Re: [Flexradio] VAC issues with Preview 7
Tim: This is useful information. DirectX for audio sucks. I have had mine set to message based since the beginning and just forgot this in my setup note. Bob Tim Ellison wrote: Where did the text go Here is what I wrote: I think I have found a bug. If VAC is configured and you are using Auto enable and then engage DigiU. If you select the var1 or var2 filter, the filter is on the left side (LSB) of the carrier line in pan adapter display mode. The predefined filters work correctly. I have the popping or clicking noise using MIXW and the purchased version of VAC. I was able to reduce the popping (sometimes it is there, sometime not) on PSK31 by setting the audio processing setting in the soundcard setup screen to Message-based (standard) rather than Direct X and setting the VAC buffers to 512. All of the other buffers are 2048 using a Delta 44. CAT in MixW says I am in FSK mode. Setting VAC buffers to a value higher than 512 make things much worse. It works, I just had a bpsk31 QSO with YV5DSL. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison Sent: Friday, November 18, 2005 10:26 PM To: flexRadio@flex-radio.biz Subject: [Flexradio] VAC issues with Preview 7 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz -- Laziness is the number one inspiration for ingenuity. Guilty as charged!
Re: [Flexradio] VAC issues with Preview 7
On Friday, 11/18/2005, Tim Ellison wrote: CAT in MixW says I am in FSK mode. That's due to the CAT code not being current with the updated console controls, the old button legends were RTTY and PSK. However, even when the code is updated, you will not get a correct mode indication in MixW since you are using the Kenwood emulation and the only digital mode choice in the Kenwood MD command set is RTTY. I checked HRD this morning and it shows PSK for DigiU and RTTY for DigiL. The fix for MixW (and all other third party software vendors except HRD) is for them to support the SDR-1000 command set in their code. 73, Bob K5KDN
Re: [Flexradio] VAC issues with Preview 7
Bob, If I am not mistaken, when I select digiU mode, shouldn't the CAT tell MixW to go into USB mode? There are a lot of ASFK modes that are not PSK so forcing digiU to put the digital mode program into PSK is a real restrictive condition. The USB CAT command is supported by MixW because I can select USB in MixW and it puts the SDR1K into USB mode. -Tim --- Integrated Technical Services You can't close the door when the walls cave in --Robert Hunter -Original Message- From: Bob Tracy [mailto:[EMAIL PROTECTED] Sent: Saturday, November 19, 2005 10:05 AM To: Tim Ellison; flexRadio@flex-radio.biz Subject: RE: [Flexradio] VAC issues with Preview 7 On Friday, 11/18/2005, Tim Ellison wrote: CAT in MixW says I am in FSK mode. That's due to the CAT code not being current with the updated console controls, the old button legends were RTTY and PSK. However, even when the code is updated, you will not get a correct mode indication in MixW since you are using the Kenwood emulation and the only digital mode choice in the Kenwood MD command set is RTTY. I checked HRD this morning and it shows PSK for DigiU and RTTY for DigiL. The fix for MixW (and all other third party software vendors except HRD) is for them to support the SDR-1000 command set in their code. 73, Bob K5KDN smime.p7s Description: S/MIME cryptographic signature
Re: [Flexradio] VAC issues with Preview 7
Where did the text go Here is what I wrote: I think I have found a bug. If VAC is configured and you are using Auto enable and then engage DigiU. If you select the var1 or var2 filter, the filter is on the left side (LSB) of the carrier line in pan adapter display mode. The predefined filters work correctly. I have the popping or clicking noise using MIXW and the purchased version of VAC. I was able to reduce the popping (sometimes it is there, sometime not) on PSK31 by setting the audio processing setting in the soundcard setup screen to Message-based (standard) rather than Direct X and setting the VAC buffers to 512. All of the other buffers are 2048 using a Delta 44. CAT in MixW says I am in FSK mode. Setting VAC buffers to a value higher than 512 make things much worse. It works, I just had a bpsk31 QSO with YV5DSL. -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison Sent: Friday, November 18, 2005 10:26 PM To: flexRadio@flex-radio.biz Subject: [Flexradio] VAC issues with Preview 7 ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz smime.p7s Description: S/MIME cryptographic signature
