[flashrom] Re: Spansion S25FL127S with 16 MB
What flashrom version are you using? Maybe yours is outdated? Try building it from the source On Wed, Aug 12, 2020 at 10:35 AM ruckzuck--- via flashrom wrote: > > Hallo, > > If i make Flashrom -L i see in the List only listet : > > Spansion S25FL127S-64kB PREW 16384 SPI > Spansion S25FL127S-256kB 16384 SPI > > But not Spansion S25FL127S-128kB for me that lock so that it is not > supported > Need Flashrom a update for the chip ? i think yes. > > best reguards > zuck > > > > > -- > Sicher gesendet mit Tutanota. Hol dir deine eigene verschlüsselte & > werbefreie Mailbox: > https://tutanota.com > > > 7. Juli 2020, 18:38 von ruckz...@tuta.io: > > allo, > > In the End of the Program is written that i send you this: > > > I try to flash the S25FL127S with 16 MB but in the list is it not > > then i try with S25FL127S-256kB and this happen: > > flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -w out.bin -c > S25FL127S-256kB > flashrom on Linux 4.19.118+ (armv6l) > flashrom is free software, get the source code at https://flashrom.org > > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Found Spansion flash chip "S25FL127S-256kB" (16384 kB, SPI) on linux_spi. > === > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom@flashrom.org if any of the above operations > work correctly for you with this flash chip. Please include the flashrom log > file for all operations you tested (see the man page for details), and mention > which mainboard or programmer you tested in the subject line. > Thanks for your help! > Reading old flash chip contents... done. > Erasing and writing flash chip... spi_nbyte_program called for too long a > write > Reading current flash chip contents... done. Looking for another erase > function. > spi_nbyte_program called for too long a write > Reading current flash chip contents... done. Looking for another erase > function. > spi_nbyte_program called for too long a write > Reading current flash chip contents... done. Looking for another erase > function. > Looking for another erase function. > Looking for another erase function. > No usable erase functions left. > FAILED! > Uh oh. Erase/write failed. Checking if anything has changed. > Reading current flash chip contents... done. > Good, writing to the flash chip apparently didn't do anything. > Please check the connections (especially those to write protection pins) > between > the programmer and the flash chip. If you think the error is caused by > flashrom > please report this on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom@flashrom.org, thanks! > > Need Flashrom a update for the chip ? > > best reguards > > zuck > > > > -- > Sicher gesendet mit Tutanota. Hol dir deine eigene verschlüsselte & > werbefreie Mailbox: > https://tutanota.com > > > ___ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
[flashrom] Re: (no subject)
Check your connectivity, if the wires are good enough. Maybe the connection is poor On Mon, Aug 17, 2020 at 10:01 AM Buhrow, Simon wrote: > > Hi, > > > > could you send the whole output? > > Use –VVV and/or –o and post the output here. > > > > Regards, > > Simon > > > > Von: Gjglesias > Gesendet: Donnerstag, 13. August 2020 20:07 > An: flashrom@flashrom.org > Betreff: [flashrom] (no subject) > > > > When i try to flash bios using arduino uno,i get this "Found Generic flash > chip "unknown SPI chip (RDID)" (0 kb,SPI) on serprog. I use windbond w25Q32 > chip. How i fix this? > > ___ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
[flashrom] Re: flashrom mx25l3255e
How long have you waited? Depending on a firmware installed, Bus Pirate may be a little slow: check the Bus Pirate Community Firmware project for the firmware updates. Also, try running this with a higher verbosity, i.e. -VV or -VVV or even more V - that could give you some hints. Also please make sure that your connectivity is good enough On Sun, Aug 16, 2020 at 11:23 PM bmgd...@gmx.de wrote: > > Hi flashrom team, > > i try to read the mx25l3255e > (https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L3255E.pdf) chip. > But it don't work. I have tried to patch flashrom but output say: > > sudo ./flashrom -f -p buspirate_spi:dev=/dev/ttyUSB0,spispeed=115 -V -r > test_mx25l3255e.bin -c MX25L3255E > > flashrom unknown on Linux 5.4.0-42-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > flashrom was built with libpci 3.6.4, GCC 9.3.0, little endian > Command line (8 args): ./flashrom -f -p > buspirate_spi:dev=/dev/ttyUSB0,spispeed=115 -V -r test_mx25l3255e.bin -c > MX25L3255E > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). > Initializing buspirate_spi programmer > Invalid SPI speed, using default. > Detected Bus Pirate hardware 3.5 > Detected Bus Pirate firmware 7.0 > Using SPI command set v2. > SPI speed is 8MHz > Bus Pirate v3 or newer detected. Set serial speed to 2M baud. > Serial speed is 200 baud > Raw bitbang mode version 1 > Raw SPI mode version 1 > The following protocols are supported: SPI. > Probing for Macronix MX25L3255E, 4096 kB: probe_spi_rdid_generic: id1 0xc2, > id2 0x9e16 > Found Macronix flash chip "MX25L3255E" (4096 kB, SPI) on buspirate_spi. > Chip security register: 0x80 > WPSEL is ON > Chip status register is 0x7c. > Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not > set > Chip status register: Bit 6 is set > Chip status register: Block Protect 3 (BP3) is set > Chip status register: Block Protect 2 (BP2) is set > Chip status register: Block Protect 1 (BP1) is set > Chip status register: Block Protect 0 (BP0) is set > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > This chip may contain one-time programmable memory. flashrom cannot read > and may never be able to write it, hence it may not be able to completely > clone the contents of this chip (see man page for details). > === > This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE > The test status of this chip may have been updated in the latest development > version of flashrom. If you are running the latest development version, > please email a report to flashrom@flashrom.org if any of the above operations > work correctly for you with this flash chip. Please include the flashrom log > file for all operations you tested (see the man page for details), and mention > which mainboard or programmer you tested in the subject line. > Thanks for your help! > Some block protection in effect, disabling... Block protection could not be > disabled! > Chip security register: 0x80 > WPSEL is ON > Chip status register is 0x7c. > Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not > set > Chip status register: Bit 6 is set > Chip status register: Block Protect 3 (BP3) is set > Chip status register: Block Protect 2 (BP2) is set > Chip status register: Block Protect 1 (BP1) is set > Chip status register: Block Protect 0 (BP0) is set > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > Reading flash... > > But then nothing happens. Can you help? That would be great! > > > Best regards > > Daniel > > ___ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
[flashrom] Re: Ch341 issues
Check if the connectivity is good enough and provide some logs please. On Sun, Aug 16, 2020 at 11:23 PM Tanka Chin wrote: > > Hi > I'm trying to flash a bios chip W25Q64FV. I have ch341 > The program emptied, and blank but won't write new bios > Can you assist? > > ___ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
