Re: [flexcoders] Re: Unable to get trace to work...
On Thursday 31 August 2006 21:47, Kyle wrote: work in flex 2. Has anyone been able to get trace statements to output to the console window? If so, do you have any pointers? Do you mean the Flex builder window ? No. Do you mean the command line debugger ? Yes. What normally catches me out is not having built a debug version of the SWF (and in the begining not having the special debug player version). -- Tom Chiverton Helping to administratively incentivize mission-critical CEOs This email is sent for and on behalf of Halliwells LLP. Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at St James's Court Brown Street Manchester M2 2JF. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by the Law Society. CONFIDENTIALITY This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 8008. For more information about Halliwells LLP visit www.halliwells.com. -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[flexcoders] Re: Unable to get trace to work...
When I say I am not seeing any trace statements output in the console window I am referring to the console window in Flex Builder 2, and I AM running my application in debug mode.. I just can't figure out why it won't output any trace statements.. Thanks for all the suggestions! -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [flexcoders] Re: Unable to get trace to work...
mm.cfg will output to a file (specified in the cfg file) I normally open a DOS window and just tail flexlog.txt You can get tail command for windows from this resource kit http://www.microsoft.com/downloads/details.aspx?familyid=9d467a69-57ff-4ae7-96ee-b18c4790cffddisplaylang=en Cheers, Stace From: flexcoders@yahoogroups.com [mailto:flexcoders@yahoogroups.com] On Behalf Of Kyle Sent: Thursday, August 31, 2006 4:48 PM To: flexcoders@yahoogroups.com Subject: [flexcoders] Re: Unable to get trace to work... Hi Deepa, I went step by step through the entire process again, as well as trying a few other methods and am still unable to get any tracing to work in flex 2. Has anyone been able to get trace statements to output to the console window? If so, do you have any pointers? Thanks, Kyle AVIS IMPORTANT WARNING Ce message électronique et ses pièces jointes peuvent contenir des renseignements confidentiels, exclusifs ou légalement privilégiés destinés au seul usage du destinataire visé. L'expéditeur original ne renonce à aucun privilège ou à aucun autre droit si le présent message a été transmis involontairement ou s'il est retransmis sans son autorisation. Si vous n'êtes pas le destinataire visé du présent message ou si vous l'avez reçu par erreur, veuillez cesser immédiatement de le lire et le supprimer, ainsi que toutes ses pièces jointes, de votre système. La lecture, la distribution, la copie ou tout autre usage du présent message ou de ses pièces jointes par des personnes autres que le destinataire visé ne sont pas autorisés et pourraient être illégaux. Si vous avez reçu ce courrier électronique par erreur, veuillez en aviser l'expéditeur. This electronic message and its attachments may contain confidential, proprietary or legally privileged information, which is solely for the use of the intended recipient. No privilege or other rights are waived by any unintended transmission or unauthorized retransmission of this message. If you are not the intended recipient of this message, or if you have received it in error, you should immediately stop reading this message and delete it and all attachments from your system. The reading, distribution, copying or other use of this message or its attachments by unintended recipients is unauthorized and may be unlawful. If you have received this e-mail in error, please notify the sender. __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Software development tool Software development Software development services Home design software Software development company YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
RE: [flexcoders] Re: Unable to get trace to work...
This usually happens when the debug build did not complete successfully. Make sure there are no errors in Problems tab before you run in debug mode. Sathish -Original Message- From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kyle Sent: Friday, September 01, 2006 10:16 AM To: flexcoders@yahoogroups.com Subject: [flexcoders] Re: Unable to get trace to work... When I say I am not seeing any trace statements output in the console window I am referring to the console window in Flex Builder 2, and I AM running my application in debug mode.. I just can't figure out why it won't output any trace statements.. Thanks for all the suggestions! -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[flexcoders] Re: Unable to get trace to work...
Thanks Deepa, I have tried following the instructions on setting up my trace debug output; however, I cannot find the file mm.cfg anywhere on my system. From what I have seen in examples, I should simply be able to open the console window and see the trace outputs there when I debug the application; however when I run debug no traces are output to the console. Has anyone run into this issue, or successfully located the mm.cfg file on a window xp system? Thanks! -Kyle -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [flexcoders] Re: Unable to get trace to work...
Hi Kyle Check out the first line in step #2 in the technote: Make sure you have copied the mm.cfg file from your flex_install_dir/bin directory to the client machine's home directory. Alternatively, you can create a file, name it mm.cfg, drop it in your home directory and add the settings specified later in the technote. -deepa From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kyle Sent: Thursday, August 31, 2006 11:34 AM To: flexcoders@yahoogroups.com Subject: [flexcoders] Re: Unable to get trace to work... Thanks Deepa, I have tried following the instructions on setting up my trace debug output; however, I cannot find the file mm.cfg anywhere on my system. >From what I have seen in examples, I should simply be able to open the console window and see the trace outputs there when I debug the application; however when I run debug no traces are output to the console. Has anyone run into this issue, or successfully located the mm.cfg file on a window xp system? Thanks! -Kyle __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Software development tool Software development Software development services Home design software Software development company YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
[flexcoders] Re: Unable to get trace to work...
Hi Deepa, I went step by step through the entire process again, as well as trying a few other methods and am still unable to get any tracing to work in flex 2. Has anyone been able to get trace statements to output to the console window? If so, do you have any pointers? Thanks, Kyle -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [flexcoders] Re: Unable to get trace to work...
Sure, my setup worked from the beginning. But I already was using tracing in 1.5, so my mm.cfg was already set up. Are you sure you have the debug player installed and have configured Flex Builder to use the browser that has the debug player installed? Visit this site to verify your Player version. (start the browser from Flex Builder, paste in the url): http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15507 Tracy From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kyle Sent: Thursday, August 31, 2006 4:48 PM To: flexcoders@yahoogroups.com Subject: [flexcoders] Re: Unable to get trace to work... Hi Deepa, I went step by step through the entire process again, as well as trying a few other methods and am still unable to get any tracing to work in flex 2. Has anyone been able to get trace statements to output to the console window? If so, do you have any pointers? Thanks, Kyle __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Software development tool Software development Software development services Home design software Software development company YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
RE: [flexcoders] Re: Unable to get trace to work...
Make sure you run the SWF in DEBUG in Flex Builder. I press the run button all the time and expect trace statements to work. Tracing only works when you run in debug mode. Ted Patrick Flex Evangelist Adobe Systems Incorporated From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kyle Sent: Thursday, August 31, 2006 1:48 PM To: flexcoders@yahoogroups.com Subject: [flexcoders] Re: Unable to get trace to work... Hi Deepa, I went step by step through the entire process again, as well as trying a few other methods and am still unable to get any tracing to work in flex 2. Has anyone been able to get trace statements to output to the console window? If so, do you have any pointers? Thanks, Kyle __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Software development tool Software development Software development services Home design software Software development company YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
