EMM/EKS lamps are all over ebay quite cheap compared to other AV lamps.
As for splices you might try redoing any that are causing problems. Use a good
splicer--it is nearly impossible to get the tape and sprocket holes aligned
perfectly by hand. With 16mm you can usually get by with splicing tape on the
base side only, but others would say it is better to tape both sides.
Ed
-Original Message-
>From: Floris Vanhoof <2206...@gmail.com>
>Sent: Feb 16, 2016 2:37 PM
>To: frameworks@jonasmekasfilms.com
>Subject: [Frameworks] projector skips and new lamps for old projectors
>
>Dear,
>
>When I project my 16 films on my Bell & Howell TQ3 projector , sometimes, with
>starting the projector or when a splice passes the gate, the image starts to
>skip (or "jump").
>Does anyone know this phenomenon and what to do about it?
>Often, during projection, I'm on the other side of the room, playing the live
>soundtrack, so avoiding skips is a must.
>
>
>Also:
>What would be the least expensive source for EMM 24V 250W lamps?
>I'm in Europe, though cheap lamps can come from everywhere.
>
>And are there (cooler, brighter) LED alternatives for these lamps?
>EMM 24V 250W
>ELC 24V 250W
>EHJ 24V 250W
>Or more in general: is anyone installing LED in old projectors already?
>I've got no experience with bright LED's and LED drivers, but it sounds like
>the future to me!
>
>
>See you next weeks in:
>Cable festival, Nantes http://www.cablenantes.org/site/
>Mire, Nantes http://www.mire-exp.org/
>In L'Etna, Paris https://www.facebook.com/events/463830307140505/
>At Kraak festival, Brussels http://kraak.net/festival2016/
>
>Best, Floris
>___
>FrameWorks mailing list
>FrameWorks@jonasmekasfilms.com
>https://mailman-mail5.webfaction.com/listinfo/frameworks
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks
