can't ping localhost
I first noticed the problem when the machine stopped sending local mail; a typical entry: Aug 19 10:08:30 online sm-msp-queue[68533]: o7IKAhth008649: to=timot...@xxx.njit.edu, ctladdr=timothyk (1001/1001), delay=17:57:47, xdelay=00:00:00, mailer=relay, pri=3360050, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Can't assign requested address Non-local mail still works: Aug 19 10:14:11 online sm-mta[68582]: o7JEEB8I068582: from=kell...@njit.edu, size=593, class=0, nrcpts=1, msgid=4c6d3c2e.1060...@njit.edu, proto=ESMTP, daemon=IPv4, relay=mail-xxx.njit.edu [128.235.251.157] Aug 19 10:14:11 online sm-mta[68584]: o7JEEB8I068582: to=timot...@xxx.njit.edu, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30840, relay=local, dsn=2.0.0, stat=Sent When I ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address # uname -a FreeBSD xxx.njit.edu 7.3-STABLE FreeBSD 7.3-STABLE #0: Tue Mar 30 14:35:56 EDT 2010 timot...@xxx.njit.edu:/usr/obj/usr/src/sys/MARCH31 i386 /etc/hosts, /etc/hosts.conf, /etc/resolv.conf all look fine. I diffed them with another working 7.3-STABLE machine I have. I have built world and kernel to yesterday's 7.3-STABLE, but I haven't rebooted the machine. I'm thinking that if this is a hardware problem, once it goes down for a reboot, it may not come back up. I'm eagerly open to suggestions. Tim Kellers NJIT ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On 8/19/10 10:21 AM, Tim Kellers wrote: When I ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address Hi, Is the loopback interface (lo0) up? Regards, -- Glen Barber ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On 19/08/2010 15:21, Tim Kellers wrote: I'm eagerly open to suggestions. What does 'ifconfig lo0' say? What does 'sockstat | grep :25' say? What does 'ls -la /usr/libexec/sendmail/' say? What does 'mount | grep /usr' say? It sounds as if either: * Your loopback interface has lost address 127.0.0.1 or: * Some process other than a live sendmail instance has bound to port 25 on the loopback. or: * sendmail has somehow lost its setgid-ness Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matt...@infracaninophile.co.uk Kent, CT11 9PW signature.asc Description: OpenPGP digital signature
Re: can't ping localhost
On 08/19/10 10:55, Glen Barber wrote: On 8/19/10 10:21 AM, Tim Kellers wrote: When I ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address Hi, Is the loopback interface (lo0) up? Regards, lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 Nope, it is not. And I don't know how that can happen. Thanks Tim Kellers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On 08/19/10 11:02, Matthew Seaman wrote: On 19/08/2010 15:21, Tim Kellers wrote: I'm eagerly open to suggestions. What does 'ifconfig lo0' say? What does 'sockstat | grep :25' say? What does 'ls -la /usr/libexec/sendmail/' say? What does 'mount | grep /usr' say? It sounds as if either: * Your loopback interface has lost address 127.0.0.1 or: * Some process other than a live sendmail instance has bound to port 25 on the loopback. or: * sendmail has somehow lost its setgid-ness Cheers, Matthew # ifconfig lo0 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 (lo0 looks unconfigured to me) # sockstat | grep :25 root sendmail 7371 3 tcp4 *:25 *:* root sendmail 7371 5 tcp6 *:25 *:* (that looks fine to me) # ls -la /usr/libexec/sendmail/ total 676 drwxr-xr-x 2 root wheel 512 Mar 30 21:03 . drwxr-xr-x 5 root wheel1536 Mar 30 21:03 .. -r-xr-sr-x 1 root smmsp 669788 Mar 30 21:03 sendmail (looks OK to me, too) # mount | grep /usr /dev/aacd0s1f on /usr (ufs, local, soft-updates) (Looks normal to me, too) Thanks Tim Kellers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On 08/19/10 11:51, mikel king wrote: Your lo0 only has inet6 addresses, perhaps try binding a v4 address? Cheers, m! On Aug 19, 2010, at 11:12, Tim Kellerskell...@njit.edu wrote: On 08/19/10 11:02, Matthew Seaman wrote: On 19/08/2010 15:21, Tim Kellers wrote: I'm eagerly open to suggestions. What does 'ifconfig lo0' say? What does 'sockstat | grep :25' say? What does 'ls -la /usr/libexec/sendmail/' say? What does 'mount | grep /usr' say? It sounds as if either: * Your loopback interface has lost address 127.0.0.1 or: * Some process other than a live sendmail instance has bound to port 25 on the loopback. or: * sendmail has somehow lost its setgid-ness Cheers, Matthew # ifconfig lo0 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 (lo0 looks unconfigured to me) # sockstat | grep :25 root sendmail 7371 3 tcp4 *:25 *:* root sendmail 7371 5 tcp6 *:25 *:* (that looks fine to me) # ls -la /usr/libexec/sendmail/ total 676 drwxr-xr-x 2 root wheel 512 Mar 30 21:03 . drwxr-xr-x 5 root wheel1536 Mar 30 21:03 .. -r-xr-sr-x 1 root smmsp 669788 Mar 30 21:03 sendmail (looks OK to me, too) # mount | grep /usr /dev/aacd0s1f on /usr (ufs, local, soft-updates) (Looks normal to me, too) Thanks Tim Kellers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org Thanks, Once I saw that lo0 was not configured for ipv4, I did a: #ifconfig lo0 inet 127.0.0.1 netmask 255.0.0.0 and local mail resolved and was delivered and I can now ping localhost. I just have to wonder how in heck it got that way. Thanks all Tim Kellers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
Your lo0 only has inet6 addresses, perhaps try binding a v4 address? Cheers, m! On Aug 19, 2010, at 11:12, Tim Kellers kell...@njit.edu wrote: On 08/19/10 11:02, Matthew Seaman wrote: On 19/08/2010 15:21, Tim Kellers wrote: I'm eagerly open to suggestions. What does 'ifconfig lo0' say? What does 'sockstat | grep :25' say? What does 'ls -la /usr/libexec/sendmail/' say? What does 'mount | grep /usr' say? It sounds as if either: * Your loopback interface has lost address 127.0.0.1 or: * Some process other than a live sendmail instance has bound to port 25 on the loopback. or: * sendmail has somehow lost its setgid-ness Cheers, Matthew # ifconfig lo0 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 (lo0 looks unconfigured to me) # sockstat | grep :25 root sendmail 7371 3 tcp4 *:25 *:* root sendmail 7371 5 tcp6 *:25 *:* (that looks fine to me) # ls -la /usr/libexec/sendmail/ total 676 drwxr-xr-x 2 root wheel 512 Mar 30 21:03 . drwxr-xr-x 5 root wheel1536 Mar 30 21:03 .. -r-xr-sr-x 1 root smmsp 669788 Mar 30 21:03 sendmail (looks OK to me, too) # mount | grep /usr /dev/aacd0s1f on /usr (ufs, local, soft-updates) (Looks normal to me, too) Thanks Tim Kellers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Thu, Mar 11, 2010 at 02:47:35AM +, Anton Shterenlikht typed: I believe -current has a issue where you can not ping localhost atm all my machines are current, but some are more current than others.. Why exactly are you running -current? People that do are supposed to do some investigations themselves, and if they still can't find the cause at least provide information like (in this case) routing info, ifconfig etc and what they have done to investigate, Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: The real problem is the routing got busted by a bad commit. This affects both ping and sendmail (and many others). I recommend you run a -stable branch. Ruben ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
From owner-freebsd-questi...@freebsd.org Wed Mar 10 20:24:31 2010 Date: Thu, 11 Mar 2010 02:23:44 + From: Anton Shterenlikht me...@bristol.ac.uk To: freebsd-questions@freebsd.org Subject: can't ping localhost I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C # cat /etc/hosts # $FreeBSD: head/etc/hosts 109997 2003-01-28 21:29:23Z dbaker $ # ::1 localhost localhost.men.bris.ac.uk 127.0.0.1 localhost localhost.men.bris.ac.uk So far, can't find anything relevant on the net. Please advise what does 'ifconfig -a', and 'netstat -nr' show? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
can't ping localhost
I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C # cat /etc/hosts # $FreeBSD: head/etc/hosts 109997 2003-01-28 21:29:23Z dbaker $ # ::1 localhost localhost.men.bris.ac.uk 127.0.0.1 localhost localhost.men.bris.ac.uk So far, can't find anything relevant on the net. Please advise many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 9:23 PM, Anton Shterenlikht me...@bristol.ac.uk wrote: I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C # cat /etc/hosts # $FreeBSD: head/etc/hosts 109997 2003-01-28 21:29:23Z dbaker $ # ::1 localhost localhost.men.bris.ac.uk 127.0.0.1 localhost localhost.men.bris.ac.uk So far, can't find anything relevant on the net. Please advise many thanks anton -- Just a shot in the dark. Do you have a default route? -r ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 8:23 PM, Anton Shterenlikht me...@bristol.ac.uk wrote: I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C what is the output of uname -a ? I believe -current has a issue where you can not ping localhost atm Sam Fourman Jr. Fourman Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 9:23 PM, Anton Shterenlikht me...@bristol.ac.uk wrote: I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C # cat /etc/hosts # $FreeBSD: head/etc/hosts 109997 2003-01-28 21:29:23Z dbaker $ # ::1 localhost localhost.men.bris.ac.uk 127.0.0.1 localhost localhost.men.bris.ac.uk So far, can't find anything relevant on the net. Please advise many thanks anton http://www.freebsd.org/doc/handbook/network-routing.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 08:34:08PM -0600, Sam Fourman Jr. wrote: On Wed, Mar 10, 2010 at 8:23 PM, Anton Shterenlikht me...@bristol.ac.uk wrote: I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C what is the output of uname -a ? # uname -a FreeBSD mech-anton240.men.bris.ac.uk 9.0-CURRENT FreeBSD 9.0-CURRENT #2: Tue Mar 9 14:35:40 GMT 2010 me...@mech-anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF sparc64 I believe -current has a issue where you can not ping localhost atm all my machines are current, but some are more current than others.. Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: # tail /var/log/maillog Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0irgd029426: to=mexas, ctladdr=mexas (1001/1001), delay=01:32:05, xdelay=00:00:00, mailer=relay, pri=480031, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0hbGe029358: to=mexas, ctladdr=mexas (1001/1001), delay=01:33:21, xdelay=00:00:00, mailer=relay, pri=570028, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4K005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3721559, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4L005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3725184, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4L004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903061, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4K004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903122, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3bvPl004242: to=root, ctladdr=root (0/0), delay=22:39:01, xdelay=00:00:00, mailer=relay, pri=4530195, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3c9wG004609: to=root, ctladdr=root (0/0), delay=22:38:49, xdelay=00:00:00, mailer=relay, pri=4533820, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A340iF002543: to=root, ctladdr=root (0/0), delay=23:12:58, xdelay=00:00:00, mailer=relay, pri=4711758, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A33vXB002495: to=root, ctladdr=root (0/0), delay=23:13:01, xdelay=00:00:00, mailer=relay, pri=4801697, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host # many thanks anton Sam Fourman Jr. Fourman Networks -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 6:34 PM, Sam Fourman Jr. sfour...@gmail.com wrote: On Wed, Mar 10, 2010 at 8:23 PM, Anton Shterenlikht me...@bristol.ac.uk wrote: I misconfigured my system somehow, so now I can't ping localhost: # ping localhost PING localhost (127.0.0.1): 56 data bytes ping: sendto: No route to host ping: sendto: No route to host ^C what is the output of uname -a ? I believe -current has a issue where you can not ping localhost atm That's correct. Try the following patch: http://people.freebsd.org/~qingli/route.h.diff -- Rob Farmer Sam Fourman Jr. Fourman Networks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 8:47 PM, Anton Shterenlikht me...@bristol.ac.ukwrote: # uname -a FreeBSD mech-anton240.men.bris.ac.uk 9.0-CURRENT FreeBSD 9.0-CURRENT #2: Tue Mar 9 14:35:40 GMT 2010 me...@mech-anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF sparc64 I believe -current has a issue where you can not ping localhost atm all my machines are current, but some are more current than others.. Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: # tail /var/log/maillog Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0irgd029426: to=mexas, ctladdr=mexas (1001/1001), delay=01:32:05, xdelay=00:00:00, mailer=relay, pri=480031, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0hbGe029358: to=mexas, ctladdr=mexas (1001/1001), delay=01:33:21, xdelay=00:00:00, mailer=relay, pri=570028, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4K005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3721559, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4L005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3725184, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4L004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903061, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4K004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903122, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3bvPl004242: to=root, ctladdr=root (0/0), delay=22:39:01, xdelay=00:00:00, mailer=relay, pri=4530195, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3c9wG004609: to=root, ctladdr=root (0/0), delay=22:38:49, xdelay=00:00:00, mailer=relay, pri=4533820, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A340iF002543: to=root, ctladdr=root (0/0), delay=23:12:58, xdelay=00:00:00, mailer=relay, pri=4711758, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A33vXB002495: to=root, ctladdr=root (0/0), delay=23:13:01, xdelay=00:00:00, mailer=relay, pri=4801697, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host # many thanks anton -- Anton Shterenlikht If you run CURRENT, you would do well to follow the mailing list. http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/2ab13c4b31228c88/15dab18a9066e9a2?lnk=raot -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: # tail /var/log/maillog Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0irgd029426: to=mexas, ctladdr=mexas (1001/1001), delay=01:32:05, xdelay=00:00:00, mailer=relay, pri=480031, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Well, have you considered looking to see if it's right? What do you get in response to: $ netstat -rn | grep 127 127.0.0.1 127.0.0.1 UH 064746lo0 $ Showing what I get on a 7.0 server. Unless they've moved things around since 7.0, you probably want to make sure that you've not messed with the ifconfig_lo0 line in /etc/defaults/rc.conf. My apologies if that config stuff has changed in the latest; I don't have access to the latest right now. -- --Jon Radel j...@radel.com
Re: can't ping localhost
On Wed, Mar 10, 2010 at 10:00:01PM -0500, Jon Radel wrote: Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: # tail /var/log/maillog Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0irgd029426: to=mexas, ctladdr=mexas (1001/1001), delay=01:32:05, xdelay=00:00:00, mailer=relay, pri=480031, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Well, have you considered looking to see if it's right? What do you get in response to: $ netstat -rn | grep 127 127.0.0.1 127.0.0.1 UH 064746lo0 $ Showing what I get on a 7.0 server. Unless they've moved things around since 7.0, you probably want to make sure that you've not messed with the ifconfig_lo0 line in /etc/defaults/rc.conf. My apologies if that config stuff has changed in the latest; I don't have access to the latest right now. # netstat -rn|grep 127 127.0.0.1 link#2 UH 00lo0 thank you anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: can't ping localhost
On Wed, Mar 10, 2010 at 08:58:12PM -0600, Adam Vande More wrote: On Wed, Mar 10, 2010 at 8:47 PM, Anton Shterenlikht me...@bristol.ac.ukwrote: # uname -a FreeBSD mech-anton240.men.bris.ac.uk 9.0-CURRENT FreeBSD 9.0-CURRENT #2: Tue Mar 9 14:35:40 GMT 2010 me...@mech-anton240.men.bris.ac.uk:/usr/obj/usr/src/sys/QOF sparc64 I believe -current has a issue where you can not ping localhost atm all my machines are current, but some are more current than others.. Well, the ping issue is just an example. My real problem is that sendmail can't send anything locally: # tail /var/log/maillog Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0irgd029426: to=mexas, ctladdr=mexas (1001/1001), delay=01:32:05, xdelay=00:00:00, mailer=relay, pri=480031, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2B0hbGe029358: to=mexas, ctladdr=mexas (1001/1001), delay=01:33:21, xdelay=00:00:00, mailer=relay, pri=570028, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4K005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3721559, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A87g4L005078: to=root, delay=18:09:16, xdelay=00:00:00, mailer=relay, pri=3725184, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4L004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903061, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A77d4K004977: to=root, delay=19:09:19, xdelay=00:00:00, mailer=relay, pri=3903122, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3bvPl004242: to=root, ctladdr=root (0/0), delay=22:39:01, xdelay=00:00:00, mailer=relay, pri=4530195, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A3c9wG004609: to=root, ctladdr=root (0/0), delay=22:38:49, xdelay=00:00:00, mailer=relay, pri=4533820, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A340iF002543: to=root, ctladdr=root (0/0), delay=23:12:58, xdelay=00:00:00, mailer=relay, pri=4711758, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host Mar 11 02:16:58 mech-anton240 sm-msp-queue[32611]: o2A33vXB002495: to=root, ctladdr=root (0/0), delay=23:13:01, xdelay=00:00:00, mailer=relay, pri=4801697, relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: [127.0.0.1]: No route to host # many thanks anton -- Anton Shterenlikht If you run CURRENT, you would do well to follow the mailing list. http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/2ab13c4b31228c88/15dab18a9066e9a2?lnk=raot yes, I've seen this. It's just that usually when I get problems I suspect my incompetence, so this thread didn't come to mind. many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Can't ping
Rem P Roberti wrote: Can someone tell what is going on here. All of a sudden I can't ping. When I try a get this message: ping: sendto: Permission denied All internet functions seem to be working fine...just can't ping. Rem ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] pinging from a jail? check your sysctls. raw ips something or other. HTH ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping
Can someone tell what is going on here. All of a sudden I can't ping. When I try a get this message: ping: sendto: Permission denied All internet functions seem to be working fine...just can't ping. Rem ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping
check your firewall rules On Sun, 20 Jul 2008, Rem P Roberti wrote: Can someone tell what is going on here. All of a sudden I can't ping. When I try a get this message: ping: sendto: Permission denied All internet functions seem to be working fine...just can't ping. Rem ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping
In [EMAIL PROTECTED], Rem P Roberti wrote: Can someone tell what is going on here. All of a sudden I can't ping. When I try a get this message: ping: sendto: Permission denied All internet functions seem to be working fine...just can't ping. Firewall blocking ICMP protocol. HTH -- ·-- ·- ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- -- pgpXtPJZCsrCW.pgp Description: PGP signature
Re: Can't ping
Rem P Roberti [EMAIL PROTECTED] wrote: [...] ping: sendto: Permission denied Did you (or another admin) change firewall rules? Also, please do a simple google or list archive search before posting to the list. Searching for the error you paste above results in several links that might've helped you troubleshoot this problem. [...] -- Sahil Tandon [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Wojciech Puchar wrote: check your firewall rules On Sun, 20 Jul 2008, Rem P Roberti wrote: Can someone tell what is going on here. All of a sudden I can't ping. When I try a get this message: ping: sendto: Permission denied All internet functions seem to be working fine...just can't ping. You folks are all probably dead on, exactly right, but I recall once, about 18 months ago, that my permissions on one machine went haywire, and it lost the setuid bit in the permissions. On some machines, this'd sure enough hurt things. Maybe this here (below) could help? TCSH-april:chuck:~:#103-15:18ls -l `which ping` - -r-sr-xr-x 1 root wheel 23868 Jun 15 21:09 /sbin/ping* If those good suggestions regarding the firewall turn out not to work, maybe this could be experimented with? -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkiDzjEACgkQz62J6PPcoOmSAgCfTcM1RMXpEu3jKL3Nrov2zY4F neIAn0YLUss8E1joGGXQvgW2+MivEXKn =C+x+ -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
can't ping
After upgrading a -CURRENT box from the April 19 version to one from yesterday, ping on that box seems to be broken. (I noticed the behavior today; I don't know whether it's directly related to the upgrade or not.) Specifically: huff@ netstat -rn -f inet Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire default209.6.22.1 UGS 0 1917213em0 10.0.0.0/8 link#2 UC 00em1 10.0.0.1 00:0e:0c:a8:a7:e9 UHLW138374lo0 10.255.255.255 ff:ff:ff:ff:ff:ff UHLWb 1 267em1 127.0.0.1 127.0.0.1 UH 0 272685lo0 209.6.22.0/23 link#1 UC 00em0 209.6.22.1 00:0d:66:25:50:01 UHLW2 25em0 1196 209.6.22.188 00:0e:0c:a8:a7:e8 UHLW16lo0 209.6.23.255 ff:ff:ff:ff:ff:ff UHLWb 1 267em0 huff@ ping 209.6.22.188 PING 209.6.22.188 (209.6.22.188): 56 data bytes 64 bytes from 209.6.22.188: icmp_seq=0 ttl=64 time=0.075 ms 64 bytes from 209.6.22.188: icmp_seq=1 ttl=64 time=0.093 ms 64 bytes from 209.6.22.188: icmp_seq=2 ttl=64 time=0.086 ms 64 bytes from 209.6.22.188: icmp_seq=3 ttl=64 time=0.078 ms 64 bytes from 209.6.22.188: icmp_seq=4 ttl=64 time=0.090 ms huff@ ping 209.6.22.1 PING 209.6.22.1 (209.6.22.1): 56 data bytes ^C --- 209.6.22.1 ping statistics --- 10 packets transmitted, 0 packets received, 100.0% packet loss I have a firewall; rules are appended. The wierd part is other connectivity works: I can ftp, web-surf, telnet, etc.. Any ideas on what's broken? Robert Huff 00100 630662 280315972 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00350 117805065589 allow udp from any 67-68 to any dst-port 67-68 00600 0 0 allow ip6 from any to any via lo0 00610 0 0 deny ip6 from any to ::1 00620 0 0 deny ip6 from ::1 to any 00630 36 2304 allow ip6 from :: to ff02::/16 proto ipv6-icmp 00640 0 0 allow ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp 00650 47 3384 allow ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp 00660 0 0 allow ip6 from 2001:db8:2:1::1 to 2001:db8:2:1::/64 00670 0 0 allow ip6 from 2001:db8:2:1::/64 to 2001:db8:2:1::1 00680 0 0 allow ip6 from fe80::/10 to ff02::/16 00690 0 0 allow ip6 from 2001:db8:2:1::/64 to ff02::/16 00700 0 0 allow ip6 from any to any established proto tcp 00710 0 0 allow ip6 from any to any frag 00720 0 0 allow ip6 from any to 2001:db8:2:1::1 dst-port 25 setup proto tcp 00730 0 0 allow ip6 from 2001:db8:2:1::1 to any setup proto tcp 00740 4320 deny ip6 from any to any setup proto tcp 00750 0 0 allow ip6 from any 53 to 2001:db8:2:1::1 proto udp 00760 0 0 allow ip6 from 2001:db8:2:1::1 to any dst-port 53 proto udp 00770 0 0 allow ip6 from any 123 to 2001:db8:2:1::1 proto udp 00780 0 0 allow ip6 from 2001:db8:2:1::1 to any dst-port 123 proto udp 00790 0 0 allow ip6 from any to any ip6 icmp6types 1 proto ipv6-icmp 008001415 90560 allow ip6 from any to any ip6 icmp6types 2,135,136 proto ipv6-icmp 06000 0 0 deny log logamount 100 tcp from any to any dst-port 137 in via em0 06050 32 3000 deny log logamount 100 udp from any to any dst-port 137 in via em0 06100 0 0 deny log logamount 100 tcp from any to any dst-port 138 in via em0 06150 235 56158 deny log logamount 100 udp from any to any dst-port 138 in via em0 06200 0 0 deny log logamount 100 tcp from any to any dst-port 139 in via em0 06250 0 0 deny log logamount 100 udp from any to any dst-port 139 in via em0 07000 0 0 deny log logamount 100 tcp from any to any dst-port 111 in via em0 07050 0 0 deny log logamount 100 udp from any to any dst-port 111 in via em0 07100 0 0 deny log logamount 100 tcp from any to any dst-port 530 in via em0 07150 0 0 deny log logamount 100 udp from any to any dst-port 530 in via em0 07200 0 0 deny log logamount 100 tcp from any to any dst-port 161 in recv em0 07225 0 0 deny log logamount 100 udp from any to any dst-port 161 in recv em0 07250 0 0 deny log logamount 100 tcp from any to any dst-port 162 in recv em0 07275 0 0 deny log logamount 100 udp from any to any dst-port 162 in recv em0 07300 0 0 deny log logamount 100 tcp from any to any dst-port 194 07310 0 0 deny log logamount 100 udp from any to
Why can't ping
I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: Why can't ping
Hello! I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 I noticed you are using ed0 as the interface? There is no ed in FreeBSD. Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 This is your interface - le0. options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 It shows that your le0 interface has not been assigned with the network information that you listed. Try again but use le0 as your interface instead. Chris Haulmark media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward --- --- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions- [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
This is your interface - le0. Additonally do not forget to run /etc/netstart options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 It shows that your le0 interface has not been assigned with the network information that you listed. Try again but use le0 as your interface instead. Chris Haulmark sac. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
On Thu, 10 Jul 2008 05:10:25 -0400, Chris Haulmark [EMAIL PROTECTED] wrote: There is no ed in FreeBSD. Off topic, but there is: % man 4 ed ed -- NE-2000 and WD-80x3 Ethernet driver Older NIC, but still present, works for RealTek RTL-8029, for example. -- Polytropon From Magdeburg, Germany Happy FreeBSD user since 4.0 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Why can't ping
On Wed, Jul 09, 2008 at 04:01:27PM +0800, EdwardKing wrote: I configure ed0 when I install FreeBSD7.0,like follows: Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 Then I Ping itself,like follows: #ping 172.18.0.19 Then result is failure: ping: sendto: No route to host Why? I'll make a wild guess that you have DHCP turned on and your le0 NIC was automatically configured the way it shows below. Then, either you don't have an ed0 on the machine, or for some reason, the system does not find it. Check dmesg(8) to see if the system finds an ed0 NIC. jerry I use ifconfig -a to show my ip,like follows: le0: flags=8843 UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8 VLAN_MTU either 00:0d:18:23:32:7a inet6 fe80::20c:29ff:fe76:365a%le0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff00 broadcast 255.255.255.255 media: Ethernet autoselect status: active plip0:flags=108810 POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT metric 1500 lo0:flags=8049 UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff00 Where is my following configure information, I can't find them! Host:test.example.com Domain:test.com IPv4 GateWay: 172.18.0.1 Name server: 172.18.0.250 IPv4 Address: 172.18.0.19 Netmask:255.255.255.0 What raise to lost my configure information? How to configure my ip and how to ping successly? I am a newer to BSDUnix,please give me detail steps. Thanks in advance! Best regards, Edward -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
can't ping own ip configured on tun device
On my gateway I configured a tunnel device (tun0) and connected it with a remote host using OpenSSH. Ifconfig looks as follows:tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500inet 10.254.254.1 -- 10.254.254.2 netmask 0xff00 Opened by PID 4619I can ping or connect via ssh to 10.254.25.2 but I am unable to ping my own address (10.254.254.1). Is this supposed to work like that? Eventually I would like to have daemons listening only eg. on 10.254.254.1:80. How would I achieve this if I the machine doesen't even recognize 10.254.254.1 as it's own address.On the other side it's exactly otherwise arround, I can ping the gateway (?) but not the own address.Am I missing something important? Is this standard behavior for tun devices?Thanks.Warner _ Climb to the top of the charts! Play the word scramble challenge with star power. http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping localhost?
P.U.Kruppa wrote: On Sat, 30 Sep 2006, Chuck Swiger wrote: Laurence Sanford wrote: Anyone got any ideas on this? [EMAIL PROTECTED](~)$ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ^C --- 127.0.0.1 ping statistics --- 6 packets transmitted, 0 packets received, 100% packet loss [EMAIL PROTECTED](~)$ ifconfig lo0 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 If there isn't an inet 127.0.0.1 entry following, the loopback isn't properly configured. Perhaps you have a network_interfaces entry listed in /etc/rc.conf which does not mention lo0...? I think this entry should live in /etc/defaults/rc.conf ifconfig_lo0=inet 127.0.0.1 # default loopback device # configuration. Thanks Uli, I checked based on your post, and it is there. Perhaps I have something running at startup that's breaking things? Looks like I'll be digging a little more to see what I can find. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping localhost?
Laurence Sanford wrote: Anyone got any ideas on this? [EMAIL PROTECTED](~)$ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ^C --- 127.0.0.1 ping statistics --- 6 packets transmitted, 0 packets received, 100% packet loss [EMAIL PROTECTED](~)$ ifconfig lo0 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 If there isn't an inet 127.0.0.1 entry following, the loopback isn't properly configured. Perhaps you have a network_interfaces entry listed in /etc/rc.conf which does not mention lo0...? -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping localhost?
Chuck Swiger wrote: Laurence Sanford wrote: Anyone got any ideas on this? [EMAIL PROTECTED](~)$ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ^C --- 127.0.0.1 ping statistics --- 6 packets transmitted, 0 packets received, 100% packet loss [EMAIL PROTECTED](~)$ ifconfig lo0 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 If there isn't an inet 127.0.0.1 entry following, the loopback isn't properly configured. Perhaps you have a network_interfaces entry listed in /etc/rc.conf which does not mention lo0...? Thanks for even bothering to reply Chuck. Honestly, at my age, I should know better than to post to mailing lists while too tired to be coherent. The actual point of my question was, how exactly does a system come to boot up without having lo0 configured as 127.0.0.1? I do have a network interfaces line in rc.conf that specifies nve0, but that's the way it's always been on this box, and this is only a recent development that it's not been assigned correctly at boot time. I was looking into several other issues I've been seeing (not getting emails from this box for periodic tasks, etc) and finally ran it down to this. Did something change recently? My last update was sept 2nd, and this stopped working for me only about a week ago, maybe two, so it didn't coincide with that update. Now that I've got a little more mental capacity to work with, anyone got something to point me in the right direction? Is it a good idea to configure lo0 in rc.conf even though it should happen automatically? Thanks again. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping localhost?
On Sat, 30 Sep 2006, Chuck Swiger wrote: Laurence Sanford wrote: Anyone got any ideas on this? [EMAIL PROTECTED](~)$ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ^C --- 127.0.0.1 ping statistics --- 6 packets transmitted, 0 packets received, 100% packet loss [EMAIL PROTECTED](~)$ ifconfig lo0 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 If there isn't an inet 127.0.0.1 entry following, the loopback isn't properly configured. Perhaps you have a network_interfaces entry listed in /etc/rc.conf which does not mention lo0...? I think this entry should live in /etc/defaults/rc.conf ifconfig_lo0=inet 127.0.0.1 # default loopback device # configuration. Regards, Uli -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Peter Ulrich Kruppa Wuppertal Germany ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping localhost?
Anyone got any ideas on this? [EMAIL PROTECTED](~)$ ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1): 56 data bytes ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ping: sendto: Can't assign requested address ^C --- 127.0.0.1 ping statistics --- 6 packets transmitted, 0 packets received, 100% packet loss [EMAIL PROTECTED](~)$ ifconfig lo0 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't PING because i've got a NAT ISSUE =(
At the startup of my FreeBSD 5.3 (mini-install), i've got two mess about NAT: Warning: enable NAT: Invalid command Warning: enable nat: Failed 1 after, i've got the mess fxp0: device timeout TIA koub. :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping between FreeBSD and Win2K...
IPFW is initialized without any setup in the rc.conf file??? I was used the mini-install... it's automaticaly enable after installation?? TIA Mrachik. koub. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping between FreeBSD and Win2K...
Hello, I was setup the Win2K as client on the 192.168.3.2 ip adress (netmask 255.255.255.0), with a passerel on the FreeBSD (5.3R MINI-INSTALL) and the ip adress is 192.168.3.1. the Win2K computer name is windaube and the FreeBSD computer name is skoub. you can look bottom for detailled statistics: __ __ __ __ __ __ ON THE WIN2K COMPUTER: C:\ route print == = Liste d'Interfaces 0x1 ... MS TCP Loopback interface 0x103 ...00 04 ac 45 91 fb .. IBM 10/100 EtherJet PCI Adapter == = == = Itinéraires actifs : Destination réseauMasque réseau Adr. passerelle Adr. interface Métrique 0.0.0.0 0.0.0.0 192.168.3.1 192.168.3.2 1 127.0.0.0255.0.0.0127.0.0.1 127.0.0.1 1 192.168.3.0255.255.255.0 192.168.3.2 192.168.3.2 1 192.168.3.2 255.255.255.255127.0.0.1 127.0.0.1 1 192.168.3.255 255.255.255.255 192.168.3.2 192.168.3.2 1 224.0.0.0224.0.0.0 192.168.3.2 192.168.3.2 1 255.255.255.255 255.255.255.255 192.168.3.2 192.168.3.2 1 Passerelle par défaut : 192.168.3.1 == = Itinéraires persistants : Aucun C:\ ping 192.168.3.2 Envoi d'une requête 'ping' sur 192.168.3.2 avec 32 octets de données : Réponse de 192.168.3.2 : octets=32 temps10 ms TTL=128 Réponse de 192.168.3.2 : octets=32 temps10 ms TTL=128 Réponse de 192.168.3.2 : octets=32 temps10 ms TTL=128 Réponse de 192.168.3.2 : octets=32 temps10 ms TTL=128 Statistiques Ping pour 192.168.3.2: Paquets : envoyés = 4, reçus = 4, perdus = 0 (perte 0%), Durée approximative des boucles en millisecondes : minimum = 0ms, maximum = 0ms, moyenne = 0ms C:\ ping 192.168.3.1 Envoi d'une requête 'ping' sur 192.168.3.1 avec 32 octets de données : Délai d'attente de la demande dépassé. Délai d'attente de la demande dépassé. Délai d'attente de la demande dépassé. Délai d'attente de la demande dépassé. Statistiques Ping pour 192.168.3.1: Paquets : envoyés = 4, reçus = 0, perdus = 4 (perte 100%) Durée approcimative des boucles en millisecondes : minimum = 0ms, maximum = 0 ms, moyenne = 0ms C:\ arp -a Aucune entrée ARP trouvée __ __ __ __ __ __ ON THE FREEBSD COMPUTER (su mode): # ifconfig -a fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=8VLAN_MTU inet 192.168.3.1 netmask 0xff00 broadcast 192.168.3.255 inet6 fe80::204:acff:fe25:c4bd%fxp0 prefixlen 64 scopeid 0x1 ether 00:04:ac:25:c4:bd media: Ethernet autoselect (100 baseTX full-duplex) status: active plip0: flags=108810POINTOPOINT,SIMPLEX,MULTICAST mtu 1500 lo0: flags=8008LOOPBACK,MULTICAST mtu 16384 tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST mtu 1500 Opened by PID 200 # route get default route: writing to routing socket: No such process # route get 192.168.3.1 route to: skoub destination: skoub interface: lo0 flags: UP,HOST,DONE,LLINFO,WASCLONED,LOCAL recvpipe sendpipe ssthresh rtt,msec rttvar hopcountmtu expire 0 0 0 0 0 0 1500 0 # route get 192.168.3.2 route to: windaube destination: 192.168.3.0 mask: 255.255.255.0 interface: fxp0 flags: UP,DONE,CLONING recvpipe sendpipe ssthresh rtt,msec rttvar hopcountmtu expire 0 0 0 0 0 01500 -2153 # ping 192.168.3.1 PING 192.168.3.1 (192.168.3.1):56 data bytes 64 bytes from 192.168.3.1: icmp_seq=0 ttl=64 time=0.288 ms 64 bytes from 192.168.3.1: icmp_seq=0 ttl=64 time=0.232 ms 64 bytes from 192.168.3.1: icmp_seq=0 ttl=64 time=0.223 ms 64 bytes from 192.168.3.1: icmp_seq=0 ttl=64 time=0.216 ms ^C 'arret de l utilisateur --- 192.168.3.1 ping statistics --- 4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.216/0.240/0.288/0.028 ms # ping 192.168.3.2 PING 192.168.3.2 (192.168.3.2):56 data bytes ping: sendto: Host is down ping: sendto: Host is down ping: sendto: Host is
Re: Re: Can't ping between FreeBSD and Win2K...
Please, someone can help me? May be trouble in ipfw? Mrachik ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Running NAT and can't Ping
I have a strange problem. Here is my setup. ISP 1ISP 2 || Router 1Router 2 192.168.0.1 Internet Address A || || -- Switch ||| FreeBSD1 FreeBSD2 Windows 2000 192.168.0.254 192.168.0.2 192.168.0.253 Internet Address B (NAT) The problem is if NAT on FreeBSD2 is not running, all the machines can ping each other. If FreeBSD2 runs NAT, ping still works, except FreeBSD2 can't ping Router1 (192.168.0.1) and FreeBSD1 (192.168.0.254). FreeBSD2 can ping to the interent fine. The Windows 2000 machines gets it's IP from DHCP running on FreeBSD2. For a day, FreeBSD can't ping Windows 2000 either. But now it is able to. The NAT configuration on FreeBSD2 is : /sbin/natd -u -a (xxx.xxx.xxx.xxx Internet Address B) /sbin/ipfw -f flush /sbin/ipfw add divert natd all from any to any via (xxx.xxx.xxx.xxx Internet Address B) /sbin/ipfw add pass all from any to any The unusual setup is the FreeBSD2 only has one ethernet card, and is doing IP aliasing. I have another setup with 2 FreeBSD boxes, and one or both of them are doing NAT, and doesn't have this 'one way' ping problem. Thanks in advance. Shu - Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping lan PC from Gateway
Hello all, here is what I have going on INET-1-3-4 \ \ -2 Boxes 1 (216.138.226.17) = Main Firewall/Gateway (FBSD5.1) 2 (192.168.1.5) = LAN PC (WinSrv2K3) 3 (216.138.226.25) = Development Firewall/Gateway (FBSD5.1) 4 (192.168.2.199) = LAN PC (WinXP) 1 and 3 both have real IPs 1 and 3 are connected via a switch 1 and 2, and 3 and 4 are connected via separate hubs 2 and 3 uses 1 as gateway 4 uses 3 as gateway configured via dhcp from 3 1 and 3 uses IPFilter and NAT, 3 has no IPF rules loaded Here is the problem, it is with the connection between 3 and 4, I can ping from 4 to 3 but not from 3 to 4. From 4 I can ping 3, 1 and the Internet just fine. From 3 I can ping 1, 2 and the Internet but not 4. I find it interesting that I can ping 2 (assuming via 1). From 1 I can ping 2 and 3. Expectedly 4 can not ping 2, and vise versa, this is desired as ultimately I will VPN 3 to 1 to have full routing between networks. Here are the netstat -r results from 3 Internet: DestinationGatewayFlagsRefs Use Netif Expire defaultH17.C226.tor.veloc UGSc1 915ep0 localhost localhost UH 113742lo0 192.168.2 link#1 UC 20xl0 192.168.2.199 00:e0:98:90:2d:9b UHLW3 986xl0 672 192.168.2.255 ff:ff:ff:ff:ff:ff UHLWb 1 796xl0 H16.C226.tor.veloc link#3 UC 30ep0 H17.C226.tor.veloc 00:80:c6:ea:7a:f1 UHLW20ep0 1170 H27.C226.tor.veloc 00:c0:4f:94:82:d3 UHLW0 385ep0 479 H31.C226.tor.veloc ff:ff:ff:ff:ff:ff UHLWb 2 57ep0 Thanks all for taking the time in reading my email. Cheers, Jay ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Can't ping, ssh, ftp INTO new install
I'm fairly new with FreeBSD and am having one of the most frustrating problems I've ever had setting up a machine. Ran a fairly basic install. I can use Mozilla on the internet okay. Have sshd going. I can't get into the machine from the OS X box sitting right next to it on my desk. I've set the BSD box to be 10.0.0.3. The OS X box is at 10.0.0.2. Accessing the outside world through DSL router at 10.0.0.1 Tried through a hub - no luck. Tried through a xover cable straight between the mac and BSD - no luck. Tried ping, ssh, ftp, http - no luck. Tried reinstalling - no luck. Yet, I can surf the net? One more oddity. When I ping from the BSD box to other local machines on my network, I get DUP! responses from my public IP address, even though there are only three ports on the mac that are public through NAT on my router. I don't get this behavior when pinging from other machines. I'm assuming my NIC is bad, but why am I able to get on-line? This makes no sense. I swear it was working at one point a few weeks back. Any suggestions? Thanks, Heath ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Can't ping, ssh, ftp INTO new install
On Sun, 12 Oct 2003, Heath Volmer wrote: I'm fairly new with FreeBSD and am having one of the most frustrating problems I've ever had setting up a machine. Ran a fairly basic install. I can use Mozilla on the internet okay. Have sshd going. I can't get into the machine from the OS X box sitting right next to it on my desk. I've set the BSD box to be 10.0.0.3. The OS X box is at 10.0.0.2. Accessing the outside world through DSL router at 10.0.0.1 Try doing an ifconfig and check the netmask on all of them matches Rus -- w: http://www.jvds.com | Just Virtual Dedicated Servers e: [EMAIL PROTECTED]| banners: http://www.jvds.com/banners.php t: +44 7919 373537 | t: 1-888-327-6330 | email: [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
pppoe, can't ping tun0 from dmz machine
I've acquired DSL. I didn't like the modem's NAT and PPPoE, so I switched it to bridged Ethernet and am using ppp(8) for that. I'm using ipfw2 for QOS things (pipes and queues). I'm using ipf for firewalling and ftp proxying. Almost everything works well, except (so far) active FTP and pinging the tun0 interface. tcpdump shows ICMP echo requests and responses, but ping does not see them. Opening ipf (pass in all, pass out all) fixes ping. ipfnat's active ftp proxy sees the PORT request and punches a hole through the firewall, but incoming packets don't arrive. Opening ipf fixes this, too. Other incoming connections seem to work fine. DNS works fine. TCP works fine. I've read the handbook, the howtos, searched the list archives, usenet, and the web. Nothing solved it. So. What have I overlooked? Where have I gone wrong? Would you like to see my cling-film collection? How about an extensive (but perhaps not exhaustive) excerpt from my system configuration? Ok, it is included. -- Rocco Caputo - [EMAIL PROTECTED] - http://poe.perl.org/ === ppp.conf default: ident user-ppp VERSION (built COMPILATIONDATE) set log CBCP CCP Chat Connect Command IPCP tun Phase Warning papchap: add default HISADDR disable ipv6cp disable vjcomp enable iface-alias enable lqr enable tcpmssfixup nat enable yes nat log yes nat same_ports yes set authkey * set authname* set cd 5 set crtscts off set device PPPoE:dc0 set dia set ifaddr 68.213.211.142/0 192.168.36.176/0 set login set mru 1492 set mtu 1492 set redial 1 0 set server /var/run/tun0 0177 set speed sync set timeout 0 === netstat -rn Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire default192.168.36.176 UGSc 80 1377475 tun0 10 link#2 UC 40rl0 10.0.0.7 link#2 UHLW08rl0 10.0.0.18 00:e0:18:0b:ac:22 UHLW1 115334rl0303 10.0.0.25 00:e0:18:30:68:32 UHLW0 292874lo0 10.0.0.100 00:e0:18:30:65:f6 UHLW1 111019rl0163 127.0.0.1 127.0.0.1 UH 6 196295lo0 192.168.1 link#1 UC 20dc0 192.168.1.25 00:04:5a:59:8e:92 UHLW0 142112lo0 192.168.1.254 00:60:0f:31:c7:86 UHLW075153dc0865 192.168.36.176 68.213.211.142 UH 7671059 tun0 === ipfstat -i block in quick on tun0 from 0.0.0.0/8 to any block in quick on tun0 from 127.0.0.0/8 to any block in quick on tun0 from 169.254.0.0/16 to any block in quick on tun0 from 172.16.0.0/12 to any block in quick on tun0 from 192.0.2.0/24 to any block in quick on tun0 from 192.168.0.0/16 to any block in quick on tun0 from 224.0.0.0/4 to any block in quick on tun0 from 240.0.0.0/4 to any pass in quick on lo0 from any to any pass in quick on rl0 from any to any pass in quick on dc0 from any to any pass in quick on tun0 proto tcp from any to any port = 80 flags S/FSRPAU keep state keep frags pass in quick on tun0 proto tcp from any to any port = 113 flags S/FSRPAU keep state keep frags pass in quick on tun0 proto tcp from any to any port = 433 flags S/FSRPAU keep state keep frags pass in quick on tun0 proto tcp from any to any port 6881 6999 flags S/FSRPAU keep state keep frags pass in quick on tun0 proto tcp from any to any port = 11512 flags S/FSRPAU keep state keep frags pass in quick on tun0 proto tcp from any to any port 32000 32100 flags S/FSRPAU keep state keep frags block in quick from any to any === ipfstat -o block out quick on tun0 from 0.0.0.0/8 to any block out quick on tun0 from 127.0.0.0/8 to any block out quick on tun0 from 169.254.0.0/16 to any block out quick on tun0 from 172.16.0.0/12 to any block out quick on tun0 from 192.0.2.0/24 to any block out quick on tun0 from 192.168.0.0/16 to any block out quick on tun0 from 224.0.0.0/4 to any block out quick on tun0 from 240.0.0.0/4 to any pass out quick on lo0 from any to any pass out quick on rl0 from any to any pass out quick on dc0 from any to any pass out quick on tun0 proto icmp from any to any keep state pass out quick on tun0 proto tcp from any to any flags S/FSRPAU keep state keep frags pass out quick on tun0 proto udp from any to any keep state keep frags block out quick from any to any === ipnat -l List of active MAP/Redirect filters: map tun0 68.213.211.142/32 - 68.213.211.142/32 proxy port ftp ftp/tcp List of active sessions: (none) === various rc.conf bits ifconfig_dc0=inet 192.168.1.25 netmask 255.255.255.0 network_interfaces=lo0 rl0 dc0 tun0 firewall_enable=YES firewall_logging=YES firewall_type=/etc/rc.firewall.custom firewall_flags=-p /usr/bin/cpp ipfilter_enable=YES
