Re: [Finale] GROUPS, barlines, instr names
Hi Kim - Groups were reworked in 2011. The short answer is to double click a handle on the brace of the 1st system. Make any changes you want to the group setup here (ie. unchecking show group name). In the upper right hand corner you'll see the group has a defined range. Checking all measures for this group definition will apply it to the entire part. JB Sent from my iPhone using my thumbs w/out a spellchecker On Jul 4, 2012, at 6:22 PM, Kim Richmond jazz...@kimrichmond.com wrote: Here's a question I've been meaning to ask for years and never have. I'm working with MacFin2011. On piano parts, some grand staves have barlines reaching through the staves (treble and bass) the way I want them to, but other systems, later on in the part have barlines only on EACH staff. What is the remedy for that? In Staff Tool/Groups I have designated I want barlines THROUGH both staves. Also, so systems have have Piano out to the left. In Staff Tool/Groups I have designated No Name, also, in the Staff dialog, I have no name. All the best, KIM R ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale
Re: [Finale] GROUPS, barlines, instr names
Thanks JB. Checking all measures does it for the barlines. However, the staff name piano still appears to the left of SOME systems. When I select the handle on one it eliminates the staff name on THAT page (and that page only), but also eliminates the name from the score (which I don't want). Any solution there? Thanks, All the best, KIM R On Jul 5, 2012, at 10:00 AM, finale-requ...@shsu.edu wrote: From: JRB j...@blanemusic.com Subject: Re: [Finale] GROUPS, barlines, instr names To: finale@shsu.edu finale@shsu.edu Message-ID: f6756be5-2913-4538-9cb6-fbeea4425...@blanemusic.com Content-Type: text/plain; charset=us-ascii Hi Kim - Groups were reworked in 2011. The short answer is to double click a handle on the brace of the 1st system. Make any changes you want to the group setup here (ie. unchecking show group name). In the upper right hand corner you'll see the group has a defined range. Checking all measures for this group definition will apply it to the entire part. JB ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale
Re: [Finale] GROUPS, barlines, instr names
Can't be sure what is happening without seeing it but try this: Go back to your score and make sure you have defined the piano group throughout the whole chart. Now return to the part and change the group to not display the name. That might fix your problem. Generating the piano part again may also do it but you may not want lose the work you've done on it. Also, make sure you're changing the group definition to not display the name as opposed to deleting it. You can definitely have the score label and remove it in the part - there just seems to be a necessary order to doing it. Hope that helps! John Blane Blane Music Preparation 1649 Huntington Ln. Highland Park, IL 60035 847 579-9900 847 579-9903 fax www.BlaneMusic.com j...@blanemusic.com On Jul 5, 2012, at 12:35 PM, Kim Richmond wrote: Thanks JB. Checking all measures does it for the barlines. However, the staff name piano still appears to the left of SOME systems. When I select the handle on one it eliminates the staff name on THAT page (and that page only), but also eliminates the name from the score (which I don't want). Any solution there? Thanks, All the best, KIM R On Jul 5, 2012, at 10:00 AM, finale-requ...@shsu.edu wrote: From: JRB j...@blanemusic.com Subject: Re: [Finale] GROUPS, barlines, instr names To: finale@shsu.edu finale@shsu.edu Message-ID: f6756be5-2913-4538-9cb6-fbeea4425...@blanemusic.com Content-Type: text/plain; charset=us-ascii Hi Kim - Groups were reworked in 2011. The short answer is to double click a handle on the brace of the 1st system. Make any changes you want to the group setup here (ie. unchecking show group name). In the upper right hand corner you'll see the group has a defined range. Checking all measures for this group definition will apply it to the entire part. JB ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale
[Finale] GROUPS, barlines, instr names
Here's a question I've been meaning to ask for years and never have. I'm working with MacFin2011. On piano parts, some grand staves have barlines reaching through the staves (treble and bass) the way I want them to, but other systems, later on in the part have barlines only on EACH staff. What is the remedy for that? In Staff Tool/Groups I have designated I want barlines THROUGH both staves. Also, so systems have have Piano out to the left. In Staff Tool/Groups I have designated No Name, also, in the Staff dialog, I have no name. All the best, KIM R ___ Finale mailing list Finale@shsu.edu http://lists.shsu.edu/mailman/listinfo/finale