RE: OWA Ports
If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
IS the OWA box behind your firewall? -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:48 AM To: Exchange Discussions Subject: RE: OWA Ports Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Re: OWA Ports
XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Re: OWA Ports
Opening a firewall for OWA to talk to the server is no different than opening the firewall for OL clients to talk to the server. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:47 AM Subject: RE: OWA Ports Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- -- -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
Exactly. I think this guy may have his OWA server in the DMZIf so, better to move it to the LAN and just open 443 for SSL -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 7:03 AM To: Exchange Discussions Subject: Re: OWA Ports Opening a firewall for OWA to talk to the server is no different than opening the firewall for OL clients to talk to the server. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:47 AM Subject: RE: OWA Ports Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- -- -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
Yes. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:52 AM To: Exchange Discussions Subject: RE: OWA Ports IS the OWA box behind your firewall? -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:48 AM To: Exchange Discussions Subject: RE: OWA Ports Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
Ahhh. This article says I have to edit the registry for the MTA also. I did not do that. Thanks. Robert -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:02 AM To: Exchange Discussions Subject: Re: OWA Ports XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Re: OWA Ports
Ah... then you're setting the wrong ports anyway. As someone else said you should open 443 on the firewall. What happens behind the firewall is irrelevant to the task at hand. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 9:52 AM Subject: RE: OWA Ports Yes. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:52 AM To: Exchange Discussions Subject: RE: OWA Ports IS the OWA box behind your firewall? -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:48 AM To: Exchange Discussions Subject: RE: OWA Ports Were trying to restrict access to the two ports that OWA uses, rather than keeping all traffic open. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:47 AM To: Exchange Discussions Subject: RE: OWA Ports If you are using OWA, then all you need is HTTP or HTTPS access for your clients. -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 9:41 AM To: Exchange Discussions Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- -- -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- -- -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED
Re: OWA Ports
Well, it doens't matter anway. This is for accessing an Exchange server that is behind a firewall. That's not what you're doing. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 9:58 AM Subject: RE: OWA Ports Ahhh. This article says I have to edit the registry for the MTA also. I did not do that. Thanks. Robert -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:02 AM To: Exchange Discussions Subject: Re: OWA Ports XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
OK, the OWA server IS in the DMZ, sorry about that. -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:59 AM To: Exchange Discussions Subject: Re: OWA Ports Well, it doens't matter anway. This is for accessing an Exchange server that is behind a firewall. That's not what you're doing. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 9:58 AM Subject: RE: OWA Ports Ahhh. This article says I have to edit the registry for the MTA also. I did not do that. Thanks. Robert -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:02 AM To: Exchange Discussions Subject: Re: OWA Ports XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
ugh. Why? -Original Message- From: McCready, Robert [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 11:03 AM To: Exchange Discussions Subject: RE: OWA Ports OK, the OWA server IS in the DMZ, sorry about that. -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:59 AM To: Exchange Discussions Subject: Re: OWA Ports Well, it doens't matter anway. This is for accessing an Exchange server that is behind a firewall. That's not what you're doing. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 9:58 AM Subject: RE: OWA Ports Ahhh. This article says I have to edit the registry for the MTA also. I did not do that. Thanks. Robert -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:02 AM To: Exchange Discussions Subject: Re: OWA Ports XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA Ports
I'm guessing that he's looking at locking down the ports on which the OWA server can connect out. That way, in the event that the box does get hacked, it can only access certain ports on certain parts of the network. Its actually solid theory - but it is a bear to pull off. -- Roger D. Seielstad - MCSE Sr. Systems Administrator Peregrine Systems Atlanta, GA -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:59 AM To: Exchange Discussions Subject: Re: OWA Ports Well, it doens't matter anway. This is for accessing an Exchange server that is behind a firewall. That's not what you're doing. - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 9:58 AM Subject: RE: OWA Ports Ahhh. This article says I have to edit the registry for the MTA also. I did not do that. Thanks. Robert -Original Message- From: Daniel Chenault [mailto:[EMAIL PROTECTED]] Sent: Thursday, April 18, 2002 10:02 AM To: Exchange Discussions Subject: Re: OWA Ports XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) - Original Message - From: McCready, Robert [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports Exchange 5.5, NT 4.0. OK. We are using OWA. Apparently, each time the Exchange Server is rebooted, it randomly assigns ports for the directory and information store by default, therefore, the ports that the client will use must be statically mapped. Following the OWA instructions, I made the following registry entry to TRY and accomplish the static mapping. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerDS\Parameters: From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port for the ENTRY and typed the port number in under VALUE. I also did the same for HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange ServerIS\ParametersSystem: However, each time I reboot, a new port number is assigned. Has anybody else had this problem? Thanks. Robert _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]