Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
> We are most interested in being able to group videos by a certain time > period, e.g., the motion tripped within a particular time period. The > ideal setup would be looking at the concatenating video with two sliders > - one for the beginning and one for the ending and downloading to the > phone. While moving the sliders to see images/time stamps of the video > where to start and stop. The time stamps could be on the original > videos. Is the a video player that might be able to do that? None that I am aware of but personally I would find this kind of method difficult to use. Trail cameras, Zoneminder and other programs tend to save each motion "event" into a separate file with the time and date in the filename. The idea is when you sort your list of video files alphabetically, the oldest video will be at the top and the newest at the end. Each video only contains a recording of the motion - if there is no motion, nothing is recorded. At this point you can play each video one by one by double-clicking on it, or add them all into a playlist in your preferred video player. By skipping to the next video file (usually one button press), you will jump directly to the next time the motion sensor triggered. It makes it very quick to skip through each video, and if you hit one you are interested in you can let it play through to watch it in full. The following video file will be the next event that happened afterwards, so it will be very similar to playing one long concatenated video, except each event is already in a separate file in case you need to send it to someone else or make a copy of it for future reference. > Or, even having one slider and being able to look at a time period after > that. For example, the 20 minutes of video following a certain > identified point of the concatenating video . . . Normally these programs will only record video for a short time after the motion sensor has been triggered. So if you example you have a person enter the camera frame, have a sleep, then get up and leave two hours later, you'll only end up with two events lasting a minute or two each - first when the person enters the frame and again when they exit. Possibly another short video file or two if they roll over in their sleep. But the point is the cameras don't record continuously so you can't get 20 minutes after an event that only lasts for a few seconds. There are other ways to do this (recording continuously and flagging times when events happen) but this is a different problem and solution, and at that point there is nothing to concatenate because you have a continuous recording. Cheers, Adam. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
I will look into Zoneminder, Thanks Anatoly! On 2/23/2022 3:49 AM, Anatoly wrote: On Tue, 22 Feb 2022 14:14:29 -0600 Fred Kemp wrote: I need help in trying to develop a security camera for a remote area of a farm. There is no internet in some places there and some of the motion videos may be long, e.g., 20 to 30 minutes. So, I would like to be able to record these longer motion videos on a Raspberry Pi locally, concatenate them and then be able to somehow quickly review the compilation/concatenated video on a video player and then download the snippet(s) of video to a smart phone. I'm looking for direction as far as software goes. I am not tech savvy but I know enough to see this project possibly going down a number of dead ends as I learn about the limitations of various software packages. Any help would be GREATLY appreciated! I was thinking of possibly: 1. Recording motion using Motion or MotionEyes to a particular directory for the day, 2. Then using FFMpeg to possibly automatically concatenate the videos in that directory into one bigger file, and 3. Then using a video player to scroll through the video and download a particular segment to my iPhone. Is this possible? Thank you in advance for your time! what's about Zoneminder? I'm not using it, but as far as I know it has functionality that is close to what you asking for. But I may be wrong. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe". ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
Thanks again for the information! Sorry for the late reply . . . for some reason, I only just got this . . . I would guess that there is a way to automate that concatenating via FFMpeg and I have a nephew that codes in Linux for a full-time job. I wanted to ask about the Raspberry Pi group what might be the best method(s) and then talk with him . . . We are most interested in being able to group videos by a certain time period, e.g., the motion tripped within a particular time period. The ideal setup would be looking at the concatenating video with two sliders - one for the beginning and one for the ending and downloading to the phone. While moving the sliders to see images/time stamps of the video where to start and stop. The time stamps could be on the original videos. Is the a video player that might be able to do that? Or, even having one slider and being able to look at a time period after that. For example, the 20 minutes of video following a certain identified point of the concatenating video . . . Thanks again for your help, Adam!! Greatly appreciated!! On 2/22/2022 11:03 PM, Adam Nielsen via ffmpeg-user wrote: Thanks about the USB tip. I’m trying to concatenate automatically, however. We have many Arlo cameras where we CAN connect to the internet. Otherwise, you’re right, we could just use a trail cam but the time someone would need to be spending going through assembling videos would not be worth it. Concatenating the videos into one would be fairly straightforward, if somewhat inconvenient (if the video is of leaves blowing you'd have to sit through it in full instead of just skipping to the next video). But if you wanted to do this you could just copy the files off the trail camera and run a short ffmpeg command to join them all together into one video. The hard part of what you ask is using the video player to scroll through the videos and downloading a segment to your phone. Also, how remote is this camera? If you already have Internet-connected cameras that do what you want, have you considered a long range wireless link? Mikrotik is one of the lower priced vendors, with some of their longer range devices apparently being able to maintain a line-of-sight link for 40 km (25 mi) on 2.4 GHz: https://mikrotik.com/products/group/wireless-systems I haven't used any of these products so they are just examples of what's available, not a recommendation. Cheers, Adam. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe". ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
Hi! Another tip, to use a USB mobile internet stick, and you can upload your video files to a Google drive cloud. Fred Kemp ezt írta (időpont: 2022. febr. 22., K, 21:14): > I need help in trying to develop a security camera for a remote > area of a farm. There is no internet in some places there and some of > the motion videos may be long, e.g., 20 to 30 minutes. > > So, I would like to be able to record these longer motion videos on > a Raspberry Pi locally, concatenate them and then be able to somehow > quickly review the compilation/concatenated video on a video player and > then download the snippet(s) of video to a smart phone. > > I'm looking for direction as far as software goes. I am not tech > savvy but I know enough to see this project possibly going down a number > of dead ends as I learn about the limitations of various software > packages. Any help would be GREATLY appreciated! > > I was thinking of possibly: > > 1. Recording motion using Motion or MotionEyes to a particular > directory for the day, > 2. Then using FFMpeg to possibly automatically concatenate the > videos in that directory into one bigger file, and > 3. Then using a video player to scroll through the video and > download a particular segment to my iPhone. > > Is this possible? > > Thank you in advance for your time! > ___ > ffmpeg-user mailing list > ffmpeg-user@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-user > > To unsubscribe, visit link above, or email > ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe". > -- üdv.B ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
On Tue, 22 Feb 2022 14:14:29 -0600 Fred Kemp wrote: > I need help in trying to develop a security camera for a remote > area of a farm. There is no internet in some places there and some > of the motion videos may be long, e.g., 20 to 30 minutes. > > So, I would like to be able to record these longer motion videos > on a Raspberry Pi locally, concatenate them and then be able to > somehow quickly review the compilation/concatenated video on a video > player and then download the snippet(s) of video to a smart phone. > > I'm looking for direction as far as software goes. I am not > tech savvy but I know enough to see this project possibly going down > a number of dead ends as I learn about the limitations of various > software packages. Any help would be GREATLY appreciated! > > I was thinking of possibly: > > 1. Recording motion using Motion or MotionEyes to a particular > directory for the day, > 2. Then using FFMpeg to possibly automatically concatenate the > videos in that directory into one bigger file, and > 3. Then using a video player to scroll through the video and > download a particular segment to my iPhone. > > Is this possible? > > Thank you in advance for your time! what's about Zoneminder? I'm not using it, but as far as I know it has functionality that is close to what you asking for. But I may be wrong. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
> Thanks about the USB tip. I’m trying to concatenate automatically, > however. We have many Arlo cameras where we CAN connect to the > internet. Otherwise, you’re right, we could just use a trail cam but > the time someone would need to be spending going through assembling > videos would not be worth it. Concatenating the videos into one would be fairly straightforward, if somewhat inconvenient (if the video is of leaves blowing you'd have to sit through it in full instead of just skipping to the next video). But if you wanted to do this you could just copy the files off the trail camera and run a short ffmpeg command to join them all together into one video. The hard part of what you ask is using the video player to scroll through the videos and downloading a segment to your phone. Also, how remote is this camera? If you already have Internet-connected cameras that do what you want, have you considered a long range wireless link? Mikrotik is one of the lower priced vendors, with some of their longer range devices apparently being able to maintain a line-of-sight link for 40 km (25 mi) on 2.4 GHz: https://mikrotik.com/products/group/wireless-systems I haven't used any of these products so they are just examples of what's available, not a recommendation. Cheers, Adam. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
Thanks about the USB tip. I’m trying to concatenate automatically, however. We have many Arlo cameras where we CAN connect to the internet. Otherwise, you’re right, we could just use a trail cam but the time someone would need to be spending going through assembling videos would not be worth it. Any programmers I can contact? Sent from my iPhone > On Feb 22, 2022, at 7:46 PM, Adam Nielsen via ffmpeg-user > wrote: > > >> >> I need help in trying to develop a security camera for a remote >> area of a farm. There is no internet in some places there and some of >> the motion videos may be long, e.g., 20 to 30 minutes. >> >> So, I would like to be able to record these longer motion videos on >> a Raspberry Pi locally, concatenate them and then be able to somehow >> quickly review the compilation/concatenated video on a video player and >> then download the snippet(s) of video to a smart phone. > > You're going to have to do a fair bit of programming/scripting to get > this I suspect, as I don't think there's anything around that can do > this out of the box on a Pi. > > However, since you won't want to use an SD card for this (as writing > all the video will kill the SD card very quickly) you'll probably need > to use a USB external hard drive. In this case you could just buy two, > and swap them over when you visit the camera. Then back on another > computer you can flick through the video on the USB hard drive. > >> 1. Recording motion using Motion or MotionEyes to a particular >>directory for the day, >> 2. Then using FFMpeg to possibly automatically concatenate the >>videos in that directory into one bigger file, and >> 3. Then using a video player to scroll through the video and >>download a particular segment to my iPhone. > > Have you considered using a game camera instead of a Raspberry Pi? They > have motion sensors built in, they'll capture video of the motion, and > save each event as a different video file. Then you can visit it, swap > over the memory card, and watch all the videos on any device you can > plug the card into (even a smartphone if you have a card reader for > it). They run off batteries and include infrared lights to capture > video at night, so they are well suited for remote areas where you > don't need a live video feed. > > The only real benefit of using the Pi would be that you get > Ethernet/WiFi on it for remote access/live video, but if you won't be > using that because it's too far away from a WiFi network and you don't > want to use WiFi extenders or dig a cable, using a game camera will > probably save you a huge amount of effort. > > Cheers, > Adam. > ___ > ffmpeg-user mailing list > ffmpeg-user@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-user > > To unsubscribe, visit link above, or email > ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe". ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
> I need help in trying to develop a security camera for a remote > area of a farm. There is no internet in some places there and some of > the motion videos may be long, e.g., 20 to 30 minutes. > > So, I would like to be able to record these longer motion videos on > a Raspberry Pi locally, concatenate them and then be able to somehow > quickly review the compilation/concatenated video on a video player and > then download the snippet(s) of video to a smart phone. You're going to have to do a fair bit of programming/scripting to get this I suspect, as I don't think there's anything around that can do this out of the box on a Pi. However, since you won't want to use an SD card for this (as writing all the video will kill the SD card very quickly) you'll probably need to use a USB external hard drive. In this case you could just buy two, and swap them over when you visit the camera. Then back on another computer you can flick through the video on the USB hard drive. > 1. Recording motion using Motion or MotionEyes to a particular > directory for the day, > 2. Then using FFMpeg to possibly automatically concatenate the > videos in that directory into one bigger file, and > 3. Then using a video player to scroll through the video and > download a particular segment to my iPhone. Have you considered using a game camera instead of a Raspberry Pi? They have motion sensors built in, they'll capture video of the motion, and save each event as a different video file. Then you can visit it, swap over the memory card, and watch all the videos on any device you can plug the card into (even a smartphone if you have a card reader for it). They run off batteries and include infrared lights to capture video at night, so they are well suited for remote areas where you don't need a live video feed. The only real benefit of using the Pi would be that you get Ethernet/WiFi on it for remote access/live video, but if you won't be using that because it's too far away from a WiFi network and you don't want to use WiFi extenders or dig a cable, using a game camera will probably save you a huge amount of effort. Cheers, Adam. ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
Re: [FFmpeg-user] FFMpeg question on Raspberry Pi
Sounds like you want something more like a Ring camera or hunting camera with a bunch of wifi extenders if the farm does have internet. Best of luck. From: ffmpeg-user on behalf of Fred Kemp Sent: Tuesday, February 22, 2022 8:14 PM To: ffmpeg-user@ffmpeg.org Subject: [FFmpeg-user] FFMpeg question on Raspberry Pi I need help in trying to develop a security camera for a remote area of a farm. There is no internet in some places there and some of the motion videos may be long, e.g., 20 to 30 minutes. So, I would like to be able to record these longer motion videos on a Raspberry Pi locally, concatenate them and then be able to somehow quickly review the compilation/concatenated video on a video player and then download the snippet(s) of video to a smart phone. I'm looking for direction as far as software goes. I am not tech savvy but I know enough to see this project possibly going down a number of dead ends as I learn about the limitations of various software packages. Any help would be GREATLY appreciated! I was thinking of possibly: 1. Recording motion using Motion or MotionEyes to a particular directory for the day, 2. Then using FFMpeg to possibly automatically concatenate the videos in that directory into one bigger file, and 3. Then using a video player to scroll through the video and download a particular segment to my iPhone. Is this possible? Thank you in advance for your time! ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe". ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
[FFmpeg-user] FFMpeg question on Raspberry Pi
I need help in trying to develop a security camera for a remote area of a farm. There is no internet in some places there and some of the motion videos may be long, e.g., 20 to 30 minutes. So, I would like to be able to record these longer motion videos on a Raspberry Pi locally, concatenate them and then be able to somehow quickly review the compilation/concatenated video on a video player and then download the snippet(s) of video to a smart phone. I'm looking for direction as far as software goes. I am not tech savvy but I know enough to see this project possibly going down a number of dead ends as I learn about the limitations of various software packages. Any help would be GREATLY appreciated! I was thinking of possibly: 1. Recording motion using Motion or MotionEyes to a particular directory for the day, 2. Then using FFMpeg to possibly automatically concatenate the videos in that directory into one bigger file, and 3. Then using a video player to scroll through the video and download a particular segment to my iPhone. Is this possible? Thank you in advance for your time! ___ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".