RE: Problems with 4.0 keyboard input!
Hello Brian, I get the bktr device usurping its own cdevsw[] as well - I was told it was "most likely" benign, so I've been waiting for others' comments. I have looked in the source code, but what does usurping means? My English is not that good ;) The messages comes from /usr/src/sys/kern/kern_conf.c I also get the keyboard problem periodically, and I've been trying to isolate just what I do to cause it. Generally, if I reboot and don't hit a key before FreeBSD boots, it never happens. If I tap enter to abort the countdown, the keyboard scrambles perhaps one time in five. Thats what I have been doing the last five reboots, I pressed Return to let it boot faster. I shall try without. Resetting seems to be the only remedy. This persists with two different keyboard models and on unplugging and reinserting the keyboard. cut - ata0: master: setting up UDMA2 mode on PIIX4 chip OK ad0: IBM-DTTA-371440/T71OA73A ATA-4 disk at ata0 as master ad0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S ad0: piomode=4, dmamode=2, udmamode=2 ad0: 16 secs/int, 31 depth queue, DMA mode ata0: slave: setting up UDMA2 mode on PIIX4 chip OK ad1: IBM-DJNA-372200/J71OA30K ATA-4 disk at ata0 as slave ad1: 21557MB (44150400 sectors), 43800 cyls, 16 heads, 63 S/T, 512 B/S ad1: piomode=4, dmamode=2, udmamode=2 ad1: 16 secs/int, 31 depth queue, DMA mode ata1: master: setting up UDMA2 mode on PIIX4 chip OK ad2: IBM-DTTA-371440/T71OA73A ATA-4 disk at ata1 as master ad2: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S --- cut Do you have enough disk space ;-))) Thanks for you reaction. Regards, Ron. To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: Problems with 4.0 keyboard input!
In message 000401bee65b$b6fd0440$0264a8c0@.demon.nl, "Ron Klinkien" writes: I get the bktr device usurping its own cdevsw[] as well - I was told it was "most likely" benign, so I've been waiting for others' comments. I have looked in the source code, but what does usurping means? My English is not that good ;) It means "to take or assume and hold (something) by force or without right". Usually used about power in subsaharan our south american countries. -- Poul-Henning Kamp FreeBSD coreteam member [EMAIL PROTECTED] "Real hackers run -current on their laptop." FreeBSD -- It will take a long time before progress goes too far! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
RE: Problems with 4.0 keyboard input!
I have looked in the source code, but what does usurping means? My English is not that good ;) 'opslorpen' in Dutch. Nick -- e-Mail: [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
RE: Problems with 4.0 keyboard input!
In message 000401bee65b$b6fd0440$0264a8c0@.demon.nl, "Ron Klinkien" writes: I get the bktr device usurping its own cdevsw[] as well - I was told it was "most likely" benign, so I've been waiting for others' comments. I have looked in the source code, but what does usurping means? My English is not that good ;) It means "to take or assume and hold (something) by force or without right". Usually used about power in subsaharan our south american countries. Aha ok. Thanks for the explanation. Ron. To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Problems with 4.0 keyboard input!
Hello, After building a few succesfull 4.0 releases (last cvsupped on 13 aug 99), the keyboard is acting very strange, i cannot login, i get only strange characters, and when I hit CTRL I get: load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K Login through the network with telnet is no problem I also want to know what this means: WARNING: "bktr" is usurping "bktr"'s cdevsw[] It's my Brooktree video capture/tuner card This is my dmesg and config: --- dmesg --- Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #23: Fri Aug 13 22:15:49 CEST 1999 [EMAIL PROTECTED]:/usr/src/sys/compile/MOON Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 334092770 Hz CPU: Pentium II/Xeon/Celeron (334.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR real memory = 134205440 (131060K bytes) avail memory = 127098880 (124120K bytes) Preloaded elf kernel "kernel" at 0xc02e2000. VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc028c1e2 (122) VESA: Matrox Graphics Inc. Pentium Pro MTRR support enabled Probing for PnP devices: npx0: math processor on motherboard npx0: INT 16 interface pcib0: Intel 82443BX (440 BX) host to PCI bridge on motherboard pci0: PCI bus on pcib0 WARNING: "bktr" is usurping "bktr"'s cdevsw[] pcib1: Intel 82443BX (440 BX) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 vga-pci0: Matrox model 051f graphics accelerator irq 10 at device 0.0 on pci1 isab0: Intel 82371AB PCI to ISA bridge at device 4.0 on pci0 chip1: Intel PIIX4 IDE controller at device 4.1 on pci0 chip2: UHCI USB controller at device 4.2 on pci0 chip3: Intel 82371AB Power management controller at device 4.3 on pci0 bktr0: BrookTree 848A irq 14 at device 10.0 on pci0 iicbb0: I2C generic bit-banging driver on bti2c0 iicbus0: Philips I2C bus on iicbb0 master-only smbus0: System Management Bus on bti2c0 Miro TV, Temic PAL tuner. xl0: 3Com 3c905-TX Fast Etherlink XL irq 15 at device 11.0 on pci0 xl0: Ethernet address: 00:60:08:3e:74:63 xl0: autoneg complete, link status good (half-duplex, 10Mbps) ncr0: ncr 53c875 fast20 wide scsi irq 10 at device 12.0 on pci0 isa0: ISA bus on motherboard fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on isa0 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x200 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: generic printer on ppbus 0 lpt0: Interrupt-driven port isic0 at port 0xf80 iomem 0xd-0xd0fff irq 5 flags 0x2 on isa0 isic0: Teles S0/16, Creatix ISDN S0-16 or Niccy 1016 isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) (Addr=0xc00d0100) isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0xc00d0180, AddrB=0xc00d01c0) Checking for GUS Plug-n-Play ... No Plug-n-Play devices were found gus0 at port 0x220 irq 11 drq 1 flags 0x3 on isa0 snd0: GUS PNP (CS4231A) snd0: Gravis PNP (1024k) i4b: ISDN call control device attached i4bisppp: 1 ISDN SyncPPP device(s) attached i4bctl: ISDN system control port attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4btrc: 4 ISDN trace device(s) attached changing root device to da0s1a da0 at ncr0 bus 0 target 0 lun 0 da0: SEAGATE ST34371W SUN4.2G 7462 Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C) cd0 at ncr0 bus 0 target 6 lun 0 cd0: PLEXTOR CD-ROM PX-12TS 1.01 Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present --- CONFIG # # MOON -- Kernel configuration for my FreeBSD server. # # $Id: MOON,v 1.000.0.00 1999/08/09 17:12:26 ronk Exp $ machine "i386" cpu "I686_CPU" ident MOON maxusers64 options INET#InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT#FFS usable as root device [keep this!] options MSDOSFS
Re: Problems with 4.0 keyboard input!
I get the bktr device usurping its own cdevsw[] as well - I was told it was "most likely" benign, so I've been waiting for others' comments. I also get the keyboard problem periodically, and I've been trying to isolate just what I do to cause it. Generally, if I reboot and don't hit a key before FreeBSD boots, it never happens. If I tap enter to abort the countdown, the keyboard scrambles perhaps one time in five. Resetting seems to be the only remedy. This persists with two different keyboard models and on unplugging and reinserting the keyboard. Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #10: Fri Aug 13 07:02:32 CDT 1999 [EMAIL PROTECTED]:/usr/src/sys/compile/DOCENT Timecounter "i8254" frequency 1193182 Hz CPU: Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real memory = 536870912 (524288K bytes) avail memory = 518422528 (506272K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee0 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0 Preloaded elf kernel "kernel" at 0xc028f000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc028f09c. Pentium Pro MTRR support enabled Probing for PnP devices: npx0: math processor on motherboard npx0: INT 16 interface pcib0: Intel 82443BX (440 BX) host to PCI bridge on motherboard pci0: PCI bus on pcib0 WARNING: "bktr" is usurping "bktr"'s cdevsw[] pcib1: Intel 82443BX (440 BX) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 vga-pci0: NVidia Riva TNT graphics accelerator irq 16 at device 0.0 on pci1 isab0: Intel 82371AB PCI to ISA bridge at device 7.0 on pci0 ata-pci0: Intel PIIX4 IDE controller at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 chip1: UHCI USB controller at device 7.2 on pci0 chip2: Intel 82371AB Power management controller at device 7.3 on pci0 bktr0: BrookTree 878 irq 16 at device 16.0 on pci0 iicbb0: I2C generic bit-banging driver on bti2c0 iicbus0: Philips I2C bus on iicbb0 master-only smbus0: System Management Bus on bti2c0 Hauppauge Model 62471 A Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, dbx stereo. pci0: unknown card DD^0878 (vendor=0x109e, dev=0x0878) at 16.1 irq 16 pcm0: AudioPCI ES1370 irq 18 at device 18.0 on pci0 pcm0: using I/O space register mapping at 0xef00 fxp0: Intel EtherExpress Pro 10/100B Ethernet irq 19 at device 19.0 on pci0 fxp0: Ethernet address 00:90:27:18:a6:fa xl0: 3Com 3c905B-TX Fast Etherlink XL irq 16 at device 20.0 on pci0 xl0: Ethernet address: 00:50:04:01:77:7b xl0: autoneg complete, link status good (half-duplex, 100Mbps) isa0: ISA bus on motherboard fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5" drive on fdc0 drive 0 atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on isa0 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x200 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging disabled SMP: AP CPU #1 Launched! ata0: master: setting up UDMA2 mode on PIIX4 chip OK ad0: IBM-DTTA-371440/T71OA73A ATA-4 disk at ata0 as master ad0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S ad0: piomode=4, dmamode=2, udmamode=2 ad0: 16 secs/int, 31 depth queue, DMA mode ata0: slave: setting up UDMA2 mode on PIIX4 chip OK ad1: IBM-DJNA-372200/J71OA30K ATA-4 disk at ata0 as slave ad1: 21557MB (44150400 sectors), 43800 cyls, 16 heads, 63 S/T, 512 B/S ad1: piomode=4, dmamode=2, udmamode=2 ad1: 16 secs/int, 31 depth queue, DMA mode ata1: master: setting up UDMA2 mode on PIIX4 chip OK ad2: IBM-DTTA-371440/T71OA73A ATA-4 disk at ata1 as master ad2: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S ad2: piomode=4, dmamode=2, udmamode=2 ad2: 16 secs/int, 31 depth queue, DMA mode atapi: piomode=4, dmamode=2, udmamode=-1 ata1: slave: setting up WDMA2 mode on PIIX3/4 chip OK atapi: DMA transfer mode set acd0: CRW6206A/1.2A CDROM drive at ata1 as slave acd0: drive speed 344 - 1034KB/sec, 384KB cache, DMA acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: supported write types: CD-R, CD-RW, test write acd0: Audio: play, 128 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked, lock protected machine i386 cpu I686_CPU
Re: Problems with 4.0 keyboard input!
In message 01bee5f0$c467c7c0$0264a8c0@.demon.nl "Ron Klinkien" writes: : After building a few succesfull 4.0 releases (last cvsupped on 13 aug 99), : the keyboard is acting very strange, i cannot login, : i get only strange characters, and when I hit CTRL I get: : : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K I get that too from time to time. I think that the boot blocks are putting the keyboard into an odd state since I sometimes can't break into the boot sequence to boot an alternate kernel. So far it has been confined to my Sony VAIO. Never could come up with a good test case for it, however Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: Problems with 4.0 keyboard input!
[...]
I also get the keyboard problem periodically, and I've been
trying to isolate just what I do to cause it. Generally, if I
reboot and don't hit a key before FreeBSD boots, it never
happens. If I tap enter to abort the countdown, the keyboard
scrambles perhaps one time in five.
If you hit the keyboard at the "wrong" moment during keyboard
initialization, the keyboard driver may get confused.
In your case, you type something before the kernel is loaded and that
seems to be causing the trouble.
Such key input should be discarded by the keyboard driver before it
tries to initialize the keyboard. There may be a nasty timing problem
here...
As a temporary workaround, please apply the following patch to
/sys/dev/atkbd.c and see how it works.
Kazu
Resetting seems to be the only remedy. This persists with two
different keyboard models and on unplugging and reinserting the
keyboard.
Index: atkbd.c
===
RCS file: /src/CVS/src/sys/dev/kbd/atkbd.c,v
retrieving revision 1.12
diff -u -r1.12 atkbd.c
--- atkbd.c 1999/07/18 06:16:25 1.12
+++ atkbd.c 1999/08/14 03:10:40
@@ -1153,7 +1178,7 @@
}
/* save the current controller command byte */
- empty_both_buffers(kbdc, 10);
+ empty_both_buffers(kbdc, 200);
c = get_controller_command_byte(kbdc);
if (c == -1) {
/* CONTROLLER ERROR */
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Re: Problems with 4.0 keyboard input!
In message 01bee5f0$c467c7c0$0264a8c0@.demon.nl "Ron Klinkien" writes: : After building a few succesfull 4.0 releases (last cvsupped on 13 aug 99), : the keyboard is acting very strange, i cannot login, : i get only strange characters, and when I hit CTRL I get: : : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K : load: 0.04 cmd: login242 [ttyin] 0.01u 0.03s 0% 772K I get that too from time to time. I think that the boot blocks are putting the keyboard into an odd state since I sometimes can't break into the boot sequence to boot an alternate kernel. So far it has been confined to my Sony VAIO. Never could come up with a good test case for it, however It's not the boot blocks doing anything explicit; they just use the BIOS. -- \\ The mind's the standard \\ Mike Smith \\ of the man. \\ [EMAIL PROTECTED] \\-- Joseph Merrick \\ [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: Problems with 4.0 keyboard input!
In message [EMAIL PROTECTED] Mike Smith writes: : It's not the boot blocks doing anything explicit; they just use the BIOS. I have noticed that boot[12] doesn't seem to have this problem. However, after /boot/loader has been loaded, I see this problem from time to time. I don't know what is going on, I'm just reporting what I've seen Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: Problems with 4.0 keyboard input!
In message [EMAIL PROTECTED] Mike Smith writes: : It's not the boot blocks doing anything explicit; they just use the BIOS. I have noticed that boot[12] doesn't seem to have this problem. However, after /boot/loader has been loaded, I see this problem from time to time. I don't know what is going on, I'm just reporting what I've seen *mumble* We're seeing a few cases where BIOS code in the boot path isn't working too well (or at all) when run in vm86 mode. 8( -- \\ The mind's the standard \\ Mike Smith \\ of the man. \\ [EMAIL PROTECTED] \\-- Joseph Merrick \\ [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
