IDE card reader

[David Lodeiro]

Hi all, 

I have an IDE card reader ( compact flash, secure digital, MMC, and memory 
stick) that I am trying to get to work. However when I start my system with 
it installed it crashes on boot up. 

This is what it outputs

Fatal trap 12: page fault while in kernel mode
fault virual address= 0x4b
fault code  = supervisor write, page not present
instruction pointer = 0x8:0xc03558bc
stack pointer   = 0x10:0xd6aa6c 54
frame pointer   = 0x10:0xd6aa6c 58
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gram 1
processor eflags= interrupt enabled, resume, IOPL=0
current process = 24 (irq15: ata1)
trap number = 12
panic: page fault

and it then gives the option to pause or reeboot.

If I boot up with a SD card in the reader, I get the exact same message, but 
with the following just before it:

afd0: MODE_SENSE_BIG - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x04

and it repeats this 4 times

If anyone can give me any info, explanation as to what is happenening, a link 
to another site, anything, please let me know

Thanks in advance

David Lodeiro

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

IDE Card Reader

[David L]

I'm trying to use a IDE SD, MS, CF, SM card reader ( it slots into the 3.5 
inch floppy slot and uses an IDE port instead of USB ) on my FreeBSD 5.1 
Release system. This piece of hardware is not in any of the suppported 
hardware list but I thought Id place post this incase anyone has had any 
experience with them or can tell me what the error means. 

If I have the card reader installed ( detected by BIOS as a IOMEGA ZIP drive ) 
it reboots after probing all the devices, following is the dmesg.

pci0:  at device 11.0 (no driver attached)
pci0:  at device 12.0 (no driver attached)
fdc0:  port 
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0:  on ppc0
plip0:  on ppbus0
lpt0:  on ppbus0
lpt0: Interrupt-driven port
ppi0:  on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0:  port 0x64,0x60 irq 1 on acpi0
atkbd0:  flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0:  at iomem 0xd-0xd3fff,0xc-0xccfff on isa0
pmtimer0 on isa0
sc0:  at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0:  at port 0x3c0-0x3df iomem 0xa-0xb on isa0
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 57241MB  [116301/16/63] at ata1-master UDMA33
acd0: CD-RW  at ata0-master PIO4
acd1: DVD-ROM  at ata0-slave PIO4


Fatal trap 18: integer divide fault while in kernel mode
instruction pointer = 0x8:0xc01d4ee6
stack pointer   = 0x10:0xd67bcc60
frame pointer   = 0x10:0xd67bcca8
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process = 24 (irq15: ata1)
trap number = 18
panic: integer divide fault

If any more info is required please let me know

Thanks

David

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"