Re: [Flightgear-devel] render-to-texture XML animation
Martin Spott wrote: Tiago Gusmão wrote: Anyway, my biggest problem right now is that it's eating 10fps in my GF4MX without actually drawing anything. Any tips for increasing performance in render-to-texture? If not, is this performance unacceptable? I think you are actually facing the most obvious problem of the whole idea here: By rendering into a texture you put load on the CPU for doing a job that could be much better done by appropriate OpenGL hardware. You could try to circumvent this problem by shifting the render-to-texture job onto the graphics board, but such a solution would come out to be _very_ hardware-specific, i.e.totally non-portable. Well, we now have a RenderTexture class in SimGear which should take the burden from the developer for making it portable. This class however doesn't support MacOS-X (yet, I contacted someone who has expressed the desire to do so) and the class may fall back to software emulation when no hardware rendering is available. However, most modern and less modern hardware should be able to do it in hardware. Erik -- http://www.ehtw.info (Dutch)Future of Enschede Airport Twente http://www.ehofman.com/fgfs FlightGear Flight Simulator http://www.cafepress.com/fgfs_flightsim FlightGear Art --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] render-to-texture XML animation
Frederic Bouvier wrote: But people using this feature must optimize their drawing just like we did by using display lists. There are numerous way to get a result. Among them, some are faster than others. True, RenderTexture is no magic. It is necessary to optimize it just like it was drawn to the screen. But since it is drawn to a quad of just 256 x 256 pixels at maximum it will always be faster than rendering the same content to the screen. Erik -- http://www.ehtw.info (Dutch)Future of Enschede Airport Twente http://www.ehofman.com/fgfs FlightGear Flight Simulator http://www.cafepress.com/fgfs_flightsim FlightGear Art --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
RE: [Flightgear-devel] Seneca model is still under construction
That could fast become one of my fav twin engined prop AC...on looks alone!! ;-) Looking forward to flying it. Will it have a version compatible with FGv098a? =Dene From: Torsten Dreyer [EMAIL PROTECTED] Reply-To: flightgear-devel@lists.sourceforge.net To: flightgear-devel@lists.sourceforge.net Subject: [Flightgear-devel] Seneca model is still under construction Date: Wed, 15 Feb 2006 19:05:00 +0100 Hi, some of you might remember: I'm working on a Seneca-Model. This is just to show you, that I am still alive. The 3D model: outside view http://www.t3r.de/fg/seneca/fgfs-screen-012.jpg another outside view http://www.t3r.de/fg/seneca/fgfs-screen-011.jpg panel http://www.t3r.de/fg/seneca/fgfs-screen-010.jpg see the pedal's texture? everything here is operative, except the windshield-heater ;-) http://www.t3r.de/fg/seneca/fgfs-screen-013.jpg closeup of the annunciator panel and the gear-transit warning light. http://www.t3r.de/fg/seneca/fgfs-screen-014.jpg closeup of the switch-panel http://www.t3r.de/fg/seneca/fgfs-screen-015.jpg between front-seats: the console for elevator and rudder-trim, fuel selectors and flap lever. Work to do and under construction: - 3d model for King HSI - 3d piper-style dual 50manifold pressure - 3d piper-style RPM - 3d engine-gauges (fuel/oil,CHT,EGT...) - 3d Autopilot Altimatic IIIc - textures for the switch-panel The FDM I use JSBSim with v2.0 config files. The aerodynamics sections were generated using DATCOM+. The results are impressive - the performance values are close to the original airplane. Work to do and under construction: - fine tune the aerodynamics - implement drag coefficients for open cowl-flaps and landing gear - supercharge the engines - get a better propeller, the propC10v I use from the c310 does not seem to produce enough thrust. Still a lot to do before this is usable - I keep you informed... Greetings, Torsten --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel _ Discover fun and games at @ http://xtramsn.co.nz/kids --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Seneca model is still under construction
Looking forward to flying it. Will it have a version compatible with FGv098a? Currently only the CVS version is supporting the JSBSim 2.0 config file format. So the config file has to be backported to the old file format. This is possible, but I will use my time to get it in the air first. Sorry... Torsten --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Seneca model is still under construction
On Wednesday 15 February 2006 20:05, Torsten Dreyer wrote: Hi, some of you might remember: I'm working on a Seneca-Model. This is just to show you, that I am still alive. The 3D model: outside view http://www.t3r.de/fg/seneca/fgfs-screen-012.jpg another outside view http://www.t3r.de/fg/seneca/fgfs-screen-011.jpg panel http://www.t3r.de/fg/seneca/fgfs-screen-010.jpg see the pedal's texture? everything here is operative, except the windshield-heater ;-) http://www.t3r.de/fg/seneca/fgfs-screen-013.jpg closeup of the annunciator panel and the gear-transit warning light. http://www.t3r.de/fg/seneca/fgfs-screen-014.jpg closeup of the switch-panel http://www.t3r.de/fg/seneca/fgfs-screen-015.jpg between front-seats: the console for elevator and rudder-trim, fuel selectors and flap lever. Work to do and under construction: - 3d model for King HSI - 3d piper-style dual 50manifold pressure - 3d piper-style RPM - 3d engine-gauges (fuel/oil,CHT,EGT...) - 3d Autopilot Altimatic IIIc - textures for the switch-panel The FDM I use JSBSim with v2.0 config files. The aerodynamics sections were generated using DATCOM+. The results are impressive - the performance values are close to the original airplane. Work to do and under construction: - fine tune the aerodynamics - implement drag coefficients for open cowl-flaps and landing gear - supercharge the engines - get a better propeller, the propC10v I use from the c310 does not seem to produce enough thrust. Still a lot to do before this is usable - I keep you informed... Greetings, Torsten Looking good! BTW : Anti-aliasing would help a lot when you're making screenshots - you don't need to run with it on all the time if your card can't handle it but for screen grabs frame rates aren't important and it'll make those jagged edges look a lot better. Paul --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Seneca model is still under construction
Torsten Dreyer wrote: some of you might remember: I'm working on a Seneca-Model. This is just to show you, that I am still alive. Wow ! As this seems to become one of the most realistic aircraft in FlightGear the question arises if FlightGear/JSBsim already models carb icing and heating !? Cheers, Martin. -- Unix _IS_ user friendly - it's just selective about who its friends are ! -- --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] [Fwd: LFS And FG news story at Scale]
John Wojnaroski wrote: check out www.techweb.com http://www.techweb.com/ today, Feb. 13, and their home page News Show - jump to Linux Flight Plan for a nice news clip on our SCALE exhibit and the expo. A quick update for those of you who didn't get there in time to see the link. The story can still be found here: http://www.thenewsshow.tv/daily/v3.jhtml?episode=20060213autoplay=true Under the video window you should see a Linux Flight Plan link. Curt. -- Curtis Olsonhttp://www.flightgear.org/~curt HumanFIRST Program http://www.humanfirst.umn.edu/ FlightGear Project http://www.flightgear.org Unique text:2f585eeea02e2c79d7b1d8c4963bae2d --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] socket output problems
Hi Guys im having trouble getting FG to output on a socket using Linux. I know my network is fine as i can telnet to FG and read values etc. but i cant make it output data in native or opengc format. I've tried issuing my i.p my other pc's i.p and localhost etc. Here is my last attempt that failed [EMAIL PROTECTED] ~]# fgfs --opengc=socket,out,30,127.0.0.1,80,tcp Model Author: Unknown Creation Date: 2002-01-01 Version: $Id: c172p.xml,v 1.15 2006-01-12 15:07:14 ehofman Exp $ Description: Cessna C-172 Error: connect() failed in make_client_socket() SG_IO_OUT socket creation failed Error opening channel communication layer. I/O Channel config failed. Segmentation fault Any ideas ??? I can even use the http sever option and its fine. i can output nmea to the serial port i just cant use the network for data output. Oh yes i am using the latest cvs and i have the 2.6.15 kernel. Cheers Justin Smithies --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Re: Flaps/Gear/Load/Speed limits patch
--- Melchior FRANZ wrote: * Buchanan, Stuart -- Wednesday 15 February 2006 00:01: http://www.nanjika.co.uk/flightgear/limits2.tar.gz. It consists of - An improved limits.nas file using property listeners and the new Nasal patch doesn't apply it cleanly. The reject file is quite big. OK, try again on the same link. I ran another cvs update before doing the diff. I've also included the new limits.nas file, if that is easier. -Stuart ___ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
That will fail every time, try something like --opengc=socket,out,30,127.0.0.1,# above 5000,udp tcp is NOT supported for opengc, it is sent and forget udp protocol JW Justin Smithies wrote: Hi Guys im having trouble getting FG to output on a socket using Linux. I know my network is fine as i can telnet to FG and read values etc. but i cant make it output data in native or opengc format. I've tried issuing my i.p my other pc's i.p and localhost etc. Here is my last attempt that failed [EMAIL PROTECTED] ~]# fgfs --opengc=socket,out,30,127.0.0.1,80,tcp Model Author: Unknown Creation Date: 2002-01-01 Version: $Id: c172p.xml,v 1.15 2006-01-12 15:07:14 ehofman Exp $ Description: Cessna C-172 Error: connect() failed in make_client_socket() SG_IO_OUT socket creation failed Error opening channel communication layer. I/O Channel config failed. Segmentation fault Any ideas ??? I can even use the http sever option and its fine. i can output nmea to the serial port i just cant use the network for data output. Oh yes i am using the latest cvs and i have the 2.6.15 kernel. Cheers Justin Smithies --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
In using the loopback address you may also see an error msg since there is no hardware in the loop. Try some other dummy private address other than the loopback 192.xx.xxx.xxx, 10.10.10.; 172.29.0.xxx, etc JW Justin Smithies wrote: Hi Guys im having trouble getting FG to output on a socket using Linux. I know my network is fine das i can telnet to FG and read values etc. but i cant make it output data in native or opengc format. I've tried issuing my i.p my other pc's i.p and localhost etc. Here is my last attempt that failed [EMAIL PROTECTED] ~]# fgfs --opengc=socket,out,30,127.0.0.1,80,tcp Model Author: Unknown Creation Date: 2002-01-01 Version: $Id: c172p.xml,v 1.15 2006-01-12 15:07:14 ehofman Exp $ Description: Cessna C-172 Error: connect() failed in make_client_socket() SG_IO_OUT socket creation failed Error opening channel communication layer. I/O Channel config failed. Segmentation fault Any ideas ??? I can even use the http sever option and its fine. i can output nmea to the serial port i just cant use the network for data output. Oh yes i am using the latest cvs and i have the 2.6.15 kernel. Cheers Justin Smithies --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
Ah sorted im going to have to run the glass cockpit on an other pc i cant use my own i.p. Cheers John On Wednesday 15 February 2006 21:19, John Wojnaroski wrote: In using the loopback address you may also see an error msg since there is no hardware in the loop. Try some other dummy private address other than the loopback 192.xx.xxx.xxx, 10.10.10.; 172.29.0.xxx, etc JW Justin Smithies wrote: Hi Guys im having trouble getting FG to output on a socket using Linux. I know my network is fine das i can telnet to FG and read values etc. but i cant make it output data in native or opengc format. I've tried issuing my i.p my other pc's i.p and localhost etc. Here is my last attempt that failed [EMAIL PROTECTED] ~]# fgfs --opengc=socket,out,30,127.0.0.1,80,tcp Model Author: Unknown Creation Date: 2002-01-01 Version: $Id: c172p.xml,v 1.15 2006-01-12 15:07:14 ehofman Exp $ Description: Cessna C-172 Error: connect() failed in make_client_socket() SG_IO_OUT socket creation failed Error opening channel communication layer. I/O Channel config failed. Segmentation fault Any ideas ??? I can even use the http sever option and its fine. i can output nmea to the serial port i just cant use the network for data output. Oh yes i am using the latest cvs and i have the 2.6.15 kernel. Cheers Justin Smithies --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
Justin Smithies wrote: Ah sorted im going to have to run the glass cockpit on an other pc i cant use my own i.p. There's no reason you can't have FlightGear send udp packets to another application on the same machine. You may or may not want to do that, but it certainly is possible. Curt. -- Curtis Olsonhttp://www.flightgear.org/~curt HumanFIRST Program http://www.humanfirst.umn.edu/ FlightGear Project http://www.flightgear.org Unique text:2f585eeea02e2c79d7b1d8c4963bae2d --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
How Curtis as im trying to run Johns Glass cockpit software demo on the same machine and i cant get FG to send data to it. Ive set his software to use port 6000 and my i.p. 192.168.1.3 it runs up and appears to be awaiting data. Then i run FG with fgfs --opengc=socket,out,30,192.168.1.3,6000,udp And all i get is Error writing data. But if i issue FG with a dummy i.p like 192.168.1.6 no errors, so that just confuses me as you said the error was because it got no reply from the running service. There is nothing on 192.168.1.6 . Anymore ideas ? Justin Smithies On Wednesday 15 February 2006 21:44, Curtis L. Olson wrote: Justin Smithies wrote: Ah sorted im going to have to run the glass cockpit on an other pc i cant use my own i.p. There's no reason you can't have FlightGear send udp packets to another application on the same machine. You may or may not want to do that, but it certainly is possible. Curt. --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
Justin Smithies wrote: How Curtis as im trying to run Johns Glass cockpit software demo on the same machine and i cant get FG to send data to it. Ive set his software to use port 6000 and my i.p. 192.168.1.3 it runs up and appears to be awaiting data. Then i run FG with fgfs --opengc=socket,out,30,192.168.1.3,6000,udp And all i get is Error writing data. But if i issue FG with a dummy i.p like 192.168.1.6 no errors, so that just confuses me as you said the error was because it got no reply from the running service. There is nothing on 192.168.1.6 . Anymore ideas ? I think you lost me on the specific details here, but on many occasions I have sent FlightGear data output to another application on the same machine (and visa versa.) There may be other reasons why it won't work with the open glass cockpit, but there's nothing inherent to Flightgear that would prevent you from sending/receiving network output to/from the same machine (i.e. localhost.) Regards, Curt. -- Curtis Olsonhttp://www.flightgear.org/~curt HumanFIRST Program http://www.humanfirst.umn.edu/ FlightGear Project http://www.flightgear.org Unique text:2f585eeea02e2c79d7b1d8c4963bae2d --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
Just to be sure The machine running the demo software is at 192.168.1.3. What is the address of the FG machine? The startup script for the demo lets you set the socket address where you want to receive data from FG and the IP and socket address where you want to sent control data back to FG. On the FG side, you need to set (as a minimum) the address and socket of the machine running the demo What address/network are you using to handle the other network services? If different than the 192.168.1.0 network you will have to use a second card and set up your routing tables accordingly. At scale4x we had one card configured for connecting to the Internet at eth0 and a second card at eth1 configured to communicate with the sim. For the moment, let's assume one card behind a gateway/firewall that provides NAT for accessing the Internet and a private LAN at 192.168.1.0. In flightgear: --opengc=socket,30,192.168.1.3,6000,udp --native-ctrl=socket,30,IP address of demo machine,receiving socket,udp In the demo startup script --network=6000,FG socket that receives ctrl data,IP address of FG machine Regards John W Justin Smithies wrote: How Curtis as im trying to run Johns Glass cockpit software demo on the same machine and i cant get FG to send data to it. Ive set his software to use port 6000 and my i.p. 192.168.1.3 it runs up and appears to be awaiting data. Then i run FG with fgfs --opengc=socket,out,30,192.168.1.3,6000,udp And all i get is Error writing data. But if i issue FG with a dummy i.p like 192.168.1.6 no errors, so that just confuses me as you said the error was because it got no reply from the running service. There is nothing on 192.168.1.6 . Anymore ideas ? Justin Smithies On Wednesday 15 February 2006 21:44, Curtis L. Olson wrote: Justin Smithies wrote: Ah sorted im going to have to run the glass cockpit on an other pc i cant use my own i.p. There's no reason you can't have FlightGear send udp packets to another application on the same machine. You may or may not want to do that, but it certainly is possible. Curt. --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] 2d panel question
I have a 2d panel question. I want to make an annunciator light for a 2d panel. But, I don't want it to have any of the default panel illumination at night. I want it to be dark when the light is off, and lit when the light is on. But at night, the default panel illumination makes it difficult to see if the light is on or off. Is there a way to do accomplish this with the 2d panels? Thanks, Curt. -- Curtis Olsonhttp://www.flightgear.org/~curt HumanFIRST Program http://www.humanfirst.umn.edu/ FlightGear Project http://www.flightgear.org Unique text:2f585eeea02e2c79d7b1d8c4963bae2d --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
RE: [Flightgear-devel] Seneca model is still under construction
How does the flight model feel when you kill an engine? I remember a couple of years ago that we weren't getting nearly enough drag from a windmilling propeller, either in JSBSim or in YASim, but I don't know how the code is now. David It should be much better in JSBSim, now. Thanks to code contributions from Jiri Javurek for the L410 model (still to be completely ported to FlightGear), we have a much more capable propeller model and a turboprop engine model, as well. Some of the propeller performance depends, of course, on how the config file for that prop is set up. The data that drives the model has to cover the entire range of advance ratio expected to be seen in operation. Jon --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] Mouse patch
I've just checked in a patch to change the mouse behaviour in modes where the 'constrained' property is true (e.g. control mode and view mode). Previously, the 'constrained' property actually caused the mouse to wrap around to the other side of the screen when it hit an edge, causing huge opposite-direction changes in the control and view positions. I may be the only one here who ever tries to fly a plane using the mouse, but I've lost control once too often this way (and it's also unpleasant having the view messed up). The patch constrains the mouse to stay between 25% and 75% on the X and Y axes in the special mouse modes (no effect on pointer mode); when it hits a limit, it simply jumps back to the centre. Now, if you move the mouse continuously to the left in view mode, for example, the view will keep panning to the left, rather than suddenly jumping somewhere unexpected. It still doesn't seem to be working perfectly, but it's better than before. Let me know if anyone objects. When I first did this a few years ago, Norman Vine was adamant that it was the wrong behaviour, for reasons that I no longer remember. All the best, David -- http://www.megginson.com/ --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid3432bid#0486dat1642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] socket output problems
On Wed, 15 Feb 2006 15:35:09 -0600, Curtis wrote in message [EMAIL PROTECTED]: Justin Smithies wrote: John i tried that but did it again anyway with [EMAIL PROTECTED] ~]# fgfs --opengc=socket,out,30,127.0.0.1,6000,udp ..6000 'n up is often used by X Window System networking. You will see error writing data until you start some process that reads data in from that port. If there's nothing waiting on the port to receive the data, the write will fail. This is a non-fatal error, just telling you that it couldn't find anything on the receiving end. Curt. -- ..med vennlig hilsen = with Kind Regards from Arnt... ;o) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
