pidgin 2.6.5 login QQ failed
hi, upgrade all software after upgrade to 8.0. and now found that pidgin login qq failed. any ideas? TIA ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Missing all ttyv* device nodes after upgrade 7.0 - 7.2
These dmesg lines are from another 7.2 machine and I am missing them from the output of this newly upgraded machine: sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Both devices are in the kernel. What could prevent them from binding? Is it maybe a newer system that has keyboard and mouse set to USB as a default which needs disabling in BIOS? I know a machine I just built I set the keyboard to Legacy to use the PS/2 port while the mouse stayed USB. -Mike Thanks for your answer Mike. The system is actually an old Celeron on an Intel i865 based mainboard so the hardware should be pretty well supported I guess and after all - it did work with 7.0. The machine is only used as a router so the lack of virtual terminals aren't critical but I still would like to solve it. I will have the owner look for a more recent BIOS and then I'll reinstall the GENERIC kernel before filing a bug report. Here's a more verbose dmesg snippet that might give someone a clue: agp0: Intel 82865 host to AGP bridge on hostb0 agp0: allocating GATT for aperture of size 128M vgapci0: VGA-compatible display mem 0xf800-0xf8ff,0xe000-0xefff,0xf900-0xf9ff irq 3 at device 0.0 on pci1 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 sc0: no video adapter found. sc0: System console failed to probe on isa0 vga0: Generic ISA VGA failed to probe on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices What is that vt0 (disabled)? Is that related? pciconf reports this: pc...@pci0:0:1:0: class=0x060400 card=0x chip=0x25718086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82865G/PE/P, 82848P PCI-to-AGP Bridge' class = bridge subclass = PCI-PCI is...@pci0:0:31:0: class=0x060100 card=0x chip=0x24d08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' class = bridge subclass = PCI-ISA vgap...@pci0:1:0:0: class=0x03 card=0x2034107d chip=0x022010de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' class = display subclass = VGA Googling on this turns up a lot of older posts with references to PnP incompatibilities and ATA but I can't find any info that helps me with syscons. Regards Morgan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Help with core dump
Hi, I've installed from ports net-im/mu-conference, but whenever I try to start it I get a core dump. Running it through gdb I get the following: ]# gdb /usr/local/bin/mu-conference GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as amd64-marcel-freebsd...(no debugging symbols found)... (gdb) run -c /usr/local/etc/muc.xml Starting program: /usr/local/bin/mu-conference -c /usr/local/etc/muc.xml (no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...[New LWP 100228] (no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...[New Thread 8015021c0 (LWP 100228)] Jabber Component Runtime -- 0.2.4 (c) 2003-2004 Paul Curtis Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 8015021c0 (LWP 100228)] 0x000800eaa386 in strlen () from /lib/libc.so.7 (gdb) # uname -a FreeBSD it05.ex.local 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 # cat /usr/local/etc/muc.xml jcr !-- This is a config file for a copy of MU-Conference, compiled against the Jabber Component Runtime (JCR). This is the same file that I use to connect to my development server, running jabberd2 beta2 In order to connect to a jabberd v1.4 server, simply change the name value to muclinker, and make sure the muclinker section is in your main jabber.xml file, as per the MU-Conference README file. -- nameconference.localhost/name !-- the jid of your component -- hostconference.localhost/host !-- this should be the same as above -- iplocalhost/ip !-- adress of the jabber server -- port7009/port !-- port used to connect the service to the jabber server -- secretVonyunya/secret !-- secret shared with the jabber server -- spool/var/spool/jabberd/conference.localhost/spool !-- directory containing the rooms data -- logdir/logdir !-- directory containing the debug log (the file is called mu-conference.log) -- pidfile/var/run/jabberd/mu-conference.pid/pidfile !-- file that will contain the PID of the process -- !-- logstderr/ -- !-- uncomment to also send log to stderr -- loglevel155/loglevel !-- log verbosity, 255 for very verbose, 0 for quiet -- conference xmlns=jabber:config:conference public/ !-- rooms are public when created, comment to make them private by default -- !-- the vCard section contains the vCard of the service -- vCard FNPublic Chatrooms/FN DESCThis service is for public chatrooms./DESC URLhttp://foo.bar//URL /vCard history40/history !-- maximum numbers of history lines send when joining a room -- logdir/var/spool/jabberd/conference.localhost/logs//logdir !-- where to store the room logs, comment to disable logging -- !--logsubdirs/-- !-- uncomment to stores the room logs in subdirs (for example 2007/08/02) -- stylesheet../style.css/stylesheet !--URL of the log stylesheet -- !-- default text to send to legacy clients, will also be used in the logs -- notice joinhas become available/join leavehas left/leave renameis now known as/rename /notice !-- lists of admins of the service, add a user/ tag by admin -- sadmin userad...@localhost/user /sadmin dynamic/ !-- persistent/ -- !-- persistent rooms will be created, overide dynamic/ -- !-- locknicks/ -- !-- enforce the user nickname to the user part of his jid -- !-- roomlock/ -- !-- uncomment to allow only admins to create rooms -- hideempty/ !-- configuration of MySQL, only used if the MySQL exports is activated, see README.sql -- !--mysql userroot/user pass/ databasechat/database hostlocalhost/host /mysql-- /conference /jcr Any idea what can be wrong? Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Help with core dump
El 20/01/10 10:18, Matias escribió: Hi, I've installed from ports net-im/mu-conference, but whenever I try to start it I get a core dump. Running it through gdb I get the following: ]# gdb /usr/local/bin/mu-conference GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type show copying to see the conditions. There is absolutely no warranty for GDB. Type show warranty for details. This GDB was configured as amd64-marcel-freebsd...(no debugging symbols found)... (gdb) run -c /usr/local/etc/muc.xml Starting program: /usr/local/bin/mu-conference -c /usr/local/etc/muc.xml (no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...[New LWP 100228] (no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)...[New Thread 8015021c0 (LWP 100228)] Jabber Component Runtime -- 0.2.4 (c) 2003-2004 Paul Curtis Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 8015021c0 (LWP 100228)] 0x000800eaa386 in strlen () from /lib/libc.so.7 (gdb) # uname -a FreeBSD it05.ex.local 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 # cat /usr/local/etc/muc.xml jcr !-- This is a config file for a copy of MU-Conference, compiled against the Jabber Component Runtime (JCR). This is the same file that I use to connect to my development server, running jabberd2 beta2 In order to connect to a jabberd v1.4 server, simply change the name value to muclinker, and make sure the muclinker section is in your main jabber.xml file, as per the MU-Conference README file. -- nameconference.localhost/name !-- the jid of your component -- hostconference.localhost/host !-- this should be the same as above -- iplocalhost/ip !-- adress of the jabber server -- port7009/port !-- port used to connect the service to the jabber server -- secretVonyunya/secret !-- secret shared with the jabber server -- spool/var/spool/jabberd/conference.localhost/spool !-- directory containing the rooms data -- logdir/logdir !-- directory containing the debug log (the file is called mu-conference.log) -- pidfile/var/run/jabberd/mu-conference.pid/pidfile !-- file that will contain the PID of the process -- !-- logstderr/ -- !-- uncomment to also send log to stderr -- loglevel155/loglevel !-- log verbosity, 255 for very verbose, 0 for quiet -- conference xmlns=jabber:config:conference public/ !-- rooms are public when created, comment to make them private by default -- !-- the vCard section contains the vCard of the service -- vCard FNPublic Chatrooms/FN DESCThis service is for public chatrooms./DESC URLhttp://foo.bar//URL /vCard history40/history !-- maximum numbers of history lines send when joining a room -- logdir/var/spool/jabberd/conference.localhost/logs//logdir !-- where to store the room logs, comment to disable logging -- !--logsubdirs/-- !-- uncomment to stores the room logs in subdirs (for example 2007/08/02) -- stylesheet../style.css/stylesheet !--URL of the log stylesheet -- !-- default text to send to legacy clients, will also be used in the logs -- notice joinhas become available/join leavehas left/leave renameis now known as/rename /notice !-- lists of admins of the service, add a user/ tag by admin -- sadmin userad...@localhost/user /sadmin dynamic/ !-- persistent/ -- !-- persistent rooms will be created, overide dynamic/ -- !-- locknicks/ -- !-- enforce the user nickname to the user part of his jid -- !-- roomlock/ -- !-- uncomment to allow only admins to create rooms -- hideempty/ !-- configuration of MySQL, only used if the MySQL exports is activated, see README.sql -- !--mysql userroot/user pass/ databasechat/database hostlocalhost/host /mysql-- /conference /jcr Any idea what can be wrong? Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org I've finally solved it by enabling linux compatibility kernel module. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Restarting after Make Install....
On Tue, 19 Jan 2010 20:13:33 -0500 Roger Roger rno...@gmail.com articulated: I'm not a FreeBSD expert so I cannot speak about what is considered best pratices but I never restart my server after doing a port install/reinstall/upgrade/removal. I guess the only time you will need to do that is when your port may be a kernel module that cannot be unloaded/reloaded without causing major problems. I only do a ports update when there are a significance number of programs that I have installed that have updates available. If the major players like OpenLDAP, MySQL, Postfix, Apache, etc are all to be updated at one time, I usually choose to reboot after the process has completed. It is not that I feel it is absolutely necessary; but rather that I want to insure that they will in fact all start up correctly, and in some cases, like Postfix, in the correct order. I have on rare occasions found discrepancies on how the system starts and performs after a major update. At worst, you lose only a minute or so of up time, assuming your machine is not a mission critical one. At best, you might discover a problem that might have gone unknown for an extended period of time. I think that the old English saying: six of one, a half dozen of the other is appropriate to the situation. Just my 2¢. -- Jerry ges...@yahoo.com |=== |=== |=== |=== | You are only young once, but you can stay immature indefinitely. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: 8.0-RELEASE / gpart / GPT / marking a partition as active
On Tue, 2010-01-19 at 19:11 +0200, Dan Naumov wrote: It seems that quite a few BIOSes have serious issues booting off disks using GPT partitioning when no partition present is marked as active. See http://www.freebsd.org/cgi/query-pr.cgi?pr=115406cat=bin for a prime example. In 8.0-RELEASE, using gpart, setting a slice as active in MBR partitioning mode is trivial, ie: gpart set -a active -i 1 DISKNAME However, trying to do the same thing with GPT partitioning yields no results: gpart set -a active -i 1 DISKNAME gpart: attrib 'active': Device not configured As a result of this issue, I can configure and make a succesfull install using GPT in 8.0, but I cannot boot off it using my Intel D945GCLF2 board. I have the same board... I have found this discussion from about a month ago: http://www.mail-archive.com/freebsd-sta...@freebsd.org/msg106918.html where Robert mentions that gpart set -a active -i 1 is no longer needed in 8-STABLE, because the pmbr will be marked as active during the installation of the bootcode. Is there anything I can do to archieve the same result in 8.0-RELEASE or is installing from a snapshop of 8-STABLE my only option? Prior to fixing gpart to take care of this, I used fdisk to set the active partition. gpart knows the disk is GPT and GPT doesn't have an active parameter, so the above command doesn't (perhaps never) worked. Basically, an fdisk -a /dev/devX is what you want... robert. Thanks. - Sincerely, Dan Naumov -- Robert Noland rnol...@freebsd.org FreeBSD ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Please help me
hi, yesterday i have modify squid.conf file.i have use vi editior.but i cannot delete in text message. following error ^? appear.How to do it?. please help me. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
SunFire X2100 fails
Hello, I recently got a SunFire X2100 to play with (first version, not M2). Linux (Debian) and 7.2-RELEASE works without problems, just installs straight-away and runs fine (currently 31 days uptime). But 8.0-RELEASE does not work, neither when being upgraded nor when installing from CD or memstick. The problem is: The kernel does not recognize the slices and partitions. When installing it, the installer shows me a single slice on each of the two hard disks though there are more. It also shows a warning about a GPT-label, no matter whether there is a GPT or MBR on it. After reslicing and -partitioning them, the installer fails when creating a filesystem on them, saying the devices (in this case the partitions) are not configured. Looking at the disk with Linux shows me that the partitions and slices were created properly at this point. When upgrading from 7.2 to 8.0, I'll be dropped to the mount-shell when restarting after doing the freebsd-update of the kernel. The possible mount-options the kernel recognizes are two labels (mbr/hdds, I think), the disks themselves and one slice on each disk, no partitions nor the other slices. Nothing capable of booting is found on the disks/slices anyway when I try to boot from them. As I currently have 7.2 on it, I can only show you the information I'll get from that one. # lspci 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) 05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) Regards, Julian Fagir ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Missing all ttyv* device nodes after upgrade 7.0 - 7.2
Morgan Wesström wrote: These dmesg lines are from another 7.2 machine and I am missing them from the output of this newly upgraded machine: sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 [snip] Thanks for your answer Mike. The system is actually an old Celeron on an Intel i865 based mainboard so the hardware should be pretty well supported I guess and after all - it did work with 7.0. The machine is only used as a router so the lack of virtual terminals aren't critical but I still would like to solve it. I will have the owner look for a more recent BIOS and then I'll reinstall the GENERIC kernel before filing a bug report. Here's a more verbose dmesg snippet that might give someone a clue: I have an Asus P5P800SE i865 motherboard here with a Pentium D 940 on it. It is currently running 8-Release and does not exhibit this problem. Right now there is still an AGP video card in it. agp0: Intel 82865 host to AGP bridge on hostb0 agp0: allocating GATT for aperture of size 128M vgapci0: VGA-compatible display mem 0xf800-0xf8ff,0xe000-0xefff,0xf900-0xf9ff irq 3 at device 0.0 on pci1 This is an odd IRQ for a video card to come up on, as this is usually reserved for one of the COMM ports. Maybe an IRQ conflict here. isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 sc0: no video adapter found. sc0: System console failed to probe on isa0 vga0: Generic ISA VGA failed to probe on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Below is a snippet from mine. You didn't remove device vga from the kernel by any chance? Switching back to GENERIC for a test is probably a good idea as it may remove a variable from the problem. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] The BIOS selection for PnP OS support should be Off. Irregardless, this looks like botched PnP probing by the BIOS. Only idea comes to mind right away is if you are using a PCI video card instead of AGP there is a BIOS selection which chooses which is initialized first. There is usually also one somewhere about whether to assign an IRQ to the video card. IRQ 3 just looks wrong. Check the mobo manual for slot sharing. A lot of motherboards will do something like share IRQs between the AGP slot and the first PCI slot (and/or others as well), with the sharing usually involving the AGP, the PCI slot, and USB controller(s). There is usually a chart in the manual which shows what is shared and where. I have such a chart in mine. What is that vt0 (disabled)? Is that related? pciconf reports this: pc...@pci0:0:1:0: class=0x060400 card=0x chip=0x25718086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82865G/PE/P, 82848P PCI-to-AGP Bridge' class = bridge subclass = PCI-PCI is...@pci0:0:31:0:class=0x060100 card=0x chip=0x24d08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' class = bridge subclass = PCI-ISA vgap...@pci0:1:0:0: class=0x03 card=0x2034107d chip=0x022010de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' class = display subclass = VGA This is mine (with AGP video card): vgap...@pci0:1:0:0: class=0x03 card=0x chip=0x00f110de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'GeForce 6600 GT AGP (NV43+BR02)' class = display subclass = VGA Notice in yours above the 'device' line is missing, Googling on this turns up a lot of older posts with references to PnP incompatibilities and ATA but I can't find any info that helps me with syscons. Funny thing is it worked in 7.0 previously? At first glance this smells like BIOS PnP probing problems, but I think if it were it would have showed itself before. Try GENERIC and see what happens. If it goes away you know where to look. -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: SunFire X2100 fails
Julian Fagir wrote: Hello, I recently got a SunFire X2100 to play with (first version, not M2). Linux (Debian) and 7.2-RELEASE works without problems, just installs straight-away and runs fine (currently 31 days uptime). But 8.0-RELEASE does not work, neither when being upgraded nor when installing from CD or memstick. The problem is: The kernel does not recognize the slices and partitions. When installing it, the installer shows me a single slice on each of the two hard disks though there are more. It also shows a warning about a GPT-label, no matter whether there is a GPT or MBR on it. After reslicing and -partitioning them, the installer fails when creating a filesystem on them, saying the devices (in this case the partitions) are not configured. [snip] This sounds very familiar to something I just went through. A drive went up in smoke and the spare I pulled from the shelf had 6.2 on it. The 8 Release install would fail, something to do with either the partition table and/or labels from the earlier being invisible to the new and thus could not be written to. Boot a LiveFS CD, then at a root prompt do: sysctl kern.geom.debugflags=16 and: dd if=/dev/zero of=/dev/adx oseek=1 bs=512 count=1 where x equals your drive number. Probably should only do this before a fresh install and NOT on a system with data you want to keep. The exact error I received whilst trying to install 8 in sysinstall was this: Unable to find device node for /dev/ad4s1b in /dev! The creation of filesystems will be aborted. Then pressing OK brings this: Couldn't make filesystems properly. Aborting. -Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Restarting after Make Install....
On Wed, Jan 20, 2010 at 6:44 AM, Jerry ges...@yahoo.com wrote: On Tue, 19 Jan 2010 20:13:33 -0500 Roger Roger rno...@gmail.com articulated: I'm not a FreeBSD expert so I cannot speak about what is considered best pratices but I never restart my server after doing a port install/reinstall/upgrade/removal. I guess the only time you will need to do that is when your port may be a kernel module that cannot be unloaded/reloaded without causing major problems. I only do a ports update when there are a significance number of programs that I have installed that have updates available. If the major players like OpenLDAP, MySQL, Postfix, Apache, etc are all to be updated at one time, I usually choose to reboot after the process has completed. It is not that I feel it is absolutely necessary; but rather that I want to insure that they will in fact all start up correctly, and in some cases, like Postfix, in the correct order. I have on rare occasions found discrepancies on how the system starts and performs after a major update. At worst, you lose only a minute or so of up time, assuming your machine is not a mission critical one. At best, you might discover a problem that might have gone unknown for an extended period of time. I think that the old English saying: six of one, a half dozen of the other is appropriate to the situation. Just my 2¢. -- Jerry ges...@yahoo.com |=== |=== |=== |=== | You are only young once, but you can stay immature indefinitely. Thank you for sharing your procedure. I do not have enough time with FreeBSD but it helps to read about different things other people are doing. I really admire and appreciate the quality of this mailing list. -r ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Missing all ttyv* device nodes after upgrade 7.0 - 7.2
Michael Powell wrote: agp0: Intel 82865 host to AGP bridge on hostb0 agp0: allocating GATT for aperture of size 128M vgapci0: VGA-compatible display mem 0xf800-0xf8ff,0xe000-0xefff,0xf900-0xf9ff irq 3 at device 0.0 on pci1 This is an odd IRQ for a video card to come up on, as this is usually reserved for one of the COMM ports. Maybe an IRQ conflict here. I noticed that too :-) Below is a snippet from mine. You didn't remove device vga from the kernel by any chance? Switching back to GENERIC for a test is probably a good idea as it may remove a variable from the problem. No, all of syscons dependencies (according to the man page) are still there. Funny thing is it worked in 7.0 previously? At first glance this smells like BIOS PnP probing problems, but I think if it were it would have showed itself before. Try GENERIC and see what happens. If it goes away you know where to look. It appears this computer has an i865G chipset (built-in graphics) as well as an extra nvidia card. The output from devinfo shows that agp is attaching to hostb0 instead of vgapci0 so I will ask the person to remove the nvidia card and only run from the built-in graphics. PnP most likely seems to be the culprit here for sure. Thanks again for your input. pcib0 pci0 hostb0 agp0 pcib1 pci1 vgapci0 /Morgan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: [audio] Why pcm audio signal can't be read back through pcm channel?
Hi. How about mixer =rec vol or mixer =rec pcm ? At Fri, 15 Jan 2010 11:40:10 -0800, Yuri wrote: I noticed that I can't record sound that comes from pcm channel. For example audacity only records my voice coming from mic, but doesn't record other person's voice that skype sends into pcm channel. This used to work before. I look at mixer -- all channels are open. Why pcm doesn't get sent back? Is there something wrong with mixer? snd_es137x.ko is used: pcm0: AudioPCI ES1370 port 0xec00-0xec3f irq 17 at device 1.0 on pci8 pcm0: es1370_wrcodec: timed out pcm0: es1370_wrcodec: timed out pcm0: es1370_wrcodec: timed out pcm0: [ITHREAD] pcm0: Playback: DAC1,DAC2 / Record: ADC Yuri --- WATANABE Kazuhiro (cqg00...@nifty.ne.jp) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
freebsd 8.0 slow boot
Hi, After boot loader multi choice menu FreeBSD 8.0 waits about 2 ~ minutes to boot just showing | sign. As far as I know FreeBSD 8.0 uses a new TTY subsystem OLD one: w 6:28PM up 5 days, 4:09, 2 users, load averages: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE WHAT root p0 NEW one (with 8.0) w 12:26AM up 11 mins, 2 users, load averages: 0.00, 0.02, 0.02 USER TTY FROM LOGIN@ IDLE WHAT root pts/1 I think this is related with that. Is there any option to use old TTY subsystem on 8.0 or how can I speed up that boot wait process. Regards. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: freebsd 8.0 slow boot
On Wed, Jan 20, 2010 at 10:00 PM, Omer Faruk Sen omerf...@gmail.com wrote: Hi, After boot loader multi choice menu FreeBSD 8.0 waits about 2 ~ minutes to boot just showing | sign. As far as I know FreeBSD 8.0 uses a new TTY subsystem OLD one: w 6:28PM up 5 days, 4:09, 2 users, load averages: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE WHAT root p0 NEW one (with 8.0) w 12:26AM up 11 mins, 2 users, load averages: 0.00, 0.02, 0.02 USER TTY FROM LOGIN@ IDLE WHAT root pts/1 I think this is related with that. Is there any option to use old TTY subsystem on 8.0 or how can I speed up that boot wait process. Regards. I am having the same problem with a dual processor Intel board. Would be interested if any setting can speed up the boot process. Amitabh Kant ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Missing all ttyv* device nodes after upgrade 7.0 - 7.2
Morgan Wesström wrote: Michael Powell wrote: agp0: Intel 82865 host to AGP bridge on hostb0 agp0: allocating GATT for aperture of size 128M vgapci0: VGA-compatible display mem 0xf800-0xf8ff,0xe000-0xefff,0xf900-0xf9ff irq 3 at device 0.0 on pci1 This is an odd IRQ for a video card to come up on, as this is usually reserved for one of the COMM ports. Maybe an IRQ conflict here. I noticed that too :-) Below is a snippet from mine. You didn't remove device vga from the kernel by any chance? Switching back to GENERIC for a test is probably a good idea as it may remove a variable from the problem. No, all of syscons dependencies (according to the man page) are still there. Funny thing is it worked in 7.0 previously? At first glance this smells like BIOS PnP probing problems, but I think if it were it would have showed itself before. Try GENERIC and see what happens. If it goes away you know where to look. Turned out the graphics adapter had died when he got to the computer. Case closed and kudos to FreeBSD for still running all other services without complaining. :-) /Morgan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Please help me
On Wed, Jan 20, 2010 at 01:10:48PM +0630, komyo gyi wrote: hi, yesterday i have modify squid.conf file.i have use vi editior.but i cannot delete in text message. following error ^? appear.How to do it?. please help me. Looks like you're hitting the Delete key. That's not a valid vi command. You need to be in command mode and hit the 'x' key. -- Jonathan Chen j...@chen.org.nz -- The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: dovecot/jail question
Sam Fourman Jr. sfour...@gmail.com wrote: On Tue, Jan 19, 2010 at 4:18 PM, Jim stapleton...@gmail.com wrote: First, Thanks all for the help with my previous sendmail question. I rebuilt the jail without postfix and that at least seems happy. So does this mean that you can NOT run postfix in a FreeBSD 8 Jail? I didn't know this, I just assumed postfix in a Jail would work. if possible could someone confirm this? I can confirm that Postfix, Dovecot, and Squirrelmail do run in jails, and I do assume that almost every mailing system will do as well. Regards, Michael -- to let ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
On Tue, January 19, 2010 12:35, Chuck Swiger wrote: Hi-- On Jan 19, 2010, at 10:04 AM, Doug Poland wrote: No joy. # sysctl kern.corefile=/var/crash/clamd.core # /usr/local/etc/rc.d/clamav-clamd start Starting clamav_clamd. Segmentation fault # ll /var/crash total 2 -rw-r--r-- 1 root wheel 5 Apr 10 2005 minfree Please see man 5 core; in particular, clamd changes userid: By default, a process that changes user or group credentials whether real or effective will not create a corefile. This behaviour can be changed to generate a core dump by setting the sysctl(8) variable kern.sugid_coredump to 1. ...so you will need to toggle that sysctl also. I'd suggest doing something more like: mkdir /cores chmod 1777 /cores sysctl kern.sugid_coredump=1 sysctl kern.corefile=/cores/%N.%P.core ...but adjust the path to be under /var or /usr if free diskspace makes doing so necessary. Thanks for the suggestion and the pointer to man 5 core. I implemented your suggestions but still get no core dump. Very strange... -- Regards, Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
Hi--
On Jan 20, 2010, at 12:46 PM, Doug Poland wrote:
Thanks for the suggestion and the pointer to man 5 core. I
implemented your suggestions but still get no core dump. Very
strange...
Check your default resource limits (shell startup files /etc/login.conf) and
see whether coredumpsize is set to 0, maybe? If you build and run:
% cat crash.c
#include stdlib.h
main()
{
char *bad = NULL;
bad[0] = '1';
}
% cc -o crash crash.c
% ./crash
[1]16550 segmentation fault (core dumped) ./crash
% ls /cores
crash.16550.core
...do you get this trivial program to dump core?
Regards,
--
-Chuck
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
On Wed, January 20, 2010 15:05, Chuck Swiger wrote:
Hi--
On Jan 20, 2010, at 12:46 PM, Doug Poland wrote:
Thanks for the suggestion and the pointer to man 5 core. I
implemented your suggestions but still get no core dump. Very
strange...
Check your default resource limits (shell startup files
/etc/login.conf) and see whether coredumpsize is set to 0, maybe?
Nope, nothin'
% set | grep core | egrep -v grep
% env | grep core | egrep -v grep
% grep core /etc/login.c* | egrep -v #
/etc/login.conf::coredumpsize=unlimited:\
If you build and run:
% cat crash.c
#include stdlib.h
main()
{
char *bad = NULL;
bad[0] = '1';
}
% cc -o crash crash.c
% ./crash
[1]16550 segmentation fault (core dumped) ./crash
% ls /cores
crash.16550.core
...do you get this trivial program to dump core?
No, not on the system in question. Just tried it on a plain-vanilla
8.0-RELEASE box I just built and I do get the the core dump there.
% echo $SHELL
/bin/tcsh
% uname -a
FreeBSD hostname.domain.com 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0:
Sat Sep 12 11:15:05 CDT 2009
r...@hostname.domain.com:/usr/obj/usr/src/sys/GENERIC-SERVER i386
% cat /sys/i386/conf/GENERIC-SERVER
ident GENERIC-SERVER
include GENERIC
options INCLUDE_CONFIG_FILE # Include this file in kernel
options QUOTA
% sysctl -a | grep core
kern.corefile: /var/coredumps/%U/%N.core
kern.nodump_coredump: 0
kern.coredump: 1
kern.sugid_coredump: 1
debug.elf32_legacy_coredump: 1
% touch /var/coredumps/file
% ll !$
ll /var/coredumps/file
-rw-r--r-- 1 doug wheel 0 Jan 20 15:13 /var/coredumps/file
--
Regards,
Doug
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
Hi-- On Jan 20, 2010, at 1:24 PM, Doug Poland wrote: % sysctl -a | grep core kern.corefile: /var/coredumps/%U/%N.core Does /var/coredumps/doug and/or /var/coredumps/clamav exist and have appropriate permissions (or be 1777 like /tmp to avoid a problem with that)...? -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
On Wed, 20 Jan 2010 15:24:51 -0600 Doug Poland wrote: % sysctl -a | grep core kern.corefile: /var/coredumps/%U/%N.core As CORE(5) says %U is a UID... % touch /var/coredumps/file % ll !$ ll /var/coredumps/file -rw-r--r-- 1 doug wheel 0 Jan 20 15:13 /var/coredumps/file ... so you should have a directory /var/coredumps/UID owned by (well, at least have permissions to write by) this UID. -- WBR, Boris Samorodov (bsam) Research Engineer, http://www.ipt.ru Telephone Internet SP FreeBSD Committer, http://www.FreeBSD.org The Power To Serve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
High availability SQL server setup
Hi all, For some time, I've been considering consolidating all/most of our SQL databases (all MySQL) onto a single dedicated cluster setup. I'm looking for feedback on the best way to do this. All of the options I've considered so far have both their drawbacks and benefits. From what I can tell, there's no one single way to be able to have everything that I want. Off the bat, I haven't found a way to create a cluster that can have more than one host in the cluster writable. My objective would be to start with two very high end boxes. One would sit in my primary location, the other a few blocks away over a gi fibre link. I would want the remote box to pick up immediately if the master server fails. I figure I could achieve this using network trickery for IP failover, CARP or the like and span a couple of vlans across the fibre. I would want each SQL server connected to separate edge routers to ensure both server and network resilience. Each box has two GigE NICs, so off the bat, I'd have each box doing VRRP to two separate edge gear at each location. My concern is, is that I can't envision how both boxes could possibly stay in a continuous state that would allow such fail-over, and fail-back. (fail-back is less of a concern...if it comes to it, I'd rebuild by hand if necessary). I've considered ZFS replication, but there could be several minutes worth of snapshot missing if the primary fails. I already have MySQL replication in many spots, but that's only one write master and read-only slaves. Can you provide any details or new ideas that I'm missing in order to have the holy grail of SQL redundancy? Cheers, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Trouble getting a core dump from clamd
On 2010-01-20 17:11, Boris Samorodov wrote: On Wed, 20 Jan 2010 15:24:51 -0600 Doug Poland wrote: % sysctl -a | grep core kern.corefile: /var/coredumps/%U/%N.core As CORE(5) says %U is a UID... % touch /var/coredumps/file % ll !$ ll /var/coredumps/file -rw-r--r-- 1 doug wheel 0 Jan 20 15:13 /var/coredumps/file ... so you should have a directory /var/coredumps/UID owned by (well, at least have permissions to write by) this UID. That was it, thanks for the keen vision! -- Regards, Doug ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ssh to root
I need to set up a machine so that I can type ssh [host] as root from some other host and I get a prompt with super user privs... I already have set this up for u...@host for root and ssh host for normal users... but root still asks for a password after I set the authorized_keys file in ~root/.ssh.. I have looked at ssh_config(5) but can't tell what option (if any) does this... if anyone is coruious the final goal here is to set up a sysutils/fusefs-ssh for this host (already installed and working for normal users but want to make it so it is done as root) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ssh to root
Hi, Aryeh M. Friedman wrote: I need to set up a machine so that I can type ssh [host] as root from some other host and I get a prompt with super user privs... I already have set this up for u...@host for root and ssh host for normal users... but root still asks for a password after I set the authorized_keys file in ~root/.ssh.. I have looked at ssh_config(5) but can't tell what option (if any) does this PermitRootLogin is set to 'no' by default in /etc/ssh/sshd_config. It isn't advisable disabling this extra layer of security. Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ssh to root
Aryeh M. Friedman wrote: I need to set up a machine so that I can type ssh [host] as root from some other host and I get a prompt with super user privs... I already have set this up for u...@host for root and ssh host for normal users... but root still asks for a password after I set the authorized_keys file in ~root/.ssh.. I have looked at ssh_config(5) but can't tell what option (if any) does this... if anyone is coruious the final goal here is to set up a sysutils/fusefs-ssh for this host (already installed and working for normal users but want to make it so it is done as root) Don't do it. *never* permit root-level access directly to *any* of your equipment. You want to provide as many levels of escalation to root level as you can, no matter what protocol you are using. Auth in as a normal user (as you stated is already working), and then use sudo(8) to escalate yourself. If you can already ssh [host] as a normal user, then you already have the concept of keys. You can automate the escalation after you've authenticated, and then do what you want to do. Seriously... ...don't do it. Steve ps. # pkg_add -r sudo # rehash # man sudo Then, when/if you have problems with specific functions that need root privileges, ask those questions here instead. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
ssh to root
I need to set up a machine so that I can type ssh [host] as root from some other host and I get a prompt with super user privs... I already have set this up for u...@host for root and ssh host for normal users... but root still asks for a password after I set the authorized_keys file in ~root/.ssh.. I have looked at ssh_config(5) but can't tell what option (if any) does this... if anyone is coruious the final goal here is to set up a sysutils/fusefs-ssh for this host (already installed and working for normal users but want to make it so it is done as root) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Receive email from Exchange 2003
Dear Mr/Ms, I want to build a Internal Email System between a PC with FreeBSD OS and Exchange 2003 (Email Server) Current, I got a Proxy Server (IP:10.20.1.10) within FreeBSD OS. I installed Sendemail Software and Qpopper Software. I tried to send and receive emai, this blow is result: Send Email: From 10.20.1.10 to Email Exchange 2003 System à YES From 10.20.1.10 to 10.20.1.10 à YES Receive Email: From Email Exchange 2003 System to 10.20.1.10 à NO From 10.20.1.10 to 10.20.1.10 à YES Could you please kindly give a Solution for this ? If you have any question, please contact with me. Thank you very much . Regards, VBAC ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
simulating dnsdomain
I have an application that needs to reliably get the fully qualified dns name for the localhost (3rd party app so I don't want to change it unless I have to) currrently it calls dnsdomainname which is in linux is an alias for hostname --fqdn but FreeBSD does not have that option set... how can I simulate this? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: simulating dnsdomain
--On January 21, 2010 12:10:20 AM -0500 Aryeh M. Friedman aryeh.fried...@gmail.com wrote: I have an application that needs to reliably get the fully qualified dns name for the localhost (3rd party app so I don't want to change it unless I have to) currrently it calls dnsdomainname which is in linux is an alias for hostname --fqdn but FreeBSD does not have that option set... how can I simulate this? ln -s /bin/hostname /bin/dnsdomainname Paul Schmehl, If it isn't already obvious, my opinions are my own and not those of my employer. ** WARNING: Check the headers before replying ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Receive email from Exchange 2003
On 1/20/10, Truong Thu Bac v...@foster.com.vn wrote: Dear Mr/Ms, I want to build a Internal Email System between a PC with FreeBSD OS and Exchange 2003 (Email Server) Current, I got a Proxy Server (IP:10.20.1.10) within FreeBSD OS. I installed Sendemail Software and Qpopper Software. I tried to send and receive emai, this blow is result: Send Email: From 10.20.1.10 to Email Exchange 2003 System à YES From 10.20.1.10 to 10.20.1.10 à YES Receive Email: From Email Exchange 2003 System to 10.20.1.10 à NO From 10.20.1.10 to 10.20.1.10 à YES Could you please kindly give a Solution for this ? If you have any question, please contact with me. Thank you very much . Regards, VBAC It's probably due to how Exchange or the Internet at large has MX records in DNS setup. Check that. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Fwd: DSN (was: Re: Receive email from Exchange 2003)
Truong Thu Bac, The DNS/MX to foster.com.vn is possibly misconfigured too, it's blocking mail from gmail. -- Forwarded message -- From: Mail Delivery Subsystem mailer-dae...@googlemail.com Date: Thu, 21 Jan 2010 05:22:38 + Subject: Delivery Status Notification (Failure) To: taj...@gmail.com Delivery to the following recipient failed permanently: v...@foster.com.vn Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Blocked (state 14). - Original message - MIME-Version: 1.0 Received: by 10.115.134.18 with SMTP id l18mr680973wan.128.1264051354525; Wed, 20 Jan 2010 21:22:34 -0800 (PST) In-Reply-To: 00bf01ca9a45$51a26aa0$f4e73f...@com.vn References: 00bf01ca9a45$51a26aa0$f4e73f...@com.vn Date: Wed, 20 Jan 2010 22:22:34 -0700 Message-ID: ade45ae91001202122w6c93cd1fx1acb40b62da32...@mail.gmail.com Subject: Re: Receive email from Exchange 2003 From: Tim Judd taj...@gmail.com To: Truong Thu Bac v...@foster.com.vn Cc: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 1/20/10, Truong Thu Bac v...@foster.com.vn wrote: Dear Mr/Ms, I want to build a Internal Email System between a PC with FreeBSD OS and Exchange 2003 (Email Server) Current, I got a Proxy Server (IP:10.20.1.10) within FreeBSD OS. I installed Sendemail Software and Qpopper Software. I tried to send and receive emai, this blow is result: Send Email: From 10.20.1.10 to Email Exchange 2003 System à YES From 10.20.1.10 to 10.20.1.10 à YES Receive Email: From Email Exchange 2003 System to 10.20.1.10 à NO From 10.20.1.10 to 10.20.1.10 à YES Could you please kindly give a Solution for this ? If you have any question, please contact with me. Thank you very much . Regards, VBAC It's probably due to how Exchange or the Internet at large has MX records in DNS setup. Check that. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
NIS oops
I set up and tested NIS on our new master server then rebooted and it failed to come up... it is not possible for me to get physical access (or anyone else for that matter) until tommorow afternoon... is there any way to use an other machine on the net to kick start it (NFS mount attempts to it also hang) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: NIS oops
is there any way to use an other machine on the net to kick start it Unless you have an account on that master server that is not depending on NIS, I see no way. Bests, Olivier ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: NIS oops
Olivier Nicole wrote: is there any way to use an other machine on the net to kick start it Unless you have an account on that master server that is not depending on NIS, I see no way. Bests, Olivier and thats the one error I made in setting it up likely... (I saw that note after rebooting in the handbook) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
VirtualBox - does it work for FreeBSD?
Good Morning :-) A quick question for anyone running VirtualBox on a FreeBSD _host_ machine, with Linux or Windows as a _guest_ OS. Does it work? That is, do the guest additions work fully for those guests, or are there limitations such those I experience currently when running FreeBSD 8 as the guest? (eg no access to USB, no fullscreen mode). Any major problems with a FreeBSDS host and Windows/Linux guest? atb Glyn ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: High availability SQL server setup
Here's an article about multi-master replication on MySQL: http://onlamp.com/onlamp/2006/04/20/advanced-mysql-replication.html It's not rocket science ;) Ruben On Wed, Jan 20, 2010 at 08:06:15PM -0500, Steve Bertrand typed: Hi all, For some time, I've been considering consolidating all/most of our SQL databases (all MySQL) onto a single dedicated cluster setup. I'm looking for feedback on the best way to do this. All of the options I've considered so far have both their drawbacks and benefits. From what I can tell, there's no one single way to be able to have everything that I want. Off the bat, I haven't found a way to create a cluster that can have more than one host in the cluster writable. My objective would be to start with two very high end boxes. One would sit in my primary location, the other a few blocks away over a gi fibre link. I would want the remote box to pick up immediately if the master server fails. I figure I could achieve this using network trickery for IP failover, CARP or the like and span a couple of vlans across the fibre. I would want each SQL server connected to separate edge routers to ensure both server and network resilience. Each box has two GigE NICs, so off the bat, I'd have each box doing VRRP to two separate edge gear at each location. My concern is, is that I can't envision how both boxes could possibly stay in a continuous state that would allow such fail-over, and fail-back. (fail-back is less of a concern...if it comes to it, I'd rebuild by hand if necessary). I've considered ZFS replication, but there could be several minutes worth of snapshot missing if the primary fails. I already have MySQL replication in many spots, but that's only one write master and read-only slaves. Can you provide any details or new ideas that I'm missing in order to have the holy grail of SQL redundancy? Cheers, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
very low upload speed to any FTP daemons
I've tried pure-ftpd and vsftpd and got very low upload speed (~200kb/s) per a connection. but when I download on the server using wget speed is 2Mb/s on the ftpclient from which I do upload if to increase the param I/O buffer size till 1Mb upload speed increases to ~2Mb/s when I use these ftp demons on the Linux server there is no such kind of problem and I do not need to correct I/O buffer size it seems it is identified automatically on Linux. how should I set up FreeBSD to increase default I/O buffer or identify it automatically for ftp incoming connections. please advise if you are able. thanks a lot! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ssh to root
On Wed, Jan 20, 2010 at 11:09:14PM -0500, Steve Bertrand typed: Aryeh M. Friedman wrote: I need to set up a machine so that I can type ssh [host] as root from some other host and I get a prompt with super user privs... I already have set this up for u...@host for root and ssh host for normal users... but root still asks for a password after I set the authorized_keys file in ~root/.ssh.. I have looked at ssh_config(5) but can't tell what option (if any) does this... if anyone is coruious the final goal here is to set up a sysutils/fusefs-ssh for this host (already installed and working for normal users but want to make it so it is done as root) Don't do it. *never* permit root-level access directly to *any* of your equipment. This is not very helpfull. In a private LAN these security mantras become a lot less obvious. You defend the LAN, not necessarily the individual systems. To Aryen: you might want to set PermitRootLogin to 'without-password' in /etc/ssh/sshd_config. That way, password authentications for root are still disabled and only users from machines with the correct private keys are allowed. Ruben You want to provide as many levels of escalation to root level as you can, no matter what protocol you are using. Auth in as a normal user (as you stated is already working), and then use sudo(8) to escalate yourself. If you can already ssh [host] as a normal user, then you already have the concept of keys. You can automate the escalation after you've authenticated, and then do what you want to do. Seriously... ...don't do it. Steve ps. # pkg_add -r sudo # rehash # man sudo Then, when/if you have problems with specific functions that need root privileges, ask those questions here instead. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
