I am having errors during a make buildworld command. Just did a CVSUP
this morning. Does anyone know what this means?
DMESG Output
mordor# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RC #5: Tue Sep 30 06:12:34 PDT 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FIREWALL
Timecounter i8254 frequency 1193182 Hz
CPU: Intel(R) Celeron(TM) CPU1200MHz (1196.81-MHz
686-class CPU)
Origin = GenuineIntel Id = 0x6b4 Stepping = 4
Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory = 1342111744 (1310656K bytes)
avail memory = 1296916480 (1266520K bytes)
Preloaded elf kernel kernel at 0xc058.
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc04d8542 (122)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fc3e0
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: ServerWorks NB6635 3.0LE host to PCI bridge on motherboard
pci0: PCI bus on pcib0
fxp0: Intel 82559 Pro/100 Ethernet port 0xecc0-0xecff mem
0xfe00-0xfe0f,0xfe102000-0xfe102fff irq 11 at device 2.0 on pci0
fxp0: Ethernet address 00:c0:9f:12:0a:e2
inphy0: i82555 10/100 media interface on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: 3Com 3c905-TX Fast Etherlink XL port 0xec80-0xecbf irq 10 at device
10.0 on pci0
xl0: Ethernet address: 00:60:08:aa:7f:1b
miibus1: MII bus on xl0
nsphy0: DP83840 10/100 media interface on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: ATI Mach64-GR graphics accelerator at 11.0
isab0: PCI to ISA bridge (vendor=1166 device=0201) at device 15.0 on pci0
isa0: ISA bus on isab0
atapci0: ServerWorks CSB5 ATA100 controller port
0x8c0-0x8c3,0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: OHCI (generic) USB controller mem 0xfe10-0xfe100fff irq 5 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: OHCI (generic) USB controller on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: ServerWorks NB6635 3.0LE host to PCI bridge on motherboard
pci1: PCI bus on pcib1
ahc0: Adaptec 29160 Ultra160 SCSI adapter port 0xdc00-0xdcff mem
0xf900-0xf9000fff irq 3 at device 3.0 on pci1
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pcib2: Host to PCI bridge on motherboard
pci2: PCI bus on pcib2
orm0: Option ROMs at iomem 0xc-0xc7fff,0xec000-0xe on isa0
pmtimer0 on isa0
fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5 drive on fdc0 drive 0
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0
sc0: System console at flags 0x100 on isa0
sc0: VGA 16 virtual consoles, flags=0x300
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: PLIP network interface on ppbus0
lpt0: Printer on ppbus0
lpt0: Interrupt-driven port
ppi0: Parallel I/O on ppbus0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ad1: 38146MB WDC WD400BB-18DEA0 [77504/16/63] at ata0-slave UDMA100
ad2: 114473MB WDC WD1200AB-00CBA1 [232581/16/63] at ata1-master UDMA100
ad3: 114473MB WDC WD1200AB-00CBA1 [232581/16/63] at ata1-slave UDMA100
acd0: CDROM SAMSUNG CD-ROM SC-148C at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: SONY SDT-9000 125F Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/ad1s1a
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
usb0: scheduling overrun
Tail Output from the make buildworld command
rm -f /usr/obj/usr/src/i386/usr/lib/compat/liby.so
/usr/obj/usr/src/i386/usr/lib/liby.so.2.0
/usr/obj/usr/src/i386/usr/lib/compat/liby.so.2.0
/usr/obj/usr/src/i386/usr/lib/compat/liby.so.2
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 liby.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 liby_p.a
/usr/obj/usr/src/i386/usr/lib
=== lib/libz
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libz.a
/usr/obj/usr/src/i386/usr/lib
sh
