I can't install netperf
When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? Pleas someone help me! I reaaly need to do this works fast! João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? cd /usr/ports/benchmark/netperf make install clean Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
I already have downloaded netperf. I need to run configure before compile. But i got that error. You have installed netperf before? Em 09/06/2005, às 12:23, Paul Schmehl escreveu: --On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? cd /usr/ports/benchmark/netperf make install clean Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
João Gabriel Sapucahy Chiste wrote: I already have downloaded netperf. I need to run configure before compile. But i got that error. You have installed netperf before? He is suggesting that you install it from the ports tree, rather than downloading the source and compiling it. --Tim Erlin Em 09/06/2005, às 12:23, Paul Schmehl escreveu: --On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? cd /usr/ports/benchmark/netperf make install clean Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
I don't have a internet connection on this machine... But i think if i install using ports i will get the same error that i get compiling, don't you think? Em 09/06/2005, às 14:26, Tim Erlin escreveu: João Gabriel Sapucahy Chiste wrote: I already have downloaded netperf. I need to run configure before compile. But i got that error. You have installed netperf before? He is suggesting that you install it from the ports tree, rather than downloading the source and compiling it. --Tim Erlin Em 09/06/2005, às 12:23, Paul Schmehl escreveu: --On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? cd /usr/ports/benchmark/netperf make install clean Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
I put the netperf-2.4.0.tar.gz in the location that ports telling and tried to install from ports and then i get this: applying freebsd patchesblabla File to patch: Which file should i type? Em 09/06/2005, às 14:26, Tim Erlin escreveu: João Gabriel Sapucahy Chiste wrote: I already have downloaded netperf. I need to run configure before compile. But i got that error. You have installed netperf before? He is suggesting that you install it from the ports tree, rather than downloading the source and compiling it. --Tim Erlin Em 09/06/2005, às 12:23, Paul Schmehl escreveu: --On Thursday, June 09, 2005 11:26:06 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: When i run ./configure to install netperf i get this error: failed to get size of sin_port in struct sockaddr_in. What can i do to solve this? cd /usr/ports/benchmark/netperf make install clean Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 14:17:34 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: I already have downloaded netperf. I need to run configure before compile. But i got that error. You have installed netperf before? No, but I've installed a *ton* of apps from ports, and I'm a port maintainer. I strongly suggest you use the ports system. All the compatibility and porting issues are already taken care of for you. Just delete what you downloaded, cd to /usr/ports/benchmark/netperf/ and type make install clean at the commandline, and netperf will install just fine, I'm sure. If you want to know if there are any available options, read the Makefile in the netperf directory. Why reinvent the wheel? Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 15:10:11 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: I put the netperf-2.4.0.tar.gz in the location that ports telling and tried to install from ports and then i get this: applying freebsd patchesblabla File to patch: Which file should i type? You can't do it that way. First, you need to make sure your ports are up to date. *Then* install netperf using the port. (I just did, on 5.4 RELEASE, and it installed without a hitch.) The port installed netperf-2.3pl1.tar.gz, not netperf-2.4.0.tar.gz. If you want 2.4.0, you're on your own, and you'll have to figure out how to get it to compile on FreeBSD. The netperf Makefile *might* be helpful. It might also be helpful to look at the port files after typing make. You'll find that there are 14 patchfiles in the files/ directory and a configure script in the scripts/ directory. I'm betting you can't compile this port yourself, unless you're a programmer and you understand configure and Makefile instructions clearly. Or maybe you can - but you're pretty much on your own. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
I'm a programmer but i'm still not compiled this stuff I`m on a Lan with a DHCP server and i can ping but the DNS names are not configured i put them in resolv.conf but don't worked. When i run dhclient i get an ip address, but i get this message addres family not supported by protocol family. Em 09/06/2005, às 15:59, Paul Schmehl escreveu: --On Thursday, June 09, 2005 15:10:11 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: I put the netperf-2.4.0.tar.gz in the location that ports telling and tried to install from ports and then i get this: applying freebsd patchesblabla File to patch: Which file should i type? You can't do it that way. First, you need to make sure your ports are up to date. *Then* install netperf using the port. (I just did, on 5.4 RELEASE, and it installed without a hitch.) The port installed netperf-2.3pl1.tar.gz, not netperf-2.4.0.tar.gz. If you want 2.4.0, you're on your own, and you'll have to figure out how to get it to compile on FreeBSD. The netperf Makefile *might* be helpful. It might also be helpful to look at the port files after typing make. You'll find that there are 14 patchfiles in the files/ directory and a configure script in the scripts/ directory. I'm betting you can't compile this port yourself, unless you're a programmer and you understand configure and Makefile instructions clearly. Or maybe you can - but you're pretty much on your own. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 17:12:39 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: I'm a programmer but i'm still not compiled this stuff I`m on a Lan with a DHCP server and i can ping but the DNS names are not configured i put them in resolv.conf but don't worked. When i run dhclient i get an ip address, but i get this message addres family not supported by protocol family. Seems like you should resolve this problem first, before trying to install more software. I'm not sure I'm following you though. If you put your DNS servers' IP addresses in resolv.conf, then you shouldn't be having a problem with name resolution. What's generating the family not supported error? Ping? Did you enable IPV6 on this box? Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? Em 09/06/2005, às 17:21, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:12:39 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: I'm a programmer but i'm still not compiled this stuff I`m on a Lan with a DHCP server and i can ping but the DNS names are not configured i put them in resolv.conf but don't worked. When i run dhclient i get an ip address, but i get this message addres family not supported by protocol family. Seems like you should resolve this problem first, before trying to install more software. I'm not sure I'm following you though. If you put your DNS servers' IP addresses in resolv.conf, then you shouldn't be having a problem with name resolution. What's generating the family not supported error? Ping? Did you enable IPV6 on this box? Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
i have a problem resolving names when i give ping www i get host name lookup failure and when i run dig i get connection refused Em 09/06/2005, às 17:32, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
João Gabriel Sapucahy Chiste wrote: i have a problem resolving names when i give ping www i get host name lookup failure and when i run dig i get connection refused Can you ping the DNS server by IP? --Tim Erlin Em 09/06/2005, às 17:32, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
yes now i realized that i can't create resolv.conf...:( I get this message: out of inodes. unable to create resolv.conf Em 09/06/2005, às 17:49, Tim Erlin escreveu: João Gabriel Sapucahy Chiste wrote: i have a problem resolving names when i give ping www i get host name lookup failure and when i run dig i get connection refused Can you ping the DNS server by IP? --Tim Erlin Em 09/06/2005, às 17:32, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
now i get the dns working but i need to know where i put the router address, because the dhcp it's not working. Em 09/06/2005, às 17:49, Tim Erlin escreveu: João Gabriel Sapucahy Chiste wrote: i have a problem resolving names when i give ping www i get host name lookup failure and when i run dig i get connection refused Can you ping the DNS server by IP? --Tim Erlin Em 09/06/2005, às 17:32, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
Now i get the network ok and ports working, i tried with other softwares but i can't download netperf because i have messed up with distinfo, what you have in this file? Em 09/06/2005, às 17:32, Paul Schmehl escreveu: --On Thursday, June 09, 2005 17:28:14 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Should i enable ipv6? i see a inet6 address when i give ifconfig. It's that enough? No, not unless your network uses it, which is unlikely. It's normal for ifconfig to report the ipv6 address as well as the ipv4 address. Can you describe the problem you're having more accurately? I'm not sure what is wrong, except that you seem to be having a problem resolving names. Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
--On Thursday, June 09, 2005 19:44:20 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Now i get the network ok and ports working, i tried with other softwares but i can't download netperf because i have messed up with distinfo, what you have in this file? MD5 (netperf-2.3pl1.tar.gz) = b74314d78af31cb13516fb9a372d2e86 SIZE (netperf-2.3pl1.tar.gz) = 836110 Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
now says that i need to edit makefile to my plataform... :( Em 09/06/2005, às 19:54, Paul Schmehl escreveu: --On Thursday, June 09, 2005 19:44:20 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Now i get the network ok and ports working, i tried with other softwares but i can't download netperf because i have messed up with distinfo, what you have in this file? MD5 (netperf-2.3pl1.tar.gz) = b74314d78af31cb13516fb9a372d2e86 SIZE (netperf-2.3pl1.tar.gz) = 836110 Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I can't install netperf
Uhuhu i finally get this thing working, thanks i lot Paul :D Sorry for i'm beeing so newbie and annoying. []'s Em 09/06/2005, às 20:37, João Gabriel Sapucahy Chiste escreveu: now says that i need to edit makefile to my plataform... :( Em 09/06/2005, às 19:54, Paul Schmehl escreveu: --On Thursday, June 09, 2005 19:44:20 -0300 João Gabriel Sapucahy Chiste [EMAIL PROTECTED] wrote: Now i get the network ok and ports working, i tried with other softwares but i can't download netperf because i have messed up with distinfo, what you have in this file? MD5 (netperf-2.3pl1.tar.gz) = b74314d78af31cb13516fb9a372d2e86 SIZE (netperf-2.3pl1.tar.gz) = 836110 Paul Schmehl ([EMAIL PROTECTED]) Adjunct Information Security Officer University of Texas at Dallas AVIEN Founding Member http://www.utdallas.edu/ir/security/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] João Gabriel Sapucahy Chiste ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
