RE: [Flashcoders] Simple serial reading application
Hi Pedro - thanks for your advice - I`ve downloaded zinc as suggested, got a standard flash application set-up(but not yet working)for reading the comm ports using the zinc additional FScommands(as per the Zinc literature) however for the PPC version i`ve downloaded these Comm FScommands are not listed in the literature. If i include the same actionscript in my programm when i render the application for pocketPC will these Comm port fscommands still be supported, or is there a different method that must be used to read/access the comm port of a PPC ? Danny -Original Message- From: Pedro Furtado [mailto:[EMAIL PROTECTED] Sent: 31 October 2005 18:55 To: 'Flashcoders mailing list' Subject: RE: [Flashcoders] Simple serial reading application Most of my applications that are made in flash use some strange sensor that comes from the serial port ;) that's y I recommended Zinc, I do it pretty much all day, and plus I guess that for your need the lite version should be enough. Plus no licensing ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Hyndman Sent: segunda-feira, 31 de Outubro de 2005 15:39 To: Flashcoders mailing list Subject: RE: [Flashcoders] Simple serial reading application This is a strange thing to want to do in Flash. Is using Flash a requirement? Scott -Original Message- From: [EMAIL PROTECTED] on behalf of Pedro Furtado Sent: Mon 10/31/2005 10:34 AM To: 'Flashcoders mailing list' Cc: Subject:RE: [Flashcoders] Simple serial reading application Try Zinc v2 for PPC. ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Kirkwood Sent: segunda-feira, 31 de Outubro de 2005 14:50 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Simple serial reading application I am a beginner although quick to learn not yet a very good programmer atall. I am currently trying to create a small flash application which will eventually be uploaded to a PDA, I need it to read 192 Bytes from a serial port display this in ascii code. Any help / links / info would be much appeciated as I`ve been searching forums with no avail :o( do i need to use external programming / software etc... to read the serial data first import ? Thanks for your interest, Danny Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you have received this message in error, please notify the sender by e-mail immediately or contact us at [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] and delete the message and attachments from your system and any associated computers without making any copies. Any views expressed in this email are those of the author and may not necessarily represent the views of Balluff Ltd.Please note that the Internet is inherently insecure. It is not appropriate for sensitive material. Please bear this in mind when emailing us. Although we have taken steps to check that this email and any attachments are free from viruses, it is the responsibility of the recipient in keeping with good computing practice to ensure they are actually virus free and Balluff Ltd accepts no responsibility for such viruses. Balluff Ltd. ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential
RE: [Flashcoders] Simple serial reading application
Try Zinc v2 for PPC. ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Kirkwood Sent: segunda-feira, 31 de Outubro de 2005 14:50 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Simple serial reading application I am a beginner although quick to learn not yet a very good programmer atall. I am currently trying to create a small flash application which will eventually be uploaded to a PDA, I need it to read 192 Bytes from a serial port display this in ascii code. Any help / links / info would be much appeciated as I`ve been searching forums with no avail :o( do i need to use external programming / software etc... to read the serial data first import ? Thanks for your interest, Danny Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you have received this message in error, please notify the sender by e-mail immediately or contact us at [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] and delete the message and attachments from your system and any associated computers without making any copies. Any views expressed in this email are those of the author and may not necessarily represent the views of Balluff Ltd.Please note that the Internet is inherently insecure. It is not appropriate for sensitive material. Please bear this in mind when emailing us. Although we have taken steps to check that this email and any attachments are free from viruses, it is the responsibility of the recipient in keeping with good computing practice to ensure they are actually virus free and Balluff Ltd accepts no responsibility for such viruses. Balluff Ltd. ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
RE: [Flashcoders] Simple serial reading application
This is a strange thing to want to do in Flash. Is using Flash a requirement? Scott -Original Message- From: [EMAIL PROTECTED] on behalf of Pedro Furtado Sent: Mon 10/31/2005 10:34 AM To: 'Flashcoders mailing list' Cc: Subject:RE: [Flashcoders] Simple serial reading application Try Zinc v2 for PPC. ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Kirkwood Sent: segunda-feira, 31 de Outubro de 2005 14:50 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Simple serial reading application I am a beginner although quick to learn not yet a very good programmer atall. I am currently trying to create a small flash application which will eventually be uploaded to a PDA, I need it to read 192 Bytes from a serial port display this in ascii code. Any help / links / info would be much appeciated as I`ve been searching forums with no avail :o( do i need to use external programming / software etc... to read the serial data first import ? Thanks for your interest, Danny Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you have received this message in error, please notify the sender by e-mail immediately or contact us at [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] and delete the message and attachments from your system and any associated computers without making any copies. Any views expressed in this email are those of the author and may not necessarily represent the views of Balluff Ltd.Please note that the Internet is inherently insecure. It is not appropriate for sensitive material. Please bear this in mind when emailing us. Although we have taken steps to check that this email and any attachments are free from viruses, it is the responsibility of the recipient in keeping with good computing practice to ensure they are actually virus free and Balluff Ltd accepts no responsibility for such viruses. Balluff Ltd. ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
RE: [Flashcoders] Simple serial reading application
dosn`t have to be flash, but we have a shell everything i need setup in flash im not very good with other softwares- just thought there may be some backdoor way to read com ports to flash. what software would you reccomend scott ? The application is for reading some kind of tag - displaying any information stored on the tag maybe detailing the tag type. Just a standard serial reading software would do (although i`d much rather develop into a personalised program - obviously it would leave much more options for attaching data to pictures etc..) but there seems to be no standard software such as hyperterminal for PPC which dosn`t need a licence for each device (which wouldn`t be acceptable- ideally the solution would beable to be ran straight from an SSD card) I`ll have a look at Zinc V2 - looks very expensive though just to give me the possibility to read from a comm port, but i suppose if it gets the job done ;o) Much appreciate you feedback time Danny -Original Message- From: Scott Hyndman [mailto:[EMAIL PROTECTED] Sent: 31 October 2005 15:39 To: Flashcoders mailing list Subject: RE: [Flashcoders] Simple serial reading application This is a strange thing to want to do in Flash. Is using Flash a requirement? Scott -Original Message- From: [EMAIL PROTECTED] on behalf of Pedro Furtado Sent: Mon 10/31/2005 10:34 AM To: 'Flashcoders mailing list' Cc: Subject:RE: [Flashcoders] Simple serial reading application Try Zinc v2 for PPC. ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Kirkwood Sent: segunda-feira, 31 de Outubro de 2005 14:50 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Simple serial reading application I am a beginner although quick to learn not yet a very good programmer atall. I am currently trying to create a small flash application which will eventually be uploaded to a PDA, I need it to read 192 Bytes from a serial port display this in ascii code. Any help / links / info would be much appeciated as I`ve been searching forums with no avail :o( do i need to use external programming / software etc... to read the serial data first import ? Thanks for your interest, Danny Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you have received this message in error, please notify the sender by e-mail immediately or contact us at [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] and delete the message and attachments from your system and any associated computers without making any copies. Any views expressed in this email are those of the author and may not necessarily represent the views of Balluff Ltd.Please note that the Internet is inherently insecure. It is not appropriate for sensitive material. Please bear this in mind when emailing us. Although we have taken steps to check that this email and any attachments are free from viruses, it is the responsibility of the recipient in keeping with good computing practice to ensure they are actually virus free and Balluff Ltd accepts no responsibility for such viruses. Balluff Ltd. ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you
Re: [Flashcoders] Simple serial reading application
Try Google. I came up with this tutorial http://people.interaction-ivrea.it/h.barragan/flashserialinterface.html It does not describe how to write the server but that might come from the manufacturere of the device. Ron Danny Kirkwood wrote: dosn`t have to be flash, but we have a shell everything i need setup in flash im not very good with other softwares- just thought there may be some backdoor way to read com ports to flash. what software would you reccomend scott ? The application is for reading some kind of tag - displaying any information stored on the tag maybe detailing the tag type. Just a standard serial reading software would do (although i`d much rather develop into a personalised program - obviously it would leave much more options for attaching data to pictures etc..) but there seems to be no standard software such as hyperterminal for PPC which dosn`t need a licence for each device (which wouldn`t be acceptable- ideally the solution would beable to be ran straight from an SSD card) I`ll have a look at Zinc V2 - looks very expensive though just to give me the possibility to read from a comm port, but i suppose if it gets the job done ;o) Much appreciate you feedback time Danny -Original Message- From: Scott Hyndman [mailto:[EMAIL PROTECTED] Sent: 31 October 2005 15:39 To: Flashcoders mailing list Subject: RE: [Flashcoders] Simple serial reading application This is a strange thing to want to do in Flash. Is using Flash a requirement? Scott -Original Message- From: [EMAIL PROTECTED] on behalf of Pedro Furtado Sent: Mon 10/31/2005 10:34 AM To: 'Flashcoders mailing list' Cc: Subject:RE: [Flashcoders] Simple serial reading application Try Zinc v2 for PPC. ;) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Kirkwood Sent: segunda-feira, 31 de Outubro de 2005 14:50 To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] Simple serial reading application I am a beginner although quick to learn not yet a very good programmer atall. I am currently trying to create a small flash application which will eventually be uploaded to a PDA, I need it to read 192 Bytes from a serial port display this in ascii code. Any help / links / info would be much appeciated as I`ve been searching forums with no avail :o( do i need to use external programming / software etc... to read the serial data first import ? Thanks for your interest, Danny Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is strictly unauthorised and prohibited. If you have received this message in error, please notify the sender by e-mail immediately or contact us at [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] and delete the message and attachments from your system and any associated computers without making any copies. Any views expressed in this email are those of the author and may not necessarily represent the views of Balluff Ltd.Please note that the Internet is inherently insecure. It is not appropriate for sensitive material. Please bear this in mind when emailing us. Although we have taken steps to check that this email and any attachments are free from viruses, it is the responsibility of the recipient in keeping with good computing practice to ensure they are actually virus free and Balluff Ltd accepts no responsibility for such viruses. Balluff Ltd. ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders ___ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Danny Kirkwood Technical Sales Assistant Technical Department Balluff Ltd The Automation Centre Finney Lane Cheadle Cheshire SK8 3DF Phone +44 161 2824 706 Fax [EMAIL PROTECTED] Disclaimer Confidentiality Notice This email, together with any attachments, is for the exclusive and confidential use of the person or entity to which it is addressed and may contain confidential