Re: Same error with all ports install!
Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
I want to direct the focus in the correct direction on this. Based on your described symptions, bad RAM is the _most_ likely cause. There are other things that could cause it, however. So _before_you_do_anything_else_, run memtest86. I recommend the standalone boot-from-CD version, as it's more thorough in its testing. Let it run for at least _8_ hours (or until you see errors). Any errors from memtest86 are bad. Even just a few errors per hour is unacceptable. If memtest86 produces errors, you can then start experimenting with different chips in different slots. After each change, use _memtest86_ to see if the problem is solved. I don't recommend using port compiles to test your RAM, it's not a reliable approach. Also, read the docs on memtest86. There's a lot of good advice on finding RAM problems. Garrett Cooper [EMAIL PROTECTED] wrote: Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] * This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Right. Bill nicely summed up what I've sort of been trying to say within a few paragraphs, quite nicely I might add. Cheers, -Garrett Bill Moran wrote: I want to direct the focus in the correct direction on this. Based on your described symptions, bad RAM is the _most_ likely cause. There are other things that could cause it, however. So _before_you_do_anything_else_, run memtest86. I recommend the standalone boot-from-CD version, as it's more thorough in its testing. Let it run for at least _8_ hours (or until you see errors). Any errors from memtest86 are bad. Even just a few errors per hour is unacceptable. If memtest86 produces errors, you can then start experimenting with different chips in different slots. After each change, use _memtest86_ to see if the problem is solved. I don't recommend using port compiles to test your RAM, it's not a reliable approach. Also, read the docs on memtest86. There's a lot of good advice on finding RAM problems. Garrett Cooper [EMAIL PROTECTED] wrote: Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Hello Bill, Hello Garrett, First I would like to thank you for the support and time you are giving me and to everyone. Yes I ran memtest86 from a bootable cd on the two DDR chipsets and after like 10+ hours It found 3 errors! is it reasnable? Anyhow I replaced the two DDR with diffrent 1 256 DDR chipset and it start to give the error I wrote in my email. But I didnot run the memtest86 on the new RAM (well it not brand new) i had it somewhere. I will run the memtest86 on the new installed ram, and let you know. Thank you again. Marwan. I want to direct the focus in the correct direction on this. Based on your described symptions, bad RAM is the _most_ likely cause. There are other things that could cause it, however. So _before_you_do_anything_else_, run memtest86. I recommend the standalone boot-from-CD version, as it's more thorough in its testing. Let it run for at least _8_ hours (or until you see errors). Any errors from memtest86 are bad. Even just a few errors per hour is unacceptable. If memtest86 produces errors, you can then start experimenting with different chips in different slots. After each change, use _memtest86_ to see if the problem is solved. I don't recommend using port compiles to test your RAM, it's not a reliable approach. Also, read the docs on memtest86. There's a lot of good advice on finding RAM problems. Garrett Cooper [EMAIL PROTECTED] wrote: Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] * This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
On Sun, Apr 23, 2006 at 05:27:45PM +, Marwan Sultan wrote: Hello Bill, Hello Garrett, First I would like to thank you for the support and time you are giving me and to everyone. Yes I ran memtest86 from a bootable cd on the two DDR chipsets and after like 10+ hours It found 3 errors! is it reasnable? If memtest86 shows *any* errors it means that the RAM does not work as it should and you should expect you system to crash or otherwise misbehave at inopportune moments. If you run memtest86 for a long time (24 hours or more) and it does not show any errors then the memory probably good. If memtest86 shows any error (not matter if it is after 2 minutes or after 2 days) then there is definitely a problem with the memory. (It might be the CPU which is bad also, but that is rare.) Anyhow I replaced the two DDR with diffrent 1 256 DDR chipset and it start to give the error I wrote in my email. But I didnot run the memtest86 on the new RAM (well it not brand new) i had it somewhere. I will run the memtest86 on the new installed ram, and let you know. If you can adjust the memory timings in BIOS (which is usually possible) check that they are not set too optimistically. Trying to run RAM at speeds it is not built for will generally make it unstable. Check also that your system has sufficient cooling (especiall the CPU, but also other components like harddisks or graphics card.) Overheating can often make electronic components misbehave. Thank you again. Marwan. I want to direct the focus in the correct direction on this. Based on your described symptions, bad RAM is the _most_ likely cause. There are other things that could cause it, however. So _before_you_do_anything_else_, run memtest86. I recommend the standalone boot-from-CD version, as it's more thorough in its testing. Let it run for at least _8_ hours (or until you see errors). Any errors from memtest86 are bad. Even just a few errors per hour is unacceptable. If memtest86 produces errors, you can then start experimenting with different chips in different slots. After each change, use _memtest86_ to see if the problem is solved. I don't recommend using port compiles to test your RAM, it's not a reliable approach. Also, read the docs on memtest86. There's a lot of good advice on finding RAM problems. Garrett Cooper [EMAIL PROTECTED] wrote: Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The
Re: Same error with all ports install!
Marwan Sultan wrote: Hello Bill, Hello Garrett, First I would like to thank you for the support and time you are giving me and to everyone. Yes I ran memtest86 from a bootable cd on the two DDR chipsets and after like 10+ hours It found 3 errors! is it reasnable? Anyhow I replaced the two DDR with diffrent 1 256 DDR chipset and it start to give the error I wrote in my email. But I didnot run the memtest86 on the new RAM (well it not brand new) i had it somewhere. I will run the memtest86 on the new installed ram, and let you know. Thank you again. Marwan. I want to direct the focus in the correct direction on this. Based on your described symptions, bad RAM is the _most_ likely cause. There are other things that could cause it, however. So _before_you_do_anything_else_, run memtest86. I recommend the standalone boot-from-CD version, as it's more thorough in its testing. Let it run for at least _8_ hours (or until you see errors). Any errors from memtest86 are bad. Even just a few errors per hour is unacceptable. If memtest86 produces errors, you can then start experimenting with different chips in different slots. After each change, use _memtest86_ to see if the problem is solved. I don't recommend using port compiles to test your RAM, it's not a reliable approach. Also, read the docs on memtest86. There's a lot of good advice on finding RAM problems. Garrett Cooper [EMAIL PROTECTED] wrote: Marwan, Did you run memtest86+? That is the true tell-tale sign that something RAM-related does or does not work. You may also have a bad slot on your motherboard, so moving the RAM around to try and get it to work is a good way to troubleshoot your given issue in compiling things. If you do move the RAM chip, make sure to firmly place it in its destination slot. If you don't your computer will report errors with the RAM chip, which are erroneous to the problem that you currently have. HTH, -Garrett On Apr 23, 2006, at 7:58 AM, Marwan Sultan wrote: Hello there, Sorry for disturb, I have changed the RAM to diffrent 256 1 chipset DDR. and now, whenever I compile any port the following error shows, cc: Internal error: Segmentation fault: 11 (program as) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 For whatever port! Any Advise? is it a PC problem? not BSD? Marwan Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] * This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses. -- Bill Moran Potential Technologies http://www.potentialtech.com What I would do next is take a look in the system event log in your BIOS and see if there are any logs about bad RAM access. Next, I would grab your Dell Resource CD and run the memory tests to see if it may be the bus or
Re: Same error with all ports install!
Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan Check your RAM. It sounds like bad values are being stored somewhere and it's affecting your overall performance on the machine since the first message was about your kernel and the second message was about gcc (one the available compilers for FreeBSD). Try memtest86+ (http://www.memtest86.com/). -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK -- I have never been one to sacrifice my appetite on the altar of appearance. -- A. M. Readyhough ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Same error with all ports install!
Marwan Sultan wrote: Its 2 chipset RAM, each 256DDR total 512 Running on Dell Optiplex Gx260. P4 2.5 Do you think ram has something wrong! ? it should be like one ram chipset? has the problem? I'll try them one at a time, Thanks for the advise, Thanks kevin, thanks Garrett Marwan Sultan wrote: Hello Guys, I fresh installed FreeBSD 6.0R some wierd stuff going on! Firts: the box restarted from it self like 4 times, and /var/log/messages showing only one strange line (for me) which is Apr 22 01:10:46 box kernel: pid 5764 (cc1), uid 0: exited on signal 6 (core dumped) then i ran fsck, it cleared some files, now its not restarting but, i'm not sure it will or it will not. second problem: whenever i try to install any port, it gave an error msg during the make says: cc1 in free(): error: junk pointer, too high to make sense cc1 in malloc(): error: recursive call cc: Internal error: Abort trap: 6 (program cc1) Please submit a full bug report. See URL:http://gcc.gnu.org/bugs.html for instructions. *** Error code 1 Anyone could Advise please? Marwan How many RAM chips? Try them one at a time... KDK Another thing: Check the capacitors on your motherboard. If they the tops are swelling (tops are not flat) or bursting (emitting yellow/orange dialectric) on the capacitors around the RAM/CPU, it's time to either call Dell or get a new machine. The fault with bad capacitors is a well known quality control problem and if you search google for those terms, maybe you can get some more information as to what it is and why it occurs. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
