Re: [Flightgear-devel] Error building FG on Windows (linking)
Hello: I have good news: IT WORKS!!! I did 2 things: 1.- uninstalled everything related with old versions of MSVC and installed again MSVC2010 Express 2.- I don't know why but there is a lack of a variable to register the OSG libraries used from fg code, so I had to include it from MSVC environment at Properties/linker/input/Additional Deppendencies in fgfs, fgpanel and fgviewer projects. AND FINALLY it works. So THANK YOU VERY MUCH to all of you: Alan, Fred and Geoff. Melquiades Carbajo. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
I get my OSG binaries, including the debug versions, from http://openscenegraph.alphapixel.com/osg/downloads/free-openscenegraph-binary-downloads. They maintain VS9, VS10 32 and 64 bit versions (as well as Mac and Linux). Much less hassle than building from source. -Original Message- From: Geoff McLane Sent: Saturday, August 11, 2012 7:20 PM To: flightgear-devel Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) Hi, Just to try it, took the suggested advice - in my build-fg folder... I found I had to click [ Configure ] twice... before I got a clear board... that is no RED lines... this is normal... Looking down the list I can see a LOT of -NOTFOUND, but they are ALL like OSGXX_LIBRARY_DEBUG-NOTFOUND which is to be expected... There are no DEBUG parts to be found. You have to build from source to get those, although I am building up a set of these in - http://downloads.fgx.ch/WIN32 See say openscenegraph-msvc100-dbg-1.zip... and you need all the other '-dbg' items as well... later I will try to put these 'downloads' in better order, and group some of them into a single zips... But in the CMake GUI each of the OSGXX_INCLUDE_DIR and OSGXXX_LIBRARY are all correctly filled in with, in my case - like - C:/FG/16-q/install/msvc100/OpenSceneGraph/lib/osgXXX.lib Now pressing [ Generate ] and it says 'Generating done' Now I close the GUI, and load MSVC10 onto build-fg\flightgear.sln... Switching to 'Release' and loading the fgfs Properties, expanding Linker -> Input -> Additional Dependencies -> Edit I can scan down a big list of libraries ;=)) including all the simgear libraries and the osg libraries, and lots more... [ Cancel ] out of here... Pressing F7, and it all built and linked... without problem... of course, as usual lots, Lots and LOTS of 'warnings'... but ends with Build: 16 succeeded, 0 failed, 0 up-to-date, 3 skipped == Still puzzled why the full command line approach FAILED in your case ;=(( But certainly hope you have more success in the CMake and then MSVC10 GUI approach ;=)) Advise if still problems... HTH, Regards, Geoff. Forwarded Message > From: Geoff McLane > To: FlightGear developers discussions > > Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) > Date: Sat, 11 Aug 2012 19:31:08 +0200 > > Hi Alan, > > What I passed was a full command line build... > no GUI... > > Carbax, what Alan is suggesting here is good... > > In the build-fg folder do - > > build-fg> cmake-gui . (note this dot, '.') > > and the CMake GUI should load... > > Or you can load the cmake GUI from the ICON, and > point it to the source - D:\FG2\flightgear, and > the build - D:\FG2\build-fg... > > This GUI will allow you to click [ Configure ], and > then you can check what it finds regarding the OSG > libraries.. > > You can make sure it finds the OSG libraries BEFORE > doing the [ Generate ] step... > > If [ Generate ] is successful... if not or still > some other problem, advise... > > Now you can load flightgear.sln into MSVC10, switch > to the Release build, and as Alan points out, open the > properties of the fgfs project, and MAKE SURE there are > a big bunch of osg libraries in the Link properties... > > If there are then you can press F7 to build it within > the MSVC10 GUI... and fgfs should build, and link ;=)) > > Make sure you switch to Release... Do not try to build > the Debug since you do not have the Debug components... > > This does NOT answer why the command line usage FAILED, > but should get you to a successful build in the MSVC10 > IDE ;=)) > > Regards, > Geoff. > > On Sat, 2012-08-11 at 18:00 +0100, Alan Teeder wrote: > > Run Cmake again for the flightgear project. > > > > You should see correct (e.g. > > d:\fg2\install\msvc100\OpenSceneGraph\include) > > for all of the OSGxx_INCLUDE_DIR entries, and (e.g. > > d:\fg2\install\msvc100\OpenSceneGraph\lib\osgxx.lib) for each of the > > OSGxx_LIBRARY_DIR entries. > > > > Then do CMAKE Configure and Generate, followed by MSVC build project. > > > > As a check make sure that the OSG libraries are included in the fgfs > > linker > > project command line. (see fgfs properties) > > > > -Original Message- > > From: M. Carbax > > Sent: Saturday, August 11, 2012 5:41 PM > > To: FlightGear developers discussions > > Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) > > > > Hi Fred: > > > > I have the recommended directory structure so is > > d:\fg2\install\msvc100\OpenSceneGraph, and there the three > > subdirectories bin, include and lib. > > &
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi, Just to try it, took the suggested advice - in my build-fg folder... I found I had to click [ Configure ] twice... before I got a clear board... that is no RED lines... this is normal... Looking down the list I can see a LOT of -NOTFOUND, but they are ALL like OSGXX_LIBRARY_DEBUG-NOTFOUND which is to be expected... There are no DEBUG parts to be found. You have to build from source to get those, although I am building up a set of these in - http://downloads.fgx.ch/WIN32 See say openscenegraph-msvc100-dbg-1.zip... and you need all the other '-dbg' items as well... later I will try to put these 'downloads' in better order, and group some of them into a single zips... But in the CMake GUI each of the OSGXX_INCLUDE_DIR and OSGXXX_LIBRARY are all correctly filled in with, in my case - like - C:/FG/16-q/install/msvc100/OpenSceneGraph/lib/osgXXX.lib Now pressing [ Generate ] and it says 'Generating done' Now I close the GUI, and load MSVC10 onto build-fg\flightgear.sln... Switching to 'Release' and loading the fgfs Properties, expanding Linker -> Input -> Additional Dependencies -> Edit I can scan down a big list of libraries ;=)) including all the simgear libraries and the osg libraries, and lots more... [ Cancel ] out of here... Pressing F7, and it all built and linked... without problem... of course, as usual lots, Lots and LOTS of 'warnings'... but ends with Build: 16 succeeded, 0 failed, 0 up-to-date, 3 skipped == Still puzzled why the full command line approach FAILED in your case ;=(( But certainly hope you have more success in the CMake and then MSVC10 GUI approach ;=)) Advise if still problems... HTH, Regards, Geoff. Forwarded Message > From: Geoff McLane > To: FlightGear developers discussions > > Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) > Date: Sat, 11 Aug 2012 19:31:08 +0200 > > Hi Alan, > > What I passed was a full command line build... > no GUI... > > Carbax, what Alan is suggesting here is good... > > In the build-fg folder do - > > build-fg> cmake-gui . (note this dot, '.') > > and the CMake GUI should load... > > Or you can load the cmake GUI from the ICON, and > point it to the source - D:\FG2\flightgear, and > the build - D:\FG2\build-fg... > > This GUI will allow you to click [ Configure ], and > then you can check what it finds regarding the OSG > libraries.. > > You can make sure it finds the OSG libraries BEFORE > doing the [ Generate ] step... > > If [ Generate ] is successful... if not or still > some other problem, advise... > > Now you can load flightgear.sln into MSVC10, switch > to the Release build, and as Alan points out, open the > properties of the fgfs project, and MAKE SURE there are > a big bunch of osg libraries in the Link properties... > > If there are then you can press F7 to build it within > the MSVC10 GUI... and fgfs should build, and link ;=)) > > Make sure you switch to Release... Do not try to build > the Debug since you do not have the Debug components... > > This does NOT answer why the command line usage FAILED, > but should get you to a successful build in the MSVC10 > IDE ;=)) > > Regards, > Geoff. > > On Sat, 2012-08-11 at 18:00 +0100, Alan Teeder wrote: > > Run Cmake again for the flightgear project. > > > > You should see correct (e.g. d:\fg2\install\msvc100\OpenSceneGraph\include) > > for all of the OSGxx_INCLUDE_DIR entries, and (e.g. > > d:\fg2\install\msvc100\OpenSceneGraph\lib\osgxx.lib) for each of the > > OSGxx_LIBRARY_DIR entries. > > > > Then do CMAKE Configure and Generate, followed by MSVC build project. > > > > As a check make sure that the OSG libraries are included in the fgfs linker > > project command line. (see fgfs properties) > > > > -Original Message- > > From: M. Carbax > > Sent: Saturday, August 11, 2012 5:41 PM > > To: FlightGear developers discussions > > Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) > > > > Hi Fred: > > > > I have the recommended directory structure so is > > d:\fg2\install\msvc100\OpenSceneGraph, and there the three > > subdirectories bin, include and lib. > > > > > > Thanks, > -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Alan, What I passed was a full command line build... no GUI... Carbax, what Alan is suggesting here is good... In the build-fg folder do - build-fg> cmake-gui . (note this dot, '.') and the CMake GUI should load... Or you can load the cmake GUI from the ICON, and point it to the source - D:\FG2\flightgear, and the build - D:\FG2\build-fg... This GUI will allow you to click [ Configure ], and then you can check what it finds regarding the OSG libraries.. You can make sure it finds the OSG libraries BEFORE doing the [ Generate ] step... If [ Generate ] is successful... if not or still some other problem, advise... Now you can load flightgear.sln into MSVC10, switch to the Release build, and as Alan points out, open the properties of the fgfs project, and MAKE SURE there are a big bunch of osg libraries in the Link properties... If there are then you can press F7 to build it within the MSVC10 GUI... and fgfs should build, and link ;=)) Make sure you switch to Release... Do not try to build the Debug since you do not have the Debug components... This does NOT answer why the command line usage FAILED, but should get you to a successful build in the MSVC10 IDE ;=)) Regards, Geoff. On Sat, 2012-08-11 at 18:00 +0100, Alan Teeder wrote: > Run Cmake again for the flightgear project. > > You should see correct (e.g. d:\fg2\install\msvc100\OpenSceneGraph\include) > for all of the OSGxx_INCLUDE_DIR entries, and (e.g. > d:\fg2\install\msvc100\OpenSceneGraph\lib\osgxx.lib) for each of the > OSGxx_LIBRARY_DIR entries. > > Then do CMAKE Configure and Generate, followed by MSVC build project. > > As a check make sure that the OSG libraries are included in the fgfs linker > project command line. (see fgfs properties) > > -Original Message- > From: M. Carbax > Sent: Saturday, August 11, 2012 5:41 PM > To: FlightGear developers discussions > Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) > > Hi Fred: > > I have the recommended directory structure so is > d:\fg2\install\msvc100\OpenSceneGraph, and there the three > subdirectories bin, include and lib. > > > Thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Carbax, Sorry for using your family name, but do not know your first name ;=)) As Fred points out there is something quite strange here concerning OSG libraries... they did NOT get added to the link!!! And yes there is a BIG clue in your bldlog-1.txt... I have put my equivalent last bldlog-1.txt at :- http://geoffair.org/tmp/bldlog-1.txt Compare the difference commencing at about line 27-28 through to about line 40 only... In my case after cmake finds ALUT, it then finds osgText, osgSim, etc... down to 'Found OpenSceneGraph: followed by a big list of OSG libraries... Your bldlog-1.txt does NOT show these lines... Why? WHY?? I checked again and the zip I put on my site DOES definitively include - install\msvc100\OpenSceneGraph\lib\OpenThreads.lib \osg.lib \osgAnimation.lib etc, etc, etc... which, again as Fred points out, I got some time ago from the jenkins build... And as per about the 5th line of your bldlog-1.txt which says - Set ENVIRONMENT OSG_DIR=D:\FG2\install\msvc100\openscenegraph you should be able to confirm this by doing a > dir D:\FG2\install\msvc100\openscenegraph\lib and reporting the list found... So we come back to the question WHY did cmake NOT find these in your case??? Has the jenkins version changed. The last archive I got was April/May! I would have updated to a later but the day I did that simpits was down... and still seems down for getting say OSG-stable... But cmake must have found the OSG includes otherwise there would be hundreds of compiler errors about NOT finding osg include files... The errors are ONLY in the link, and as stated that is because the OSG libraries, which I assume are all there, simply did NOT get added by cmake to the fgfs link line... I am perplexed! I do not know why cmake skipped these important osg library finds... and did not abort if it failed to find them... Does anyone else have a clue ;=(( Do not give up! There must be some 'simple' explanation here ;=)) Regards, Geoff. On Sat, 2012-08-11 at 17:59 +0200, Frederic Bouvier wrote: > Where is OSG 3 ? It's a required dependency. You can download it from Jenkins > if you don't want to build it yourself > > -Fred > > - Mail original - > > De: "M. Carbax" > > À: "FlightGear developers discussions" > > > > Envoyé: Samedi 11 Août 2012 17:52:45 > > Objet: Re: [Flightgear-devel] Error building FG on Windows (linking) > > > > Hi Geoff: > > > > > > First at all, thanks for your support and your insterest helping and > > encouraging me. > > > > Second: there is no way, I did follow the instructions you send me, > > sg > > with no problems, but fg doesn't work with the same error that always > > (I have to say that I use the MSVC 2010 Express). > > > > Nevertheless, please find enclosed the log file just in case you can > > see a clue . > > > > (https://www.dropbox.com/s/j6p2qka867gn03o/bldlog-1.txt) > > > > Many thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Run Cmake again for the flightgear project. You should see correct (e.g. d:\fg2\install\msvc100\OpenSceneGraph\include) for all of the OSGxx_INCLUDE_DIR entries, and (e.g. d:\fg2\install\msvc100\OpenSceneGraph\lib\osgxx.lib) for each of the OSGxx_LIBRARY_DIR entries. Then do CMAKE Configure and Generate, followed by MSVC build project. As a check make sure that the OSG libraries are included in the fgfs linker project command line. (see fgfs properties) -Original Message- From: M. Carbax Sent: Saturday, August 11, 2012 5:41 PM To: FlightGear developers discussions Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) Hi Fred: I have the recommended directory structure so is d:\fg2\install\msvc100\OpenSceneGraph, and there the three subdirectories bin, include and lib. Thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
So You have to discover why osg is not in the link command. -Fred - Mail original - > De: "M. Carbax" > À: "FlightGear developers discussions" > > Envoyé: Samedi 11 Août 2012 18:41:42 > Objet: Re: [Flightgear-devel] Error building FG on Windows (linking) > > Hi Fred: > > I have the recommended directory structure so is > d:\fg2\install\msvc100\OpenSceneGraph, and there the three > subdirectories bin, include and lib. -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Fred: I have the recommended directory structure so is d:\fg2\install\msvc100\OpenSceneGraph, and there the three subdirectories bin, include and lib. Thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Where is OSG 3 ? It's a required dependency. You can download it from Jenkins if you don't want to build it yourself -Fred - Mail original - > De: "M. Carbax" > À: "FlightGear developers discussions" > > Envoyé: Samedi 11 Août 2012 17:52:45 > Objet: Re: [Flightgear-devel] Error building FG on Windows (linking) > > Hi Geoff: > > > First at all, thanks for your support and your insterest helping and > encouraging me. > > Second: there is no way, I did follow the instructions you send me, > sg > with no problems, but fg doesn't work with the same error that always > (I have to say that I use the MSVC 2010 Express). > > Nevertheless, please find enclosed the log file just in case you can > see a clue . > > (https://www.dropbox.com/s/j6p2qka867gn03o/bldlog-1.txt) > > Many thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Geoff: First at all, thanks for your support and your insterest helping and encouraging me. Second: there is no way, I did follow the instructions you send me, sg with no problems, but fg doesn't work with the same error that always (I have to say that I use the MSVC 2010 Express). Nevertheless, please find enclosed the log file just in case you can see a clue . (https://www.dropbox.com/s/j6p2qka867gn03o/bldlog-1.txt) Many thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
On Thu, 9 Aug 2012, Geoff McLane wrote: > I AGREE the directory setup SUCKS big time, and the wiki > does not yet give ALL the answers... and this, at the moment > seem exacerbated by some Win32 parts of jenkins > (simpits) seem DOWN... > Should be back online tonight! :) g. -- Proud owner of F-15C 80-0007 http://www.f15sim.com - The only one of its kind. http://www.diy-cockpits.org/coll - Go Collimated or Go Home. Some people collect things for a hobby. Geeks collect hobbies. ScarletDME - The red hot Data Management Environment A Multi-Value database for the masses, not the classes. http://www.scarletdme.org - Get it _today_! Buying desktop hardware and installing a server OS doesn't make a server-class system any more than sitting in a puddle makes you a duck. [Cipher in a.s.r] -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi, I can not leave this thread like this ;=(( I have NOT followed what your PARTICULAR problem is, but decided to do a 'quick' 2.9 build from source, using existing binaries, and found NO PROBLEMS... total build time approximately 3-4 hours... I AGREE the directory setup SUCKS big time, and the wiki does not yet give ALL the answers... and this, at the moment seem exacerbated by some Win32 parts of jenkins (simpits) seem DOWN... But in essence, following the wiki I built SG/FG in just some hours... was broken by a birthday lunch for my wife! ;=)) To try to make your life very SIMPLE I have uploaded a complete single build zip as - http://geoffair.org/tmp/fgfs-build-01.zip Be aware it is 48 MB... but contains EVERYTHING needed... It only requires you do the simgear, flightgear and fgdata clones, and RUN the build ONLY in the MSVC10 command prompt... All Programs -> Microsoft Visual Studio 2010 -> Visual Studio Tools -> Visual Studio Command Prompt (2010) If you unzip this into some folder, preferably without spaces, it sets up a LOT of things, and then when in that folder in a MSVC10 prompt do :- It contains a README.msvc100.txt, but in essence it is - updsg.bat # clone the SG source cd build-sg build-sg.bat # build/install the SG libraries cd .. updfg.bat # clone the flightgear source cd build-fg build-fg.bat # build/install FG cd .. run-fg.bat# and FLY FREE ;=)) OR, if you feel LUCKY, just run build-all.bat... All assumes you have git setup to run from a command prompt... But I did NOT put much error checking in that bat... in my quite fast machine, I unzipped it into a new temp2 folder, and ran build-all... this took just <1 hour, and I was FLYING ;=)) with the world's BEST flight simulator... You have to watch it, and add the enter key twice... If you use this, and you have an error, send the relevant bldlog-1.txt file for inspection... AFTER you have checked it, and corrected any obvious problems ;=)) Of course, BEFORE the LAST step you need to DOWNLOAD fgdata to somewhere - https://gitorious.org/fg/fgdata It is BIG and HEAVY - 58 thousand files, 12 GB - takes HOURS even on my relative FAST internet connection... And adjust run-fg.bat to that folder. In my case that is C:\FG\fgdata But the run-fg.bat can be adjusted to anywhere... AND it further ASSUMES OpenAL (sound library) has been install system wide... Download and install say "Setup FlightGear 2.8.0-RC4.exe", http://www.flightgear.org/download/ down near the bottom [Mirror 1] [Mirror 2] [Mirror 3] and during the install check install OpenAL if you have NOT done this before... You can also do this from the OpenAL site, downloading, and install their SDK, and alut... leave you to work out the details... Now, you might have chosen to GIVE UP ;=(( That is for sure your choice... the easy way out ;=)) Building SG/FG from source can certainly be quite FRUSTRATING in Windows ;=(( But this shows SG/FG can be easily built using MSVC10... albeit, with some messing with the binary downloads, and ensuring OpenAL is installed... Hope you will NOT 'give up', and take another little look... Enjoy ;=)) Regards, Geoff. On Wed, 2012-08-08 at 20:32 +0200, M. Carbax wrote: > No way. > > I brougth from http://flightgear.simpits.org:8080/ everything but FG > source, so I put the source(2.9.0) into thedirectory structure to > build with Cmake and MSVC10 and NO way, same errors. > > > Thanks folks for your support, I give up. > > 2012/8/8 M. Carbax : > > Thanks Fred, I'll try my last chance :( > -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
No way. I brougth from http://flightgear.simpits.org:8080/ everything but FG source, so I put the source(2.9.0) into thedirectory structure to build with Cmake and MSVC10 and NO way, same errors. Thanks folks for your support, I give up. 2012/8/8 M. Carbax : > Thanks Fred, I'll try my last chance :( -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Thanks Fred, I'll try my last chance :( -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
It may be an OSG library error. If you already have OSG installed on your computer Cmake may be detecting this instead of the one that you think that you are using if you are following the instructions at http://wiki.flightgear.org/Building_using_CMake_-_Windows. Look at the Cmake screen after pressing "configure". Have you tried the pre-built binaries at http://www.flightgear.org/download/main-program/ and http://wiki.flightgear.org/FlightGear_Build_Server? When you come to run the program also be aware that fgdata version has to match the flightgear version., and downloading fgdata takes a long long long time. (My Git copy of fgdata is 15Gb at the moment!) Best of luck. -Original Message- From: M. Carbax Sent: Wednesday, August 08, 2012 4:17 PM To: FlightGear developers discussions Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) Thanks Frederic: I tryed before 2.8.0 and 2.6.0, and the problem is the same: smething realted with simgear lib and unresolved external symbols. I don't know what I'm doing wrong, thanks, 2012/8/8 Frederic Bouvier : >> >> Hi Alan: >> >> Once more, thanks for trying to help, but there is no way: I tried SG >> $ FG 2.9.0, I followed the document, but the errors still appear: I >> give up :( >> >> I think that 10 days is enough. > > You have 2.8.0 rc4 if you can't wait > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
I mean: 2.8.0 rc4 *binaries* are out. I doubt that you manage to compile from sources 2.8 if you can't for 2.9 Regards, -Fred - Mail original - > De: "M. Carbax" > À: "FlightGear developers discussions" > > Envoyé: Mercredi 8 Août 2012 17:17:26 > Objet: Re: [Flightgear-devel] Error building FG on Windows (linking) > > Thanks Frederic: > > I tryed before 2.8.0 and 2.6.0, and the problem is the same: smething > realted with simgear lib and unresolved external symbols. > > > I don't know what I'm doing wrong, thanks, > > > 2012/8/8 Frederic Bouvier : > >> > >> Hi Alan: > >> > >> Once more, thanks for trying to help, but there is no way: I tried > >> SG > >> $ FG 2.9.0, I followed the document, but the errors still appear: > >> I > >> give up :( > >> > >> I think that 10 days is enough. > > > > You have 2.8.0 rc4 if you can't wait > > > > -- > > Live Security Virtual Conference > > Exclusive live event will cover all the ways today's security and > > threat landscape has changed and how IT managers can respond. > > Discussions > > will include endpoint security, mobile security and the latest in > > malware > > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > > ___ > > Flightgear-devel mailing list > > Flightgear-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. > Discussions > will include endpoint security, mobile security and the latest in > malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Thanks Frederic: I tryed before 2.8.0 and 2.6.0, and the problem is the same: smething realted with simgear lib and unresolved external symbols. I don't know what I'm doing wrong, thanks, 2012/8/8 Frederic Bouvier : >> >> Hi Alan: >> >> Once more, thanks for trying to help, but there is no way: I tried SG >> $ FG 2.9.0, I followed the document, but the errors still appear: I >> give up :( >> >> I think that 10 days is enough. > > You have 2.8.0 rc4 if you can't wait > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
> > Hi Alan: > > Once more, thanks for trying to help, but there is no way: I tried SG > $ FG 2.9.0, I followed the document, but the errors still appear: I > give up :( > > I think that 10 days is enough. You have 2.8.0 rc4 if you can't wait -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Alan: Once more, thanks for trying to help, but there is no way: I tried SG $ FG 2.9.0, I followed the document, but the errors still appear: I give up :( I think that 10 days is enough. Thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Follow the instructions at http://wiki.flightgear.org/Building_using_CMake_-_Windows. Build Simgear first, then Flightgear. It is important to have the same version of both simgear and flightgear. Most folk on this list are probably building version 2.8.0 or 2.9. 0 at the moment. 2.8 is about to be released. 2.9 is in development. These are available on git. -Original Message- From: M. Carbax Sent: Tuesday, August 07, 2012 8:40 PM To: FlightGear developers discussions Subject: Re: [Flightgear-devel] Error building FG on Windows (linking) Hi Alan: Thanks for your help: Do you mean compile simgear with MSYS (for instance) and then flightgear with MSVC10? 2012/8/7 Alan Teeder : > Try a cmake of simgear from outside of MSVC, followed by a clean + build > of > simgear. That fixed it for me last week. > > -Original Message- > From: M. Carbax > Sent: Tuesday, August 07, 2012 7:56 PM > To: flightgear-devel@lists.sourceforge.net > Subject: [Flightgear-devel] Error building FG on Windows (linking) > > Hello: > > Probably is already solved and documented but I couldn't find the > solution for a week, > > The problem is: > > > 27>sgenvironment.lib(precipitation.obj) : error LNK2019: unresolved > external symbol "__declspec(dllimport) public: void __thiscall > osgParticle::PrecipitationEffect::setCellSize(class osg::Vec3f const > &)" > (__imp_?setCellSize@PrecipitationEffect@osgParticle@@QAEXABVVec3f@osg@@@Z) > referenced in function "public: bool __thiscall > SGPrecipitation::update(void)" (?update@SGPrecipitation@@QAE_NXZ) > > 27>D:\fg2\projects\msvc100\FlightGear\src\Main\Release\fgfs.exe : > fatal error LNK1120: 1707 unresolved externals > > > > When I try to build under MSVC 10 Express OSG 3.0.1 and FG and SG 2.6.0 > > > > Someone could tell em where can I find how to solve it? > > > Many thanks, > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Hi Alan: Thanks for your help: Do you mean compile simgear with MSYS (for instance) and then flightgear with MSVC10? 2012/8/7 Alan Teeder : > Try a cmake of simgear from outside of MSVC, followed by a clean + build of > simgear. That fixed it for me last week. > > -Original Message- > From: M. Carbax > Sent: Tuesday, August 07, 2012 7:56 PM > To: flightgear-devel@lists.sourceforge.net > Subject: [Flightgear-devel] Error building FG on Windows (linking) > > Hello: > > Probably is already solved and documented but I couldn't find the > solution for a week, > > The problem is: > > > 27>sgenvironment.lib(precipitation.obj) : error LNK2019: unresolved > external symbol "__declspec(dllimport) public: void __thiscall > osgParticle::PrecipitationEffect::setCellSize(class osg::Vec3f const > &)" > (__imp_?setCellSize@PrecipitationEffect@osgParticle@@QAEXABVVec3f@osg@@@Z) > referenced in function "public: bool __thiscall > SGPrecipitation::update(void)" (?update@SGPrecipitation@@QAE_NXZ) > > 27>D:\fg2\projects\msvc100\FlightGear\src\Main\Release\fgfs.exe : > fatal error LNK1120: 1707 unresolved externals > > > > When I try to build under MSVC 10 Express OSG 3.0.1 and FG and SG 2.6.0 > > > > Someone could tell em where can I find how to solve it? > > > Many thanks, > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > > -- > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG on Windows (linking)
Try a cmake of simgear from outside of MSVC, followed by a clean + build of simgear. That fixed it for me last week. -Original Message- From: M. Carbax Sent: Tuesday, August 07, 2012 7:56 PM To: flightgear-devel@lists.sourceforge.net Subject: [Flightgear-devel] Error building FG on Windows (linking) Hello: Probably is already solved and documented but I couldn't find the solution for a week, The problem is: 27>sgenvironment.lib(precipitation.obj) : error LNK2019: unresolved external symbol "__declspec(dllimport) public: void __thiscall osgParticle::PrecipitationEffect::setCellSize(class osg::Vec3f const &)" (__imp_?setCellSize@PrecipitationEffect@osgParticle@@QAEXABVVec3f@osg@@@Z) referenced in function "public: bool __thiscall SGPrecipitation::update(void)" (?update@SGPrecipitation@@QAE_NXZ) 27>D:\fg2\projects\msvc100\FlightGear\src\Main\Release\fgfs.exe : fatal error LNK1120: 1707 unresolved externals When I try to build under MSVC 10 Express OSG 3.0.1 and FG and SG 2.6.0 Someone could tell em where can I find how to solve it? Many thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] Error building FG on Windows (linking)
Hello: Probably is already solved and documented but I couldn't find the solution for a week, The problem is: 27>sgenvironment.lib(precipitation.obj) : error LNK2019: unresolved external symbol "__declspec(dllimport) public: void __thiscall osgParticle::PrecipitationEffect::setCellSize(class osg::Vec3f const &)" (__imp_?setCellSize@PrecipitationEffect@osgParticle@@QAEXABVVec3f@osg@@@Z) referenced in function "public: bool __thiscall SGPrecipitation::update(void)" (?update@SGPrecipitation@@QAE_NXZ) 27>D:\fg2\projects\msvc100\FlightGear\src\Main\Release\fgfs.exe : fatal error LNK1120: 1707 unresolved externals When I try to build under MSVC 10 Express OSG 3.0.1 and FG and SG 2.6.0 Someone could tell em where can I find how to solve it? Many thanks, -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
hi, you can find them on my own website: http://seb.marque.free.fr/fichiers/flightgear/osg.patch and http://seb.marque.free.fr/fichiers/flightgear/osg2.patch, I compiled succesfully yesterday with them, they come from the devel-list too. best regards seb Roy Vegard Ovesen a écrit : > On Thursday 05 April 2007 21:02, Alex Romosan wrote: >> there are two patches i posted. you need to apply both. >> >> --alex-- > > I'm sorry, I can not extract the patches from the mailing list archives on > Sourceforge. Can you please repost them here on the devel-list? > > - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
On Thursday 05 April 2007 21:02, Alex Romosan wrote: > there are two patches i posted. you need to apply both. > > --alex-- I'm sorry, I can not extract the patches from the mailing list archives on Sourceforge. Can you please repost them here on the devel-list? -- Roy Vegard Ovesen - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
Roy Vegard Ovesen writes: > I tried the patch from the users list first, but while it got past > model_panel.cxx I gor similar errors on Main/renderer.cxx. there are two patches i posted. you need to apply both. --alex-- -- | I believe the moment is at hand when, by a paranoiac and active | | advance of the mind, it will be possible (simultaneously with | | automatism and other passive states) to systematize confusion | | and thus to help to discredit completely the world of reality. | - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
On Thursday 05 April 2007 01:40, Gabor Toth wrote: > Hi, > > I've got the hint on the IRC channel from Jester to use OSG revision 6398 > to avoid this error. It worked for me. > > Regards, > Gabor Thanks! That worked fine. I tried the patch from the users list first, but while it got past model_panel.cxx I gor similar errors on Main/renderer.cxx. -- Roy Vegard Ovesen - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
On 4/5/07, Gabor Toth <[EMAIL PROTECTED]> wrote: > Hi, > > I've got the hint on the IRC channel from Jester to use OSG revision 6398 to > avoid this error. It worked for me. Or use the patch from the users mailing list available in this thread: http://sourceforge.net/mailarchive/forum.php?thread_name=460C6BD9.7040001%40charter.net&forum_name=flightgear-users I have not tested that, though. Greets, Csaba/Jester - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Error building FG
Hi, I've got the hint on the IRC channel from Jester to use OSG revision 6398 to avoid this error. It worked for me. Regards, Gabor On Wednesday 04 April 2007 07:58, Roy Vegard Ovesen wrote: > Hi > > I get this error when bulding Flightgear: > > > Making all in Model > make[2]: Entering directory > `/home/royvegard/src/FlightGear/source/src/Model' if > g++ -DHAVE_CONFIG_H -I. -I. -I../../src/Include -I../.. -I../../src > -I/usr/X11R6/include -I/usr/local/include -g -O2 -D_REENTRANT -MT > model_panel.o -MD -MP -MF ".deps/model_panel.Tpo" \ > -c -o model_panel.o `test -f 'model_panel.cxx' || > echo './'`model_panel.cxx; \ > then mv -f ".deps/model_panel.Tpo" ".deps/model_panel.Po"; \ > else rm -f ".deps/model_panel.Tpo"; exit 1; \ > fi > model_panel.cxx: In function 'osg::Node* load_panel(SGPropertyNode*)': > model_panel.cxx:28: error: cannot allocate an object of abstract > type 'FGPanelNode' > panelnode.hxx:23: note: because the following virtual functions are pure > within 'FGPanelNode': > /usr/local/include/osg/Drawable:425: note: virtual void > osg::Drawable::drawImplementation(osg::RenderInfo&) const > make[2]: *** [model_panel.o] Error 1 > make[2]: Leaving directory > `/home/royvegard/src/FlightGear/source/src/Model' make[1]: *** > [all-recursive] Error 1 > make[1]: Leaving directory `/home/royvegard/src/FlightGear/source/src' > make: *** [all-recursive] Error 1 > > > I'm on Gentoo. OSG and friends are from CVS/SVN. Flightgear and Simgear are > from CVS. The rest of the dependencies are from Portage (Gentoo packages). - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] Error building FG
Hi I get this error when bulding Flightgear: Making all in Model make[2]: Entering directory `/home/royvegard/src/FlightGear/source/src/Model' if g++ -DHAVE_CONFIG_H -I. -I. -I../../src/Include -I../.. -I../../src -I/usr/X11R6/include -I/usr/local/include -g -O2 -D_REENTRANT -MT model_panel.o -MD -MP -MF ".deps/model_panel.Tpo" \ -c -o model_panel.o `test -f 'model_panel.cxx' || echo './'`model_panel.cxx; \ then mv -f ".deps/model_panel.Tpo" ".deps/model_panel.Po"; \ else rm -f ".deps/model_panel.Tpo"; exit 1; \ fi model_panel.cxx: In function 'osg::Node* load_panel(SGPropertyNode*)': model_panel.cxx:28: error: cannot allocate an object of abstract type 'FGPanelNode' panelnode.hxx:23: note: because the following virtual functions are pure within 'FGPanelNode': /usr/local/include/osg/Drawable:425: note: virtual void osg::Drawable::drawImplementation(osg::RenderInfo&) const make[2]: *** [model_panel.o] Error 1 make[2]: Leaving directory `/home/royvegard/src/FlightGear/source/src/Model' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/royvegard/src/FlightGear/source/src' make: *** [all-recursive] Error 1 I'm on Gentoo. OSG and friends are from CVS/SVN. Flightgear and Simgear are from CVS. The rest of the dependencies are from Portage (Gentoo packages). -- Roy Vegard Ovesen - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel