Re: EISA Adaptec 274X SCSI panic (ISRng related)
On Tue, 18 Nov 2003, Nate Lawson wrote:
> On Tue, 18 Nov 2003, Andy Farkas wrote:
> > My EISA AHA2740's don't work no more :(
> >
> > # grep ahc /var/run/dmesg.boot
> > ahc0: at 0x2c00-0x2cff, irq 10 (level)
> > ahc0: on eisa0 slot 2
> > ahc1: at 0x4c00-0x4cff, irq 11 (level)
> > ahc1: on eisa0 slot 4
> > ahc2: port 0xf800-0xf8ff mem
> > 0xf68fb000-0xf68fbfff irq 17 at device 11.0 on pci1
> > ahc2: Using left over BIOS settings
> > ahc3: port 0xf400-0xf4ff mem
> > 0xf68fa000-0xf68fafff irq 18 at device 12.0 on pci1
> > ahc3: Using left over BIOS settings
> >
> > Fatal trap 12: page fault while in kernel mode
> > cpuid = 0; apic id = 00
> > fault virtual address = 0x0
> > fault code = supervisor write, page not present
> > instruction pointer = 0x8:0xc0649083
> > stack pointer = 0x10:0xd763ac5c
> > frame pointer = 0x10:0xd763ac84
> > code segment= base 0x0, limit 0xf, type 0x1b
> > = DPL 0, pres 1, def32 1, gran 1
> > processor eflags= resume, IOPL = 0
> > current process = 14 (idle: cpu0)
> > kernel: type 12 trap, code=0
> > Stopped at intr_execute_handlers+0x23: lock addl %eax,0(%edx)
> > db> tr
> > intr_execute_handlers(c06d5084,d763ac9c,d763ace0,c065bbae,7) at
> > intr_execute_handlers+0x23
> > atpic_handle_intr(7) at atpic_handle_intr+0x42
> > Xatpic_intr7() at Xatpic_intr7+0x1e
> > --- interrupt, eip = 0xc064d655, esp = 0xd763ace0, ebp = 0xd763ace0 ---
>
> This is almost certainly addressed by jhb's atpic patch.
>
> -Nate
With a kernel built yesterday, they are working again.
Awsome work guys.
Go the Wallabies
--
:{ [EMAIL PROTECTED]
Andy Farkas
System Administrator
Speednet Communications
http://www.speednet.com.au/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: EISA Adaptec 274X SCSI panic (ISRng related)
On Tue, 18 Nov 2003, Andy Farkas wrote: > My EISA AHA2740's don't work no more :( > > # grep ahc /var/run/dmesg.boot > ahc0: at 0x2c00-0x2cff, irq 10 (level) > ahc0: on eisa0 slot 2 > ahc1: at 0x4c00-0x4cff, irq 11 (level) > ahc1: on eisa0 slot 4 > ahc2: port 0xf800-0xf8ff mem > 0xf68fb000-0xf68fbfff irq 17 at device 11.0 on pci1 > ahc2: Using left over BIOS settings > ahc3: port 0xf400-0xf4ff mem > 0xf68fa000-0xf68fafff irq 18 at device 12.0 on pci1 > ahc3: Using left over BIOS settings > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0x0 > fault code= supervisor write, page not present > instruction pointer = 0x8:0xc0649083 > stack pointer = 0x10:0xd763ac5c > frame pointer = 0x10:0xd763ac84 > code segment = base 0x0, limit 0xf, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = resume, IOPL = 0 > current process = 14 (idle: cpu0) > kernel: type 12 trap, code=0 > Stopped at intr_execute_handlers+0x23: lock addl %eax,0(%edx) > db> tr > intr_execute_handlers(c06d5084,d763ac9c,d763ace0,c065bbae,7) at > intr_execute_handlers+0x23 > atpic_handle_intr(7) at atpic_handle_intr+0x42 > Xatpic_intr7() at Xatpic_intr7+0x1e > --- interrupt, eip = 0xc064d655, esp = 0xd763ace0, ebp = 0xd763ace0 --- This is almost certainly addressed by jhb's atpic patch. -Nate ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
EISA Adaptec 274X SCSI panic (ISRng related)
On Sat, 15 Nov 2003, Andy Farkas wrote:
> My EISA AHA2740's don't work no more :(
# grep ahc /var/run/dmesg.boot
ahc0: at 0x2c00-0x2cff, irq 10 (level)
ahc0: on eisa0 slot 2
ahc1: at 0x4c00-0x4cff, irq 11 (level)
ahc1: on eisa0 slot 4
ahc2: port 0xf800-0xf8ff mem
0xf68fb000-0xf68fbfff irq 17 at device 11.0 on pci1
ahc2: Using left over BIOS settings
ahc3: port 0xf400-0xf4ff mem
0xf68fa000-0xf68fafff irq 18 at device 12.0 on pci1
ahc3: Using left over BIOS settings
The CD drive attached to ahc3 works ok. But ahc0 and ahc1 dont:
# dd if=/dev/da0 of=/dev/null
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0649083
stack pointer = 0x10:0xd763ac5c
frame pointer = 0x10:0xd763ac84
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= resume, IOPL = 0
current process = 14 (idle: cpu0)
kernel: type 12 trap, code=0
Stopped at intr_execute_handlers+0x23: lock addl %eax,0(%edx)
db> tr
intr_execute_handlers(c06d5084,d763ac9c,d763ace0,c065bbae,7) at
intr_execute_handlers+0x23
atpic_handle_intr(7) at atpic_handle_intr+0x42
Xatpic_intr7() at Xatpic_intr7+0x1e
--- interrupt, eip = 0xc064d655, esp = 0xd763ace0, ebp = 0xd763ace0 ---
cpu_idle_default(d763ad0c,c04f523c,c06ea740,2,c068b1fa) at cpu_idle_default+0x5
cpu_idle(c06ea740,2,c068b1fa,53,14b) at cpu_idle+0x28
idle_proc(0,d763ad48,c068b09c,311,0) at idle_proc+0x3c
fork_exit(c04f5200,0,d763ad48) at fork_exit+0xb4
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xd763ad7c, ebp = 0 ---
db>
Verbose dmesg at:
http://www.speednet.com.au/~andyf/hummer/hummer-eisa-aha-crash
--
:{ [EMAIL PROTECTED]
Andy Farkas
System Administrator
Speednet Communications
http://www.speednet.com.au/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
