Building file server for multi-tera capacity
Hi we plan a FreeBSD server which can host at least 20 Terabyte of data. The system will be shipped with FreeBSD 7 or 8 and will be based on a NexSAN SAS Beast. We would like to know if anybody has tried FreeBSD with NexSAN products and particularly if he has a suggestion about a solid HBA. Also we would like to hear your opinion about ZFS with this configuration. Greetings Valerio Daelli --- Il tuo 5 X mille a favore della Ricerca della Fondazione IFOM Tutti coloro che presentano il modello Unico, il modello 730 o che ricevono dal proprio datore di lavoro il modello CUD, hanno la facoltà di scegliere la destinazione del proprio 5 X mille. Nella casella riservata al Finanziamento agli Enti della Ricerca Sanitaria inserisci il codice fiscale di IFOM (97358780159) e apponi la tua firma. Il tuo 5 X mille verrà destinato alla Ricerca contro il Cancro della Fondazione IFOM Per saperne di più vai al sito IFOM. http://www.ifom-firc.it/5x1000.php Segnala questa opportunità ai tuoi amici e al tuo commercialista --- Valerio Daelli Email valerio.dae...@ifom-ieo-campus.it Phone +39 02 574303006 c/o IFOM-IEO campus, building 1 -Via Adamello 16 - 20139 Milan Italy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Port of perl 5.10
Hi is there anyone working on a port of perl5.10? I can only see ports of 5.8 and 5.6. I can make a port of 5.10, it seems to compile flawlessly on FreeBSD 7. Have a good day Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Questions about coretemp
On Fri, Aug 8, 2008 at 10:35 PM, [EMAIL PROTECTED] wrote: have you checked your device.hints? Also there is the cpuid port which may help you identify if your CPU is supported. Valerio Daelli I'm not sure what I would be looking for in device.hints. Below is the output of cpuid. Perhaps Xeons are not supported by coretemp? :: eax ineax ebx ecx edx 0005 756e6547 6c65746e 49656e69 0001 0f4a 01020800 641d bfebfbff 0002 605b5001 007d7040 0003 0004 4121 01c0003f 001f 0005 0040 0040 8000 8008 8001 0001 2010 8002 20202020 20202020 20202020 20202020 8003 6e492020 286c6574 58202952 286e6f65 8004 20294d54 20555043 30302e33 007a4847 8005 8006 08006040 8007 8008 3024 Vendor ID: GenuineIntel; CPUID level 5 Intel-specific functions: Version 0f4a: Type 0 - Original OEM Family 15 - Pentium 4 Extended family 0 Model 4 - Intel Pentium 4 processor (generic) or newer Stepping 10 Reserved 0 Extended brand string: Intel(R) Xeon(TM) CPU 3.00GHz CLFLUSH instruction cache line size: 8 Initial APIC ID: 1 Hyper threading siblings: 2 Feature flags: bfebfbff: FPUFloating Point Unit VMEVirtual 8086 Mode Enhancements DE Debugging Extensions PSEPage Size Extensions TSCTime Stamp Counter MSRModel Specific Registers PAEPhysical Address Extension MCEMachine Check Exception CX8COMPXCHG8B Instruction APIC On-chip Advanced Programmable Interrupt Controller present and enabled SEPFast System Call MTRR Memory Type Range Registers PGEPTE Global Flag MCAMachine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table PSE-36 36-bit Page Size Extension CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMXMMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSEStreaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop HT Hyper Threading TM Thermal monitor 31 reserved Feature flags set 2: 641d: SSE3SSE3 extensions 2 - unknown feature MONITOR MONITOR/MWAIT instructions DS-CPL CPL Qualified Debug Store CID Context ID CX16CMPXCHG16B xTPRSend Task Priority messages Extended feature flags: 2010: XD-bitExecution Disable bit EM64T Intel Extended Memory 64 Technology Extended feature flags set 2: 0001: 0 - unknown feature TLB and cache info: 50: Instruction TLB: 4KB and 2MB or 4MB pages, 64 entries 5b: Data TLB: 4KB and 4MB pages, fully assoc., 64 entries 60: 1st-level data cache: 16-KB, 8-way set associative, sectored cache, 64-byte line size 40: No 2nd-level cache, or if 2nd-level cache exists, no 3rd-level cache 70: Trace cache: 12K-micro-op, 4-way set assoc 7d: 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size Processor serial: -0F4A---- Only CPU with CPUID = 6 seems supported. I found this link useful http://www.intel.com/software/products/documentation/vlin/mergedprojects/analyzer_ec/mergedprojects/reference_olh/mergedprojects/instructions/instruct32_hh/vc46.htm Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Vsftpd rotate logs with newsyslog...
Well, i take this opportunity also to ask about Apache toowhich signal should i send? A HUP signal should work for apache. For Apache you may find useful rotatelogs. It should come with port. Bye Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Is FreeBSD suitable for my thinkpad T61 ?
On Thu, Jun 12, 2008 at 10:40 AM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Jerry McAllister wrote: On Wed, Jun 11, 2008 at 08:50:36PM +0800, [EMAIL PROTECTED] wrote: Hi all, I brought a new ThinkPad T61 for work, the hardware is as follows: T7300(2GHz), 2GB RAM, 120GB 5400rpm HD, 15.4in 1680x1050 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn(n-disabled), Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Intel Turbo, 9c Li-Ion, My current working involves scientific calculation and programming. I'm from a linux background(redhat, debian, ubuntu), but after some googling and comparison, I found FreeBSD more stable and I want to try FreeBSD. I am tired of a dual-boot system, so I want to just install FreeBSD or another linux distribution(maybe ubuntu) on my notebook. My questions are: 1) Can FreeBSD work well with my hardware? The display card, CDRW/DVDRW, wireless, Ethernet and battery managment are the most important. 2) I have read the FreeBSD Handbook. According to Chapter 10: Linux Binary Compatibility, it seems that FreeBSD lacks support of many commercial softwares such as MATLAB, Oracle, Mathematica. Is the linux binary compatibility stable enough for work ? It should run FreeBSD just fine. Check the hardware compatibility lists to check for specific peripherals. The Linux compatibility layer worked well. Should be no problem. jerry Thanks a lot. Thank you guys. I will try to install FreeBSD on a second hard disk to have a test. Is FreeBSD going to enhance himself on the desktop ? It seems that FreeBSD focuses mainly on server, while Linux has improved a lot in the past a few years both on server and desktop. But I'm still eager to try FreeBSD on my notebook :P I am able to compile world and kernel and the temperature of the cores is never higher than 67. I find it stable. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: chmod operation on directories / files
Try with find -type d -exec chmod 755 {} \; find -type f -exec chmod 644 {} \; Bye Valerio Daelli On Wed, May 7, 2008 at 1:56 PM, Zbigniew Szalbot [EMAIL PROTECTED] wrote: Hello, How do I chmod separately files and directories? If I use chmod -R 644 then it will go through all the subdirectories assigning everything 644 permissions, directories including. Many thanks! -- Zbigniew Szalbot www.lc-words.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Kernel panic on Acer TravelMate 2500
: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: OHCI (generic) USB controller on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: ATI SB200 USB 2.0 controller mem 0xd8003000-0xd8003fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: ATI SB200 USB 2.0 controller on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 on usb2 uhub2: 6 ports with 6 removable, self powered pci0: serial bus, SMBus at device 20.0 (no driver attached) atapci0: ATI IXP200 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8070-0x807f at device 20.1 on pci0 ata0: ATA channel 0 on atapci0 ata0: [ITHREAD] ata1: ATA channel 1 on atapci0 ata1: [ITHREAD] isab0: PCI-ISA bridge at device 20.3 on pci0 isa0: ISA bus on isab0 pcib2: ACPI PCI-PCI bridge at device 20.4 on pci0 pci2: ACPI PCI bus on pcib2 cbb0: TI1520 PCI-CardBus Bridge at device 4.0 on pci2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 cbb0: [ITHREAD] cbb1: TI1520 PCI-CardBus Bridge at device 4.1 on pci2 cardbus1: CardBus bus on cbb1 pccard1: 16-bit PCCard bus on cbb1 cbb1: [ITHREAD] rl0: RealTek 8139 10/100BaseTX port 0xa000-0xa0ff mem 0xd820-0xd82000ff irq 16 at device 10.0 on pci2 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0a:e4:53:a7:98 rl0: [ITHREAD] pcm0: ATI IXP 200 mem 0xd8004400-0xd80044ff irq 17 at device 20.5 on pci0 pcm0: [ITHREAD] pci0: simple comms, generic modem at device 20.6 (no driver attached) acpi_tz0: Thermal Zone on acpi0 acpi_tz1: Thermal Zone on acpi0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: ISA Option ROMs at iomem 0xc-0xcefff,0xdc000-0xd pnpid ORM on isa0 fdc0: Enhanced floppy controller at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FILTER] ppc0: parallel port not found. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounter TSC frequency 2800111428 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ZFS WARNING: Recommended minimum RAM size is 512MB; expect unstable behavior. ZFS filesystem version 6 ZFS storage pool version 6 ad0: 38154MB Seagate ST94019A 3.05 at ata0-master UDMA100 acd0: CDRW QSI CD-RW/DVD-ROM SBW242C/UQ81 at ata1-master UDMA33 pcm0: Avance Logic ALC655 AC97 Codec GEOM_LABEL: Label for provider acd0 is iso9660/GLENNGOULD3. Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted Loading configuration files. kernel dumps on /dev/ad0s1b If you want me to investigate more please let me know. Thanks for your help Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Bad performance of 7.0 nfs client with Solaris nfs server
Hi list we have a FreeBSD 7.0 NFS client (csup today, built world and kernel). It mounts a Solaris 10 NFS share. We have bad performance with 7.0 (3MB/s). We have tried both UDP and TCP mounts, both sync and async. This is our mount: nest.xx.xx:/data/export/hosts/bsd7.xx.xx/ /mnt/nest.xx.xx nfs noatime,async,-i,rw,-T,-3 Both our server (7.0 and Solaris 10) are Gigabit Ethernet, both are HP Proliant DL360 i386 (NIC bge0): --- FreeBSD 7.0: [EMAIL PROTECTED] ~]$ uname -a FreeBSD bsd7.xx.xx 7.0-RC2 FreeBSD 7.0-RC2 #1: Mon Feb 18 17:46:46 CET 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BSD7 i386 --- This is our performance with iozone: command line: iozone -+q 1 -i 0 -i 1 -n 2048 -g 2G -Raceb iozone.xls -f /mnt/nest.xx.xx/iozone.bsd7/iozone.tmp FreeBSD 7: File stride size set to 17 * record size. random randombkwd record stride KB reclen write rewritereadrereadread writeread rewriteread fwrite frewrite fread freread 20481024 109883 101289 769058 779880 2048204838123674 760479 767066 40961024 56 106788 724692 728040 4096204833362241 157132 733417 4096409628293364 699351 699807 As you can see, while with record length less than 1024KB the speed is 'fast', with record of 2048 or more (I've tried with record much bigger) we get only 3 MB/s. Is this a known issue? If you need more details please contact me, I am willing to do more tests to risolve this problem. Thanks Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
nfsv4: strange things happen
Hi we have a Solaris 10 NFS server and a FreebSD 7.0 NFS client. We have a couple of NFSv4 mounted filesystem on the client. nest.ifom-ieo-campus.it:/data/exports/obj/bsd7.ifom-ieo-campus.it/obj /mnt/nest nfs rw,-r=16384,-w=16384,tcp,-4 2 0 nest.ifom-ieo-campus.it:/data/exports/jails/bsd7.ifom-ieo-campus.it/jails /jails nfs rw,-r=16384,-w=16384,tcp,-4 2 0 We are having strange issues: for example - we cannot execute binaries on the mounted filesystems - if we umount one of the two filesystem from the client, the other filesystem must be remounted, otherwise a process the is writing on it exit with errors. For example we have a iozone running on /mnt/nest and we umount /jails, the iozoine exits with: Can not open temp file: iozone.tmp open: Unknown error: 10011 [EMAIL PROTECTED]:/mnt/nest/iozone/nfs4 Is anybody using nfsv4 between a Solaris 10 server and a FreebSD 7.0 client? Are you having problems on it? This is our FreeBSD version: [EMAIL PROTECTED]:~ uname -a FreeBSD bsd7.ifom-ieo-campus.it 7.0-RC1 FreeBSD 7.0-RC1 #0: Fri Jan 11 19:22:50 CET 2008 [EMAIL PROTECTED]:/mnt/nest/usr/src/sys/BSD7 i386 (everything si running fine on nfsv3). Bye and thanks for your help Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Question about a patch
Just send in the 'diff -Nur' output, but make a note in your PR that the filename has been changed. The committer will be able to make it all right in CVS. Thanks a lot for your help. Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Question about a patch
Hi I am about to send a patch about a port. I would like to move a file of the port, located in the 'files/' directory. Basically the file now is called netdisco.sh.in and I would like to call it netdisco.in. If I use a normal 'diff -ruN' command to generate the patch, after I apply the patch the new file is created but the old file (netdisco.sh.in) is still there, with zero size. I wonder if I should generate a shar archive for this port instead of a patch. Sorry if this question is so simple. Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: fsck of big disk
Hi, thanks a lot for your answer. we have a freshly installed FreeBSD 6.2 machine with a gstriped external disk, of 5.3Tb. The disk is composed of two slices of 2.6 Tb. We are trying to have a (background) fsck of it but few hours later since the start of the check the host get unresponsive: it responds to ping but it doesn't let login anyone, nor by ssh nor by console. What do you get if you press Control-T on the console when it is unresponsive? We are not able to login via console nor via ssh. Pheraps you suggest me to press Control-T on the console even if I am not logged on. I did not try, sorry. When you do a background fsck there is a point at which a snapshot of the filesystem is taken, although I'd say that happens at the beginning of the check. The problem is that with 5.3 Tb, it may take quite a while to take the snapshot, and during that time the system blocks any process that tries to write to the filesystem. Maybe that's what you are experiencing. What you explained us sounds very interesting. But anyway we simply solved by disabling background fsck on such a big partition. We had panics and reboot and we did not want to risk on a production host. Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
fsck of big disk
Hi list we have a freshly installed FreeBSD 6.2 machine with a gstriped external disk, of 5.3Tb. The disk is composed of two slices of 2.6 Tb. We are trying to have a (background) fsck of it but few hours later since the start of the check the host get unresponsive: it responds to ping but it doesn't let login anyone, nor by ssh nor by console. In the meanwhile we are having a large rsync from another host. Tonight during the fsck/rsync we had a reboot, without special messages on the console. We have 1Gb of RAM on this server. Is 1Gb too small as memory to have a fsck and a rsync on a server with 5.3Gb as external disk? Thanks for your precious help Valerio Daelli Server: i386 - HP DL360 CPU pentium4 1Gb RAM HBA: LSI Logic 929 External disk: Apple XRAID with upgraded firmware ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Need help with backup shell script
On Nov 21, 2007 2:39 PM, Andreas Widerøe Andersen [EMAIL PROTECTED] wrote: Hi, I'm working on a shell script that will let me attach (mount) an external USB 2.0 harddrive and to my FreeBSD 6.2 server and perform a full backup of /backup on my server (all files and subfolders) once or twice a week (whenever I run the cronjob). The script must be able to run through a cronjob and the drive must be mounted and unmounted after each job (I will swap between two drives of the same type and size). The script must also remove folders/files older than 30 days. Does anyone use a script like this today that they can share? I'm not a shell scripter myself so any help is highly appreciated. Here's my rough idea/sketch: #! /bin/sh $MOUNT = /external $DATE= date_today mount usb_drive $MOUNT cd /$MOUNT rm all files forlders older than 30 days mkdir /$DATE cp -fr /backup to /$MOUNT/$DATE cd unmount --- #!/bin/sh MOUNT=/external DATE=`date +%Y%m%d%H%M` mount /dev/da2 $MOUNT #Change device name find $MOUNT -mtime +30 -delete mkdir $MOUNT/$DATE cp -rp /backup/* $MOUNT/$DATE umount /external --- Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Need help with backup shell script
--- #!/bin/sh MOUNT=/external DATE=`date +%Y%m%d%H%M` mount /dev/da2 $MOUNT #Change device name find $MOUNT -mtime +30 -delete mkdir $MOUNT/$DATE cp -rp /backup/* $MOUNT/$DATE umount /external --- Please substitute the line starting with 'cp' with this one: rsync -rlpgoD /backup/ $MOUNT/$DATE (you must portinstall rsync as well) since 'cp -rp' preserve modification times as well while 'rsync -rlpgoD' preserve permission but not mtime. Sorry Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[OT] Rotate logs for openbgpd
Hi we use openbgpd-4.0 from ports. We would like to rotate its logs with newsyslog but if we send the daemon the HUP or USR1 signal it does not close its old, already-rotated log file. Does anyone by accident know the correct signal to get openbgpd close its old log file? Maybe we should use 'bgpctl reload'? Many thanks for your help Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
repquota strange behaviour
Hi list we have a couple of fileservers (FreeBSD 5.4 and 6.2) with pam_ldap and nss_ldap. They get the users from our openldap server. Suddendly when we run repquota we have a lot of usernames which are not translated: they are shown as numeric userid. About half of the usernames are displayed correctly and half are displayed only as userid: #repquota -u /data/exports/Users ... sburgare -- 10 2097152 2097152 -5 100 100 - smurr-- 724008 2097152 2097152 - 1181 100 100 - giotti -- 1706432 2097152 2097152 - 3646 100 100 - dpenkov -- 658 2097152 2097152 - 22 100 100 - pmassa -- 200640 2097152 2097152 - 976 100 100 - ... 3440 -- 1271682 2097152 2097152 - 2570 100 100 - 3441 -- 381056 2097152 2097152 - 418 100 100 - 3442 -- 182236 2097152 2097152 - 227 100 100 - 3443 -- 314658 2097152 2097152 - 585 100 100 - This is our nss_ldap.conf: --- uri ldap://ldap1.XXX base dc=ifom-ieo-campus,dc=it binddn uid=pam,ou=Services,ou=Accounts,dc=XXX,dc=XXX bindpw XXX bind_policy soft pam_password SSHA scope sub nss_base_passwd ou=Users,ou=People,ou=Accounts,dc=XXX,dc=XXX --- if we query the openldap server for those userids, we get the correct usernames: # ldapsearch -LLL -h ldap1.XXX -b 'dc=XXX,dc=XXX' '(uidNumber=3440)' uid dn: uid=lverhoef,ou=ifom,ou=Users,ou=People,ou=Accounts,dc=XXX,dc= XXX uid: lverhoef id works as usual: # id lverhoef uid=3440(lverhoef) gid=951(CAMPUS) and the command quota works as usual: # quota lverhoef Disk quotas for user lverhoef (uid 3440): Filesystem usage quota limit grace files quota limit grace /data/exports/Users 1271682 2097152 20971522570 100 100 Any clue? Thanks a lot! Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Monitoring tool for Compaq Smart Array 5300
Hi we would like to monitor the status of a Compaq Smart Array 5300 installed on a HP Proliant DL360. Is there any tool for FreeBSD 6.2? Thanks for the help Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Fwd: top(1) STATE column
They're only documented in the source, as far as I know. A quick grep comes up with around 300 different unique waits and mutexes in the kernel: Try searching this mail from freebsd-questions: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=1251488+0+archive/2006/freebsd-questions/20060618.freebsd-questions the subject says it all Hope it helps Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error in man page of sendmsg?
Hi working with InterMapper (a network tool) on FreeBSD 5.4 I got a sendmsg -1 errno 22 Invalid argument I looked in man sendmsg in the errors but I found no EINVAL in the errors. So I looked at the kernel sources and I found -- static int sendit(td, s, mp, flags) register struct thread *td; int s; register struct msghdr *mp; int flags; { struct mbuf *control; struct sockaddr *to; int error; if (mp-msg_name != NULL) { error = getsockaddr(to, mp-msg_name, mp-msg_namelen); if (error) { to = NULL; goto bad; } mp-msg_name = to; } else { to = NULL; } if (mp-msg_control) { if (mp-msg_controllen sizeof(struct cmsghdr) #ifdef COMPAT_OLDSOCK mp-msg_flags != MSG_COMPAT #endif ) { error = EINVAL; -- that error is set to EINVAL so the man page should report EINVAL as possible error in this funcion. Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: changing kern.ngroups
Cool. Any suggestion on what to do if I do want to change it? We managed to get 64 groups changing these files /usr/include/sys/syslimits.h /usr/src/sys/sys/syslimits.h NGROUPS_MAX from 16 to 64, then recompiling world. We use NFS and we never had problems (more than one year running). But I heard you may get some trouble with some hardcoded limits. Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
make installworld fails on amd64
Hi I am trying to make a installworld on amd64 and I get the following result: --- cc -Os -fno-guess-branch-probability -fomit-frame-pointer -fno-unit-at-a-time -mno-align-long-strings -mrtd -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -DUFS1_AND_UFS2 -DFLAGS=0x80 -DSIOPRT=0x3f8 -DSIOFMT=0x3 -DSIOSPD=9600 -I/usr/src/sys/boot/i386/boot2/../../common -I/usr/src/sys/boot/i386/boot2/../btx/lib -I. -Wall -Waggregate-return -Wbad-function-cast -Wcast-align -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wshadow -Wstrict-prototypes -Wwrite-strings -ffreestanding -mpreferred-stack-boundary=2 -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -m32 -S -o boot2.s.tmp /usr/src/sys/boot/i386/boot2/boot2.c sed -e '/align/d' -e '/nop/d' boot2.s.tmp boot2.s rm -f boot2.s.tmp as --32 -o boot2.o boot2.s ld -static -N --gc-sections -nostdlib -m elf_i386_fbsd -Ttext 0x2000 -o boot2.out /usr/obj/usr/src/sys/boot/i386/boot2/../btx/lib/crt0.o boot2.o sio.o objcopy -S -O binary boot2.out boot2.bin btxld -v -E 0x2000 -f bin -b /usr/obj/usr/src/sys/boot/i386/boot2/../btx/btx/btx -l boot2.ldr -o boot2.ld -P 1 boot2.bin btxld:No such file or directory *** Error code 1 Stop in /usr/src/sys/boot/i386/boot2. *** Error code 1 Stop in /usr/src/sys/boot/i386. *** Error code 1 Stop in /usr/src/sys/boot. *** Error code 1 Stop in /usr/src/sys. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. --- I did a cvsup this morning --- *default host=cvsup.fi.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=RELENG_6_1 *default delete use-rel-suffix *default compress src-all --- Anyone any idea? Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make installworld fails on amd64
I corrected /etc/make.conf, I changed CPUTYPE?=opteron to CPUTYPE=opteron and now everything is fixed. Sorry Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Question on NFS performance
Hi all we have a FreeBSD 5.4 exporting some NFS filesystem to a cluster of gentoo boxes (kernel 2.6.12). Our exported storage disk is an Apple XRaid. We have Gigabit Ethernet both on the client and the server. We would like to improve our read performance. This is our performance: about 10Mb reading a file of 1Gb with dd and iozone confirms this result. We already use the normal optimization flags (we use rpc.lockd and rpc.statd, on the client we have read size 65536 and a read ahead of 4 blocks, the async options). Is our performance the best we can get? Can we improve it? Thanks for your help Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Hang in 5.3, related to syslog-ng
Hi all we have a server with 5.3 (latest patches) with twelve jails. One of these jails is a mail server (mail-jail), serving about 300 users, writing a lot of logs to /var/log/maillog. On the same server I installed a jail with syslog-ng (syslog-jail). syslog-ng was configured to listen on the network and write to a named pipe. On the same jail I created a script to read from that named pipe and insert the result to mysql, but I didn't start this script. I was about to start this system of logging, so I modified /etc/syslog.conf in the mail-jail inserting a line like this: mail.* @logger_with_syslog-ng.my.domain then I restarted syslogd on the mail-jail sending a HUP signal. Suddendly the system stopped responding to anything (from ping to console, everything stopped). I rebooted the server turning off the power and deleted that line in syslog.conf. Everything worked. Could it be some issue related to a named pipe? Or pheraps to syslogd? Or syslog-ng? I tried recreating the situation on a test server with 5.4 but everything worked. Sorry if I don't have details but this is a very critical server for us and I can't experiment. Thanks Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Samba on amd64 6.0
Anyone using this with LDAP backend? Does it work for you? To me it's giving severe troubles: smbd will tend to hang, hog CPU to 99% and keep some file locked, the user was modifing. I'll need to kill -9 it, in order to let the user keep on working. If anyone is having or has had this problem, I'd welcome any information or experience. I've seen past reports on this (dating back to autumn 2005), but the thread does not end with anything that can help. bye Thanks av. We had the same problem as you, with FreeBSD 5.4, last November. We solved migrating to i386 (which worked stable for months). Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Number of routing tables
Hello I would like to know if exists a sysctl to get the number of routing tables in the kernel. I don't want the list of the routing tables, I just want the number. The command 'netstat -rn|wc -l' could be a good candidate, but since I want to implement this command on a very busy router, I don't want it to go 100% CPU just to get a simple count. If it doesn't exist I will create something based on netstat's source. Thanks a million (routes) Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD on Sun Fire V20Z
We use it since last August without problem. We have FreeBSD 5.4 for amd64 and it works great. Bye Valerio Daelli On 2/23/06, Paul Schmehl [EMAIL PROTECTED] wrote: Has anyone installed 6.0 RELEASE on this hardware? I can't even get it to boot off the CD, but it boots fine off the Sun-supplied setup CD (which only offers RHE and Suse as options.) I've d/l'd both discs 1 2 and the bootonly ISOs and burned them to CD (like I usually do), but they do not boot. (Yes, I'm using the amd64 version.) Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD-6 + Jail + MultipleIP
I think somebody already spoke about that in this mailing list, anyway take a look at http://garage.freebsd.pl/ Bye Valerio Daelli On 2/16/06, mr sicon [EMAIL PROTECTED] wrote: Anyone have a patch or know if and when it will be implemented into the base jail system? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Group membership above 15 of them
On 12/21/05, Feczak Szabolcs [EMAIL PROTECTED] wrote: Hi, I would like to have users with more than 15 groups. The default kern.ngroups: is 16 by default and readonly, and not even /etc/sysctl.conf allows to modify it after reboot, although securelevel is -1. I read somewhere that I need the modify the source and rebuild world for this. If I put myself into more than 15 groups I cannot login anymore and only sshd[52178]: initgroups(username,100): Invalid argument message in the syslog warns me about this - I think more warnings needed at some other point since you can easily lock out yourself from a remote system. So what steps should I take to let this configuration work. Isn't there an easier way then rebuild wolrd ? We have a configuration with 64 groups and it is pretty stable. We modified the sources: /usr/include/sys/syslimits.h /usr/src/sys/sys/syslimits.h and put the NGROUPS_MAX to 64. Then we rebuilt everything and now it just works. Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: db_dump185 Utility?
On 12/20/05, Drew Tomlinson [EMAIL PROTECTED] wrote: I suspect I have a corrupted bayes token database for SpamAssassin. 'file' says it's a Berkeley DB 1.85 hash file. I googled for ways to repair it and came across many references to a man page for the db_dump utility. I don't seem to have this on my system. The man page states that db_dump is not always built when the libraries are installed and I should see my system administrator for further information. Since I am the sys admin for this box and don't have any further information, I'm hoping some one else does. How can I build and install this utility and the corresponding db_load? I'm clueless. Thanks, Drew -- Visit The Alchemist's Warehouse Magic Tricks, DVDs, Videos, Books, More! http://www.alchemistswarehouse.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] You could try to install the db42 port. It contains these kinds of utility: /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_archive.html /var/db/pkg/db42- 4.2.52_4/+CONTENTS:share/doc/db42/utility/db_checkpoint.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_deadlock.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_dump.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_load.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_printlog.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_recover.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_stat.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_upgrade.html /var/db/pkg/db42-4.2.52_4/+CONTENTS:share/doc/db42/utility/db_verify.html Greetings Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Installing mysql 5 with linuxthreads from ports
Hi I have problem installing mysql 50 on FreeBSD 5.4. I am trying to install it with linuxthreads and I keep getting these errors: $ cd /usr/ports/databases/mysql50-server $ make -DWITH_LINUXTHREADS -DDATA_DIR=/data/mysql CONFIGURE_ARGS=--without-debug --without-readline \ --without-libedit --without-bench --without-extra-tools \ --with-libwrap --with-mysqlfs --with-vio --with-low-memory \ --enable-thread-safe-client --enable-assembler --without-berkeley-db \ --with-named-thread-libs=-pthread --prefix=/usr/local install . if c++ -DMYSQL_SERVER -DDEFAULT_MYSQL_HOME=\/usr/local\ -DDATADIR=\/data/mysql\ -DSHAREDIR=\/usr/local/share/mysql\ -DHAVE_CONFIG_H -I. -I. -I.. -I../innobase/include -I../include -I../include -I../regex -I.-DDBUG_OFF -O -pipe -D__USE_UNIX98 -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads -O -pipe -D__USE_UNIX98 -D_REENTRANT -D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads -felide-constructors -fno-rtti -fno-exceptions -fno-implicit-templates -fno-exceptions -fno-rtti -DMYSQLD_NET_RETRY_COUNT=100 -MT mysqld.o -MD -MP -MF .deps/mysqld.Tpo -c -o mysqld.o mysqld.cc; then mv -f .deps/mysqld.Tpo .deps/mysqld.Po; else rm -f .deps/mysqld.Tpo; exit 1; fi mysqld.cc: In function `int main(int, char**)': mysqld.cc:3266: error: `pthread_setprio' undeclared (first use this function) mysqld.cc:3266: error: (Each undeclared identifier is reported only once for each function it appears in.) *** Error code 1 Stop in /usr/ports/databases/mysql50-server/work/mysql-5.0.16/sql. *** Error code 1 I found the definition of the function pthread_setprio in /usr/local/include/mysql/my_pthread.h. Does anybody how to fix this error? Thanks Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
NFS over TCP on 5.4: client stucks
Hello everybody I am trying to mount via NFS a directory exported from FreeBSD 5.4 on a FreeBSD 5.4. The server has these settings: nfs_server_enable=YES # This host is an NFS server (or NO). nfs_server_flags=-u -t -n 8 # Flags to nfsd (if enabled). nfs_reserved_port_only=YES # Provide NFS only on secure port (or NO). nfs_bufpackets=8 # bufspace (in packets) for client mountd_enable=YES # Run mountd (or NO). rpcbind_enable=YES # Run the portmapper service (YES/NO). rpcbind_program=/usr/sbin/rpcbind # path to rpcbind, if you want a different one. rpc_lockd_enable=YES # Run NFS rpc.lockd needed for client/server. rpc_statd_enable=YES and the client has these: nfs_client_enable=YES nfs_access_cache=30 nfs_bufpackets=8 rpc_lockd_enable=YES rpc_statd_enable=YES rpcbind_enable=YES The client can mount the server via UDP, but not via TCP, it just stucks. This is an extract from a tcpdump on the server 15:48:33.516995 IP client.991 server.sunrpc: UDP, length: 56 15:48:33.517159 IP server.sunrpc client.991: UDP, length: 28 15:48:33.518029 IP client.896 server.nfsd: S 2110009721:2110009721(0) win 65535 mss 1460,nop,nop,sackOK,nop,wscale 1,nop,nop,timestamp 190860 0 15:48:33.518060 IP server.nfsd client.896: S 3833266037:3833266037(0) ack 2110009722 win 65535 mss 1460,nop,wscale 1,nop,nop,timestamp 84789431 190860,nop,nop,sackOK 15:48:33.518458 IP client.896 server.nfsd: . ack 1 win 33304 nop,nop,timestamp 190861 84789431 15:48:33.519193 IP client.1365672366 server.nfs: 44 null 15:48:33.519230 IP server.nfs client.1365672366: reply ok 28 null 15:48:33.519630 IP client.896 server.nfsd: F 45:45(0) ack 29 win 33304 nop,nop,timestamp 190862 84789431 15:48:33.519649 IP server.nfsd client.896: . ack 46 win 32745 nop,nop,timestamp 84789431 190862 15:48:33.519668 IP server.nfsd client.896: F 29:29(0) ack 46 win 32745 nop,nop,timestamp 84789431 190862 15:48:33.519924 IP client.896 server.nfsd: . ack 30 win 33303 nop,nop,timestamp 190862 84789431 15:48:33.520366 IP client.device server.sunrpc: UDP, length: 56 15:48:33.520469 IP server.sunrpc client.device: UDP, length: 28 15:48:33.539400 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK,nop,wscale 1,nop,nop,timestamp 190882 0 15:48:36.538776 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK,nop,wscale 1,nop,nop,timestamp 193954 0 15:48:39.737960 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK,nop,wscale 1,nop,nop,timestamp 197230 0 15:48:42.937178 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK 15:48:46.136461 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK 15:48:49.335703 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK 15:48:55.534778 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK 15:49:07.733942 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK 15:49:31.933007 IP client.683 server.nfsd: S 3682544280:3682544280(0) win 65535 mss 1460,nop,nop,sackOK Could anyone please help me? Thank you Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
umapfs file system
Hi all do you think is possible to compile cleanly and to use the umapfs file system? I tried but I got this error: cc -c -O -pipe -mcpu=ev67 -mieee -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -std=c99 -nostdinc -I- -I. -I../../.. -I../../../contrib/dev/acpica -I../../../contrib/altq -I../../../contrib/ipfilter -I../../../contrib/pf -I../../../contrib/dev/ath -I../../../contrib/dev/ath/freebsd -I../../../contrib/ngatm -D_KERNEL -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000 -mno-fp-regs -ffixed-8 -Wa,-mev6 -ffreestanding -Werror ../../../fs/umapfs/umap_vfsops.c ../../../fs/umapfs/umap_vfsops.c: In function `umapfs_omount': ../../../fs/umapfs/umap_vfsops.c:78: error: argument ndp doesn't match prototype ../../../fs/umapfs/umap_vfsops.c:56: error: prototype declaration ../../../fs/umapfs/umap_vfsops.c:78: error: number of arguments doesn't match prototype ../../../fs/umapfs/umap_vfsops.c:56: error: prototype declaration ../../../fs/umapfs/umap_vfsops.c: In function `umapfs_root': ../../../fs/umapfs/umap_vfsops.c:300: error: 'td' redeclared as different kind of symbol ../../../fs/umapfs/umap_vfsops.c:298: error: previous definition of 'td' was here *** Error code 1 Do you think is still supported? Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
NFS export problem
Hello I am trying to export two directories via NFS. The two directories are on the same filesystem. This is our /etc/exports file: /raid/lower/data -maproot=root -network 10.210.0.0 http://10.210.0.0 -mask 255.255.0.0 http://255.255.0.0 /raid/lower/home -maproot=nobody -network 10.210.0.0 http://10.210.0.0-mask 255.255.0.0 http://255.255.0.0 /raid/upper/db -maproot=root -network 10.210.0.0 http://10.210.0.0 -mask 255.255.0.0 http://255.255.0.0 /raid/upper/scratch -maproot=root -network 10.210.0.0 http://10.210.0.0-mask 255.255.0.0 http://255.255.0.0 but we keep getting this strange errors in /var/log/messages: Sep 29 17:38:46 biopresto mountd[411]: can't change attributes for /raid/lower/home Sep 29 17:38:46 biopresto mountd[411]: bad exports list line /raid/lower/home -maproot Sep 29 17:38:46 biopresto mountd[411]: can't change attributes for /raid/upper/scratch Sep 29 17:38:46 biopresto mountd[411]: bad exports list line /raid/upper/scratch -maproot We heard that there could be some problems sharing two directories on the same filesystem. Is this true? Thanks Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Volume managers
Hello we have an Apple XRAID disk and we would like to use it as a single disk, joining its two disks of 2.5T each in order to get a single volume of 5T. We are experiencing problems with vinum, we keep getting kernel panic and we heard the vinum code is not very stable with 5.4. Is there any other stable volume manager for freebsd we could try? Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
bsdlabel and c partition
Hi I have partitioned a disk using bsdlabel and I have used the c partition for the entire disk. According to the manual this mean I have used the disk in dedicated mode. Is there any danger in it? Is it preferable to use another partition? Thanks a lot. Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
fdisk maximum partition size
Hi all does anyone know any maximum limit to the slice size in freebsd? We would like to create a filesystem of 2.2T. Is there any limit in fdisk and bsdlabel? Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD mount_null
Hello all I would like to use freebsd mount_null features and I've tried with some 2001 sources. But we didn't succedeed in installing it from sources since it complaints about some functions missing: mount_null.o(.text+0x10a): In function `main': : undefined reference to `vfsisloadable' mount_null.o(.text+0x11e): In function `main': : undefined reference to `vfsload' mount_null.o(.text+0x139): In function `main': : undefined reference to `endvfsent' Any help is really appreciated. Bye Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Grub not working
Hello I am trying to install grub as a boot loader on my disk. I installed it from ports. When I try to install it on the MBR I get the error Running install /boot/grub/stage1 (hd0) /boot/grub/stage2 p /boot/grub/menu.l st ... failed Error 29: Disk write error I tried to install it with 'grub-install '(hd0)'' and with grub - root (hd0,a) - setup (hd0). I tried deinstalling the port and installing from sources (version 0.97). I don't think the problem is with menu.lst since I am using it with linux (identical file) and it works. Anyone a guess? Thanks Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
PAM debug
Hello we are having problems with PAM authenticating users on LDAP. We have FreeBSD 5.3. We would like to switch debugging. If we put this line in /etc/pam.d/login authsufficient pam_ldap.sodebug try_first_pass nothing happens. This is our nss_ldap.conf -- uri ldap://127.0.0.1/ base dc=ifom-ieo-campus,dc=it binddn uid=MYID,dc=MYDOMAIN bindpw MYPASSWD pam_password SSHA scope sub logdir /var/log debug 9 -- Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
fdisk problem
Hello everybody we have a 2235Gb disk which we want to partition. If we use sysinstall-Configure-Fdisk and try to build a unique slice we get a message like 'Wrote FDISK partition information out successfully (100%)' but if we go back to fdisk it shows a freebsd slice of 187Gb plus an unused slice of 2048Gb. If we delete it and recreate a new slice, the problem persists. Is there any tutorial about using fdisk without using sysinstall? Thanks Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Dual Fibre Channel Host Adapter
Hi all we have a few FreeBSD 5.4 boxes on HP Proliant DL360 and DL380. We have to buy some Dual Fibre Channel Host Adapter for these hosts and we would like to know which are the best supported by FreeBSD. If you have any experience with Fibre Channel (e.g. bad drivers, bad compatibility) please let us know. Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
make buildworld fails
Hi all I just did a cvsup with this supfile: __ *default host=cvsup.fi.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=RELENG_5 *default delete use-rel-suffix *default compress src-all __ Then I started to make buildworld. But it fails with this error: __ cc -O3 -mtune=pentium4 -march=pentium4 -pipe -funroll-loops -ffast-math -march=pentium4 -I/usr/src/lib/libc/include -I/usr/src/lib/libc/../../include -I/usr/src/lib/libc/i386 -D__DBINTERFACE_PRIVATE -I/usr/src/lib/libc/../../contrib/gdtoa -DINET6 -I/usr/obj/usr/src/lib/libc -DPOSIX_MISTAKE -I/usr/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/usr/src/lib/libc/rpc -DYP -DHESIOD -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -c /usr/src/lib/libc/net/res_debug.c In file included from /usr/src/lib/libc/net/res_debug.c:786: /usr/src/lib/libc/net/res_debug.c: In function `__loc_aton': /usr/src/lib/libc/net/res_debug.c:576: warning: passing arg 1 of `precsize_aton' from incompatible pointer type In file included from /usr/src/lib/libc/net/res_debug.c:797: /usr/src/lib/libc/net/res_debug.c:576: warning: passing arg 1 of `precsize_aton' from incompatible pointer type In file included from /usr/src/lib/libc/net/res_debug.c:808: /usr/src/lib/libc/net/res_debug.c:576: warning: passing arg 1 of `precsize_aton' from incompatible pointer type __ Any idea what's happened? Thanks a lot. Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: make buildworld fails
Yes. You're using unsupported optimizations. Please read very carefully the comments above CFLAGS in /usr/share/examples/etc/make.conf - Giorgos Thanks a lot! I'll use a safer optimization. Valeiro ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Jails on NFS: locks on file
Hi all, we are using FreeBSD 5.4 with some jails. One of this jail is on a NFS directory - I mean: the whole filesystem of this jail is on a remote directory, exported by a FreeBSD 5.4 server with NFS, and the 'host' system (the one that started and stopped the jail) mounts it via NFS. In this jail we can't perform a 'flock' operation, even if the NFS server has rpc.lockd and rpc.statd. We built a little executable in C like this (let's call it myflock): ___ #include stdio.h #include errno.h #include fcntl.h int main() { int lockfd; char* tempfile=tempfile; lockfd=open(tempfile,O_CREAT); if (flock(lockfd, LOCK_SH|LOCK_NB)==-1) { printf(ERROR shared lock: %d,errno); } if (flock(lockfd, LOCK_EX|LOCK_NB)==-1) { printf(ERROR exclusive lock: %d,errno); } close(lockfd); } ___ We executed on a local directory and it gets the flock. We executed on the mounted NFS partition (with rpc.lockd and rpc.statd) and it works. We executed in the jail-NFS and it fails! Errno 45 (from '/usr/include/errno.h': #define EOPNOTSUPP 45 /* Operation not supported */). The directory where we launch myflock is the same as the previous command (no permission problems). We executed in a jail contained in a md mounted on a NFS directory and it works. Could it be a rpcbind issue (the jail can't get the flock since it can't rpc-contact the NFS server)? Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
vipw: could not lock the passwd file: : Operation not supported
Hi all, we have FreeBSD 5.4 jail which is mounted via NFS from a host machine. The filesystem containing the jail is mounted from a remote machine. Everything is fine, except when I try to add a user in the jail I get a: vipw: could not lock the passwd file: : Operation not supported I solved the problem in pwd_mkdb using the -i switch. But I can't find any similar options in vipw. Has anyone an idea about this? Bye Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: vipw: could not lock the passwd file: : Operation not supported
From: Nikolas Britton [EMAIL PROTECTED] Reply-To: Nikolas Britton [EMAIL PROTECTED] To: Valerio Daelli [EMAIL PROTECTED] Subject: Re: vipw: could not lock the passwd file: : Operation not supported Date: Mon, 6 Jun 2005 10:20:10 -0500 MIME-Version: 1.0 Received: from wproxy.gmail.com ([64.233.184.206]) by mc2-f21.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Mon, 6 Jun 2005 08:26:52 -0700 Received: by wproxy.gmail.com with SMTP id 67so4729994wrifor [EMAIL PROTECTED]; Mon, 06 Jun 2005 08:26:51 -0700 (PDT) Received: by 10.54.49.26 with SMTP id w26mr3295310wrw;Mon, 06 Jun 2005 08:20:11 -0700 (PDT) Received: by 10.54.124.2 with HTTP; Mon, 6 Jun 2005 08:20:10 -0700 (PDT) X-Message-Info: JGTYoYF78jEHjJx36Oi8+Z3TmmkSEdPtfpLB7P/ybN8= DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=I46dF0QiyvoOaAaieZMXRo9eli2REHtIyOzsvoJNfKA106m75TVN2eyGqF+PiwyDr4/NPhGsJwTbBk5VXzljyjP9OKgb2zDuFEZTf+9p4GvPGPs8Tz1R+J/+n1nMLRZeaGGGSAVQ7KKj3BsWhPIcEtJbAvS1Agj2rhzc3B/kIjo= References: [EMAIL PROTECTED] [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] X-OriginalArrivalTime: 06 Jun 2005 15:26:52.0848 (UTC) FILETIME=[2A6AAB00:01C56AAC] On 6/6/05, Valerio Daelli [EMAIL PROTECTED] wrote: Hi all, we have FreeBSD 5.4 jail which is mounted via NFS from a host machine. The filesystem containing the jail is mounted from a remote machine. Everything is fine, except when I try to add a user in the jail I get a: vipw: could not lock the passwd file: : Operation not supported I solved the problem in pwd_mkdb using the -i switch. But I can't find any similar options in vipw. Has anyone an idea about this? Bye Valerio Daelli It sounds like your not logged in as root, I'm sure you are but I have never played with jails. Have you tried the adduser or pw commands?, vipw is not the best tool for adding users because you can fsck your system if your not careful. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: vipw: could not lock the passwd file: : Operation not supported
Yes, I am root. The problem is that some tools like vipw and pam utilities want to get a flock on some files, like /etc/passwd. If they can't (because of plain NFS) they complain. I've been suggested to try with rpc.lockd. Thanks for your help! Valerio Daelli It sounds like your not logged in as root, I'm sure you are but I have never played with jails. Have you tried the adduser or pw commands?, vipw is not the best tool for adding users because you can fsck your system if your not careful. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD on AlphaServer DS25
Hello we are trying to install FreeBSD 5.4 (Alpha Version) on a AlphaServer DS25. It fails when we start to boot from the CD. This machine doesn't have any floppy so we cannot try the floppy install. We have similar problem installing Debian so we think this model has problem booting with normal iso-images for Alpha. Does anybody of you has any hint about FreeBSD's supported Alpha Servers? Thanks a lot Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Linux library conversion
I finally did it and it works great! Thanks a lot! The support here is really helpful! Valerio Daelli What do you mean? We already have compat_linux. Do you mean I sholud use a linux perl binary? Yes. Install it and your library under /compat/linux. See the handbook for more information about running Linux binaries on FreeBSD. Kris attach3 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Statically linked bash
Hello we are trying to compile a statically linked bash from ports. I edited the Makefile in /usr/ports/shells/bash with '--enable-static-link' in CONFIGURE_ARGS. But it didn't work (it compiled a dynamically linked one). So I entered in work/bash-3.0 and configured by and with ./configure ...DEFAULT_ARGS... --enable-static-link But it didn't work. So I edited every Makefile in these directories, to include in every gcc argument -static. But It didn't work. That's the last compile operation (notice the -static) gcc -L./builtins -L./lib/readline -L./lib/readline -L./lib/glob -L./lib/tilde -L./lib/sh -static -static -rdynamic -g -O2 -o bash shell.o eval.o y.tab.o general.o make_cmd.o print_cmd.o dispose_cmd.o execute_cmd.o variables.o copy_cmd.o error.o expr.o flags.o jobs.o subst.o hashcmd.o hashlib.o mailcheck.o trap.o input.o unwind_prot.o pathexp.o sig.o test.o version.o alias.o array.o arrayfunc.o braces.o bracecomp.o bashhist.o bashline.o list.o stringlib.o locale.o findcmd.o redir.o pcomplete.o pcomplib.o syntax.o xmalloc.o -lbuiltins -lsh -lreadline -lhistory -ltermcap -lglob -ltilde /usr/local/lib/libintl.so /usr/local/lib/libiconv.so But I keep getting a #file bash bash: ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), for FreeBSD 5.4, dynamically linked (uses shared libs), not stripped Thanks a milion Valerio Daelli ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Linux library conversion
What do you mean? We already have compat_linux. Do you mean I sholud use a linux perl binary? Or else? Sorry I am a bit new to compat_linux issues. Thanks Valerio Daelli Hello we have a linux perl program to run in FreeBSD. We need to convert this library from Linux to FreeBSD: msparser.so:ELF 32-bit LSB shared object, Intel 80386, version 1 (GNU/Linux), not stripped Is there any tool similar to brandelf to convert this library and make it work under FreeBSD? Thanks Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Linux library conversion
Hello we have a linux perl program to run in FreeBSD. We need to convert this library from Linux to FreeBSD: msparser.so:ELF 32-bit LSB shared object, Intel 80386, version 1 (GNU/Linux), not stripped Is there any tool similar to brandelf to convert this library and make it work under FreeBSD? Thanks Valerio ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Linux Perl Program not working
Hello everybody we are trying to use a linux perl program called Mascot on FreeBSD. It is statistical-bioinformatic software. We use this program on Linux RedHat 7.3 (glibc 2.3.2), perl 5.8.6. We copied the program and the libraries. We tried installing the ports linux_base (glibc 2.1.3), linux_base-rh-9 (2.3.2). What actually happens is this: 1) If we use freebsd-perl 5.8.6 (we tried the 'plain' and the ithreads one) when we launch this application it fails with a Bus error - core dump. We did a 'strace' on it and it fails after loading some libraries (I report it at the end). This perl program goes into a 'use msparser;', then the msparser.pm file calls a msparser.so file which is a Gnu/Linux shared object. We could't recompile this library since we don't have source code. We just copied it from Linux. /msparser.so:ELF 32-bit LSB shared object, Intel 80386, version 1 (GNU/Linux), not stripped 2) If we use an rpm-installed Active Perl 5.8.6 designed for Linux Red Hat, the program fails with: Can't load '../bin/auto/msparser/msparser.so' for module msparser: ../bin/auto/msparser/msparser.so: ELF file OS ABI invalid at /usr/local/ActivePerl-5.8/lib/5.8.6/i686-linux-thread-multi/DynaLoader.pm line 230. Have anyone any idea what happened? Thanks Valerio Daelli Strace last lines of output: ___ access(/lib/ld-linux.so.2, F_OK) = -1 ENOENT (No such file or directory) access(/usr/lib/ld-linux.so.2, F_OK) = -1 ENOENT (No such file or directory) access(/usr/lib/compat/ld-linux.so.2, F_OK) = -1 ENOENT (No such file or directory) access(/usr/local/lib/ld-linux.so.2, F_OK) = -1 ENOENT (No such file or directory) access(/usr/X11R6/lib/ld-linux.so.2, F_OK) = -1 ENOENT (No such file or directory) access(/compat/linux/lib/ld-linux.so.2, F_OK) = 0 mprotect(0x282bb000, 1286144, PROT_READ|PROT_WRITE|PROT_EXEC) = 0 mmap(0, 27880, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x28638000 munmap(0x28638000, 27880) = 0 mprotect(0x282bb000, 1286144, PROT_READ|PROT_EXEC) = 0 mmap(0, 2528, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x28638000 munmap(0x28638000, 2528)= 0 mmap(0, 2984, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x28638000 munmap(0x28638000, 2984)= 0 mmap(0, 17504, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x28638000 munmap(0x28638000, 17504) = 0 mmap(0, 496, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0) = 0x28638000 munmap(0x28638000, 496) = 0 sigprocmask(SIG_SETMASK, [], NULL) = 0 --- SIGBUS (Bus error) --- --- SIGBUS (Bus error) --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]