin, it starts enlightenment, but then 
 it
 pops up a (very readable :-) dialog box saying that enlightenment has a Bus
 Error.  I have to exit then...
 
 Questions: 
 
 1. any ideas on why the Bus Error?  Any way for me to diagnose it further?
 2. Where in the documentation should I have seen the instructions to run the
 enlightenment.install script.  Please feel free to flame me if I haven't read
 the correct document, and that document is in an obvious place.
 3. Any ideas on why the out-of-the-box pkg didn't work?
 
 Thanks.
 
 Vic
 
 
 
  
 __ 
 Do you Yahoo!? 
 Yahoo! Mail - now with 250MB free storage. Learn more.
 http://info.mail.yahoo.com/mail_250
 
 
 ---
 SF email is sponsored by - The IT Product Guide
 Read honest  candid reviews on hundreds of IT Products from real users.
 Discover which products truly live up to the hype. Start reading now.
 http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
   
 
 
 
 
 ---
 SF email is sponsored by - The IT Product Guide
 Read honest  candid reviews on hundreds of IT Products from real users.
 Discover which products truly live up to the hype. Start reading now.
 http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
 ___
 enlightenment-users mailing list
 enlightenment-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
-- 
|o o  Developer Technical Support,
 /v\ark R. Bowyer.SPARC House, Guillemont Park,
 `-'  Minley Rd, Blackwater,
  Tel: +44 (0)1252 420691 Camberley, SURREY, GU17 9QG
  Fax: +44 (0)1252 420710 United Kingdom__|
-- 
o o   mailto:[EMAIL PROTECTED]
/v\ark R. Bowyerhttp://mark.thebowyers.me.uk[EMAIL PROTECTED]
`-'  ---  /\
...fingerprint = 7924 9E9E 7B91 225E B065 \ / ASCII Ribbon Campaign 
1024D/15140DC1   39D0 551D ABE6 1514 0DC1  X  Against HTML Mail
  / \ 
CORRIEARKLET (n.)  The moment at which two people approaching from opposite 
ends of a long passageway, recognice each other and immediately pretend they 
haven't. This is to avoid the ghastly embarrassment of having to continue 
recognising each other the whole length of the corridor.   



---
SF email is sponsored by - The IT Product Guide
Read honest  candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] newbie: Solaris 2.9, Ultra 5, e16 installation problem

[Victor Norman]

I'm having problems getting enlightenment to work on my machine.

My current working environment is gnome-2.0, started from dtlogin on my Solaris
2.9 box.

I have downloaded the enlightenment packages for Solaris, and installed them,
and, after adding /usr/local/enlightenment/bin to my PATH, and /usr/ucblib to
my LD_LIBRARY_PATH, I got the window manager to come up.  But, the
colors/pixels were completely screwed up and completely unreadable.  

So, I next downloaded the source and compiled it up and installed it.  Then, I
found the enlightenment.install in the scripts directory and ran it.  Then,
when I start up gnome 2.0 from my dtlogin, it starts enlightenment, but then it
pops up a (very readable :-) dialog box saying that enlightenment has a Bus
Error.  I have to exit then...

Questions: 

1. any ideas on why the Bus Error?  Any way for me to diagnose it further?
2. Where in the documentation should I have seen the instructions to run the
enlightenment.install script.  Please feel free to flame me if I haven't read
the correct document, and that document is in an obvious place.
3. Any ideas on why the out-of-the-box pkg didn't work?

Thanks.

Vic




__ 
Do you Yahoo!? 
Yahoo! Mail - now with 250MB free storage. Learn more.
http://info.mail.yahoo.com/mail_250


---
SF email is sponsored by - The IT Product Guide
Read honest  candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595alloc_id=14396op=click
___
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie

[Tomas Zulberti]

Hi. I am a newbie using linux (debian sarge), and I have some problems using e:
- I can not edit the menues. I downloaded the e16menuedit, but when I
open it, it tells me that I do not have any file.menu. How can this be
solved??
- The other problem, is that when i move the mouse to the right over,
the screen moves to a blank page. I cant see in the boxes bellow, that
i am in another desktop (is this right). How can i dissable this??

Thanks,
Tomas Zulberti


---
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie

[Roberto Winter]

Hello,

On Tue, 9 Nov 2004 07:47:42 -0300, Tomas Zulberti [EMAIL PROTECTED] wrote:
 Hi. I am a newbie using linux (debian sarge), and I have some problems using 
 e:
 - I can not edit the menues. I downloaded the e16menuedit, but when I
 open it, it tells me that I do not have any file.menu. How can this be
 solved??

You are most likely using an old version of menuedit (if it is below
2, forget it) and those are broken. You'll have to edit them manually.
But it is not that hard, just take a look at:
~/.enlightenment/user_apps.menu for example. Look at all the .menu
files and you'll learn pretty quickly how to use them. Another option
is to download a newer version of menuedit, look for a thread on this
list called e16menuedit2-0.0.1 released 

 - The other problem, is that when i move the mouse to the right over,
 the screen moves to a blank page. I cant see in the boxes bellow, that
 i am in another desktop (is this right). How can i dissable this??

uhn?!?

Regards,
Roberto.
 
 Thanks,
 Tomas Zulberti
 
 ---
 This SF.Net email is sponsored by:
 Sybase ASE Linux Express Edition - download now for FREE
 LinuxWorld Reader's Choice Award Winner for best database on Linux.
 http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
 ___
 enlightenment-users mailing list
 [EMAIL PROTECTED]
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users



---
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie

[Tomas Zulberti]

On Tue, 9 Nov 2004 08:57:19 -0200, Roberto Winter [EMAIL PROTECTED] wrote:
 Hello,
 
 On Tue, 9 Nov 2004 07:47:42 -0300, Tomas Zulberti [EMAIL PROTECTED] wrote:
  Hi. I am a newbie using linux (debian sarge), and I have some problems 
  using e:
  - I can not edit the menues. I downloaded the e16menuedit, but when I
  open it, it tells me that I do not have any file.menu. How can this be
  solved??
 
 You are most likely using an old version of menuedit (if it is below
 2, forget it) and those are broken. You'll have to edit them manually.
 But it is not that hard, just take a look at:
 ~/.enlightenment/user_apps.menu for example. Look at all the .menu
 files and you'll learn pretty quickly how to use them. Another option
 is to download a newer version of menuedit, look for a thread on this
 list called e16menuedit2-0.0.1 released 
 
There is a problem. I do not have any *.menu file in my home. I have them in:
/var/lib/enlightenment.
Should i modify these??

I will rewrite the other problem. When i move the mouse to the right,
all the windows i opened move to the left, leaving me with an empty
desptop. I can see the desktop
I was using, in the boxes at the left (the ones which shows you the
desktop in miniature). I can see that I am another desktop. How can I
dissable this movement??
 
 
 Regards,
 Roberto.
 
  Thanks,
  Tomas Zulberti
 
  ---
  This SF.Net email is sponsored by:
  Sybase ASE Linux Express Edition - download now for FREE
  LinuxWorld Reader's Choice Award Winner for best database on Linux.
  http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
  ___
  enlightenment-users mailing list
  [EMAIL PROTECTED]
  https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 
 
 ---
 This SF.Net email is sponsored by:
 Sybase ASE Linux Express Edition - download now for FREE
 LinuxWorld Reader's Choice Award Winner for best database on Linux.
 http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
 ___
 enlightenment-users mailing list
 [EMAIL PROTECTED]
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users



---
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie

[Roberto Winter]

Hello again,

On Tue, 9 Nov 2004 08:35:06 -0300, Tomas Zulberti [EMAIL PROTECTED] wrote:
 On Tue, 9 Nov 2004 08:57:19 -0200, Roberto Winter [EMAIL PROTECTED] wrote:
 
 
  Hello,
 
  On Tue, 9 Nov 2004 07:47:42 -0300, Tomas Zulberti [EMAIL PROTECTED] wrote:
   Hi. I am a newbie using linux (debian sarge), and I have some problems 
   using e:
   - I can not edit the menues. I downloaded the e16menuedit, but when I
   open it, it tells me that I do not have any file.menu. How can this be
   solved??
 
  You are most likely using an old version of menuedit (if it is below
  2, forget it) and those are broken. You'll have to edit them manually.
  But it is not that hard, just take a look at:
  ~/.enlightenment/user_apps.menu for example. Look at all the .menu
  files and you'll learn pretty quickly how to use them. Another option
  is to download a newer version of menuedit, look for a thread on this
  list called e16menuedit2-0.0.1 released 
  
 There is a problem. I do not have any *.menu file in my home. I have them in:
 /var/lib/enlightenment.
 Should i modify these??

No... copy them to your .enlightenment and edit them there. It is a
better practice, I guess. Unless you want to make changes that will
affect all the users on your computer


 I will rewrite the other problem. When i move the mouse to the right,
 all the windows i opened move to the left, leaving me with an empty
 desptop. I can see the desktop
 I was using, in the boxes at the left (the ones which shows you the
 desktop in miniature). I can see that I am another desktop. How can I
 dissable this movement??
 

Oh! Now I get it! Just right-click on the destop background. A menu
called Settings will show up. Select Virtual Desktop Settings
Now uncheck Enable edge flip. Was that it? You should really take a
look at enlightenment's help (middle-click on bkg and then select
Help) there are a lot of useful information there!

Ciao,
Roberto.

 
 
 
  Regards,
  Roberto.
  
   Thanks,
   Tomas Zulberti
  
   ---
   This SF.Net email is sponsored by:
   Sybase ASE Linux Express Edition - download now for FREE
   LinuxWorld Reader's Choice Award Winner for best database on Linux.
   http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
   ___
   enlightenment-users mailing list
   [EMAIL PROTECTED]
   https://lists.sourceforge.net/lists/listinfo/enlightenment-users
  
  
  ---
  This SF.Net email is sponsored by:
  Sybase ASE Linux Express Edition - download now for FREE
  LinuxWorld Reader's Choice Award Winner for best database on Linux.
  http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
  ___
  enlightenment-users mailing list
  [EMAIL PROTECTED]
  https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 
 
 
 ---
 
 
 This SF.Net email is sponsored by:
 Sybase ASE Linux Express Edition - download now for FREE
 LinuxWorld Reader's Choice Award Winner for best database on Linux.
 http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
 ___
 enlightenment-users mailing list
 [EMAIL PROTECTED]
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users



---
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588alloc_id=12065op=click
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie

[Derek Schaible]

On Tue, 2004-11-09 at 06:48, Roberto Winter wrote:

  I will rewrite the other problem. When i move the mouse to the right,
  all the windows i opened move to the left, leaving me with an empty
  desptop. I can see the desktop
  I was using, in the boxes at the left (the ones which shows you the
  desktop in miniature). I can see that I am another desktop. How can I
  dissable this movement??
  
 
 Oh! Now I get it! Just right-click on the destop background. A menu
 called Settings will show up. Select Virtual Desktop Settings
 Now uncheck Enable edge flip. Was that it? You should really take a
 look at enlightenment's help (middle-click on bkg and then select
 Help) there are a lot of useful information there!

OH!! That's the pager! You don't really want to turn it off, if you get
used to it is fantastic! I can't imagine life without edge scrolling in
some manner between desktops, its one of the best things I enjoy about
using Linux. 

Try it for a while, adjust the sensitivity of the edge scroll/flip
whatever you want to call it. Your desktop organization will
dramatically improve.

-- 
Derek Schaible [EMAIL PROTECTED]
CSSI, Inc.


signature.asc
Description: This is a digitally signed message part

Re: [e-users] newbie question: how to compile CVS file?

[Smoke]

On Wednesday, Aug 18, 2004 at 19:50, Smoke wrote:

nothing, apparently :) Sorry about that. This is what I had typed in,
but forgot save, along with the attachment again...

In case this is of any use to anyone, I wrote a quicky script that
sucks down the latest EFL from CVS and the goes through all the
compilations in order. I've tidied it up a little and commented it in
places, but if you're planning on using it, be sure to check it does
what you want and puts stuff in the right places first. I'm including
it as an attachment. If there are any obvious problems with what it
does, please let me know :)

B*B,
-Smoke.


-- bye!  :) 

Been there, invoked that, got the karma



build.sh
Description: Bourne shell script

Re: [e-users] newbie question: how to compile CVS file?

[Jonathan Charnas]

Actually, they're linked from the source page.
Go on the source page and it'll be linked there as Build Notes -- READ
THIS!.
Of course, it's not in an obvious place, but it's good enough for what my
taste.
For your error, I don't know... I suppose it'll be fixed. Usually it's a
problem with the version of automake/aclocal/autoheader that makes that
for  my gentoo box. You might wanna look into that and see if it helps.
Good Luck
John
--- Shish [EMAIL PROTECTED] wrote:

 I just downloaded  built CVS successfully* from scratch, using the
 instructions here:
 
 http://enlightenment.org/pages/cvsnotes.html (not linked from the menu,
 btw)
 
 After that, the basic apps built fine too
 
 
 
 * emotion doesn't seem to build - one of the libtool commands comes up
 with
 -rpath then some other flags, then it complains that rpath needs an
 absulute
 path. Inserting /usr/local/lib (just a guess) between rpath and the
 next flag
 made it 'make', but then 'make install' failed :( The exact output is
 below. I
 know people don't tend to like complaints about CVS being broken, but I
 felt
 it's appropriate to the the discussion, as a warning or somesuch :)
 
 make:
 /bin/sh ../../../libtool --mode=link gcc  -g -O2  -o
 xineplug_vo_out_emotion.la
 -rpath   -module -avoid-version -L../../../src/lib
 -L../../../src/lib/.libs
 emotion_xine_vo_out.lo
 libtool: link: only absolute run-paths are allowed
 
 after adding -rpath /usr/local/lib, make install:
 /bin/sh ../../../libtool  --mode=install /bin/install -c
 xineplug_vo_out_emotion.la /xineplug_vo_out_emotion.la
 libtool: install: `' must be an absolute directory name
 
 -- Shish
 
 
   
 ___
 Do you Yahoo!?
 Win 1 of 4,000 free domain names from Yahoo! Enter now.
 http://promotions.yahoo.com/goldrush
 
 
 ---
 SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
 Save 50% off Retail on Ink  Toner - Free Shipping and Free Gift.
 http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
 ___
 enlightenment-users mailing list
 [EMAIL PROTECTED]
 https://lists.sourceforge.net/lists/listinfo/enlightenment-users
 




___
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush


---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink  Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie question: how to compile CVS file?

[Justin Rocha (Xenith)]

On Wed, Aug 18, 2004 at 01:17:32PM +0800, in the study, with the lead pipe, Didier 
Casse wrote:
 Suggested order is:
...

You're forgetting imlib2_loaders, which should come after edb/eet but before
evas. And, of course, after imlib2.

And to be picky, emotion requires evas, ecore, and edje (as well as embryo).

# imlib2
# eet
# edb
# imlib2_loaders
# evas
# ecore
# embryo
# edje
# emotion
# epeg
# epsilon
# etox
# esmart
# ewl

-- 
Justin Rocha  KG6SGU
-Xenith || [EMAIL PROTECTED] || http://xenith.org/
JabberID:  [EMAIL PROTECTED]   || AIM:  JustinR98

Enlightenment - http://www.enlightenment.org/


pgpHAQbr4S7bM.pgp
Description: PGP signature

Re: [e-users] newbie question: how to compile CVS file?

[Peter Lundqvist]

On Wed, 18 Aug 2004, Didier Casse wrote:
You have to compile the EFLs in the correct order.
Suggested order is:
# eet
# edb
# imlib2
# embryo
# evas
I'm pretty sure embryo depends on evas.
IIRC it asks for evas-config
ps.
  If any moderator sees this, my previous mail accidently used the wrong
  role (too early in the morning), please don't forward it to the list.
ds.
...http://www.update.uu.se/~peterl.
Peter Lundqvist  /'\ ASCII Ribbon Campaign
Studentv. 32:22B \ / No HTML/RTF in email
752 34 Uppsala×  No Word docs in email
Sweden   / \ Respect for open standards 
--

Viewing people through a filter of religion, race or nationality
is not a  visual problem, it's a heart disease.
 -- Dartwill Aquila (DA)

Re: [e-users] newbie question: how to compile CVS file?

[Smoke]

build.sh
Description: Bourne shell script

Re: [e-users] newbie question: how to compile CVS file?

[The Rasterman]

On Wed, 18 Aug 2004 13:17:00 +0200 (CEST) Peter Lundqvist [EMAIL PROTECTED]
(Bbabbled:
(B
(B On Wed, 18 Aug 2004, Didier Casse wrote:
(B  You have to compile the EFLs in the correct order.
(B  Suggested order is:
(B 
(B  # eet
(B  # edb
(B  # imlib2
(B  # embryo
(B  # evas
(B 
(B I'm pretty sure embryo depends on evas.
(B IIRC it asks for evas-config
(B
(Bno. embryo depends on NOTHING. it has no dependencies at all :)
(B
(B ps.
(BIf any moderator sees this, my previous mail accidently used the wrong
(Brole (too early in the morning), please don't forward it to the list.
(B ds.
(B ...http://www.update.uu.se/~peterl.
(B Peter Lundqvist  /'\ ASCII Ribbon Campaign
(B Studentv. 32:22B \ / No HTML/RTF in email
(B Sweden   / \ Respect for open standards 
(B --
(B 
(B Viewing people through a filter of religion, race or nationality
(B is not a  visual problem, it's a heart disease.
(B   -- Dartwill Aquila (DA)
(B
(B
(B-- 
(B- Codito, ergo sum - "I code, therefore I am" --
(BThe Rasterman (Carsten Haitzler)[EMAIL PROTECTED]
$B7'<*(B - $Bhttp://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
(B___
(Benlightenment-users mailing list
(B[EMAIL PROTECTED]
(Bhttps://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie question: how to compile CVS file?

[The Rasterman]

On Wed, 18 Aug 2004 03:28:50 -0700 "Justin Rocha (Xenith)" [EMAIL PROTECTED]
(Bbabbled:
(B
(B On Wed, Aug 18, 2004 at 01:17:32PM +0800, in the study, with the lead pipe,
(B Didier Casse wrote:
(B  Suggested order is:
(B ...
(B 
(B You're forgetting imlib2_loaders, which should come after edb/eet but before
(B evas. And, of course, after imlib2.
(B
(Bactually imlib2_loaders should come after imlib2 and after edb and eet - but
(Botherwise it doesn't mater - u can compile it last if u want. nothing depends on
(Bimlib2_loaders at compile-time.
(B
(B:)
(B
(B And to be picky, emotion requires evas, ecore, and edje (as well as embryo).
(B
(Bindeed - though edje is only needed for emotion for its test program. i really
(Bshould remove it as a dep... and not have the test prog use edje :)
(B
(B # imlib2
(B # eet
(B # edb
(B # imlib2_loaders
(B # evas
(B # ecore
(B # embryo
(B # edje
(B # emotion
(B # epeg
(B # epsilon
(B # etox
(B # esmart
(B # ewl
(B 
(B -- 
(B Justin Rocha  KG6SGU
(B -Xenith || [EMAIL PROTECTED] || http://xenith.org/
(B JabberID:  [EMAIL PROTECTED]   || AIM:  JustinR98
(B 
(B Enlightenment - http://www.enlightenment.org/
(B 
(B
(B
(B-- 
(B- Codito, ergo sum - "I code, therefore I am" --
(BThe Rasterman (Carsten Haitzler)[EMAIL PROTECTED]
$B7'<*(B - $Bhttp://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
(B___
(Benlightenment-users mailing list
(B[EMAIL PROTECTED]
(Bhttps://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie question: how to compile CVS file?

[Justin Rocha (Xenith)]

On Thu, Aug 19, 2004 at 09:16:49AM +0900, in the study, with the lead pipe, Carsten 
Haitzler wrote:
 actually imlib2_loaders should come after imlib2 and after edb and eet - but
 otherwise it doesn't mater - u can compile it last if u want. nothing depends on
 imlib2_loaders at compile-time.
 
 :)
Really? I thought evas wouldn't have eet/edb support without the loaders. (at
least, that's what I recall from my experiments. :)
-- 
Justin Rocha  KG6SGU
-Xenith || [EMAIL PROTECTED] || http://xenith.org/
JabberID:  [EMAIL PROTECTED]   || AIM:  JustinR98

Enlightenment - http://www.enlightenment.org/


pgpE72oJIXa5j.pgp
Description: PGP signature

Re: [e-users] newbie question: how to compile CVS file?

[The Rasterman]

On Wed, 18 Aug 2004 22:13:01 -0700 "Justin Rocha (Xenith)" [EMAIL PROTECTED]
(Bbabbled:
(B
(B On Thu, Aug 19, 2004 at 09:16:49AM +0900, in the study, with the lead pipe,
(B Carsten Haitzler wrote:
(B  actually imlib2_loaders should come after imlib2 and after edb and eet - but
(B  otherwise it doesn't mater - u can compile it last if u want. nothing
(B  depends on imlib2_loaders at compile-time.
(B  
(B  :)
(B Really? I thought evas wouldn't have eet/edb support without the loaders. (at
(B least, that's what I recall from my experiments. :)
(B
(Bevas doesn't use or know anything about imlib2. :)
(B
(B-- 
(B- Codito, ergo sum - "I code, therefore I am" --
(BThe Rasterman (Carsten Haitzler)[EMAIL PROTECTED]
$B7'<*(B - $Bhttp://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
(B___
(Benlightenment-users mailing list
(B[EMAIL PROTECTED]
(Bhttps://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] newbie question: how to compile CVS file?

[Lydia Zeo]

Hi List,
I downloaded e17 from CVS, but I have no idea how to
compile the ELF. I am beginner to Linux environment (I
am using RH 8.0). What I normally do to compile a
source file are. /configure, make and make install.
But I couldn’t find any configure file in the CVS
source. 
Is there any e17 build guide? I need some pointer……
Thanks in advanced….

Cheers
Lydia




__
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail


---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink  Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] newbie question: how to compile CVS file?

[Didier Casse]

On 17/08/04, at 19:26 -0700, Lydia Zeo [EMAIL PROTECTED] wrote:

 Hi List,
   I downloaded e17 from CVS, but I have no idea how to
 compile the ELF. I am beginner to Linux environment (I
 am using RH 8.0). What I normally do to compile a
 source file are. /configure, make and make install.
 But I couldn’t find any configure file in the CVS
 source.
   Is there any e17 build guide? I need some pointer……
   Thanks in advanced….

 Cheers
 Lydia


cd in the directory and do a

--
./autogen.sh
--

then a

-
make

make install
---
and you're done. :-)

You have to compile the EFLs in the correct order.

Suggested order is:

# eet
# edb
# imlib2
# embryo
# evas
# ecore
# edje
# epeg
# epsilon
# etox
# esmart
# ewl
# iconbar
# engage
# entice
# entrance
# examine
# elicit
# emotion [Well this one you technically can place it anywhere you want
to!]




With kind regards,

Didier.

---
PhD student.

Singapore Synchrotron Light Source (SSLS)
5 Research Link,
Singapore 117603

Email: didierbe at sps dot nus dot edu dot sg

Web: http://ssls.nus.edu.sg





---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink  Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Re: [e-users] Newbie questions

[phriedrich]

Hallo

let's try to find some solutions...

 1) I will use idesk to create icons? How can I start this automatically 
 during the start of E. I searched for a kind of enlightenmentrc but I 
 didn't find it.

The file you search for is ~/.enlightenment/...e_session-XX.snapshots.0
In this file there are listed the parameters for applications which you have remembered
(ALT+rightclick, choose remember) or for this who did this automatically (for example
iconboxes, pagers etc.)
But you can also edit this file with an editor and add some lines:

-snipp-

NEW: transparent.Eterm
NAME: transparent
CLASS: ETERM
DESKTOP: 0
RES: 1280 1024
WH: 394 179
XY: 3 2 0 0
LAYER: 2
STICKY: 1
SHADE: 0
BORDER: BORDERLESS
CMD: Eterm -0 --scrollbar=false --name=transparent --borderless 

-snapp--

This creates a transparent Eterm, on top-left corner of all virtual desktops with a 
size
of 394x179 pixels, which is allways under every other window (the Layer option).

Or quite simple:

-snipp---
NEW: xscreensaver
NAME: xscreensaver
CLASS: xscreensaver
CMD: xscreensaver
snapp-


 
 2) After some time I get confused by the pure amount of windows. There 
 is no tasbar for overview - or is there a possibility to have a look on 
 started apps. I mean a kind of a iconbar not only for iconized apps.

I don't know one
I use 4 virtual desktops (2x2) and the pager shows every application then
Or try ALT-TAB to switch between the applications.
 
 3) Is there a possibility to use a start panel? Perhaps there is a 
 separate plug-in or something similar.

Either you start the gnome-panel or you search the web for FancyLauncher



I hope I could help you

bye

Friedrich


---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa0013ave/direct;at.aspnet_072303_01/01
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

[e-users] Newbie questions

[Christel Dr. Frank Biendara]

Hello,

I really like enlightenment because of his fastness and beauty ;)

In spite of this I have some questions left:

1) I will use idesk to create icons? How can I start this automatically 
during the start of E. I searched for a kind of enlightenmentrc but I 
didn't find it.

2) After some time I get confused by the pure amount of windows. There 
is no tasbar for overview - or is there a possibility to have a look on 
started apps. I mean a kind of a iconbar not only for iconized apps.

3) Is there a possibility to use a start panel? Perhaps there is a 
separate plug-in or something similar.

Thanks in advance for help.

Frank



---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa0013ave/direct;at.aspnet_072303_01/01
___
enlightenment-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/enlightenment-users