Re: atapicam, cdrecord, and my gaping clue deficiency
On Friday 15 October 2004 05:32, Peter Seebach wrote: Hardware: SuperMicro X5DE8-GG motherboard, dual Xeon 2.8Ghz, 2GB memory. Using onboard SCSI controller for disks, onboard IDE for DVD burner. DVD burner is a Pioneer DVR-108. Software: cdrecord and/or cdrecord-ProDVD. Problem: CD burning Always Fails. Failure mode is 100% repeatable and consistent: cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 55 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s write track data: error after 698368 bytes Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00 Mr. Schilling says Install a non-defective kernel. I am assuming that this doesn't mean some other OS. Googling around on the CDB bytes turns up lots of people with cabling problems, especially on SCSI busses. Googling around on FreeBSD and 698368 turns up someone who needed the P1003_1B option added to a kernel. (It's now just the _KPOSIX option, and it's already in there.) I got as far as putting in the atapicam and related devices. This happens whether or not I leave the atapicd driver in place. (dmesg output below is without.) I enclose dmesg and config file as attachments for perusal. I am Very Worried by the observation that the CD is claiming a 3.300MB/sec transfer rate: cd0 at ata0 bus 0 target 0 lun 0 cd0: PIONEER DVD-RW DVR-108 1.10 Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers Hi, I'm having _exactly_ the same problem... :-( Mine is a Pioneer DVR-107D, firmware v1.18 on a 5.2.1-REL-p11. dmesg : cd1 at ata1 bus 0 target 0 lun 0 cd1: PIONEER DVD-RW DVR-107D 1.18 Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers. I got the same reply from mr. Schilling and I haven't found any solution yet... Could it be something with the drives/firmware ? Beni. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: atapicam, cdrecord, and my gaping clue deficiency
In message [EMAIL PROTECTED], FreeBsdBeni writes: I'm having _exactly_ the same problem... :-( Mine is a Pioneer DVR-107D, firmware v1.18 on a 5.2.1-REL-p11. dmesg : cd1 at ata1 bus 0 target 0 lun 0 cd1: PIONEER DVD-RW DVR-107D 1.18 Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers. I got the same reply from mr. Schilling and I haven't found any solution yet... Could it be something with the drives/firmware ? What's your motherboard? Mine's a SuperMicro X5DE8-GG. And... With FreeBSD 5.3beta7, it works fine. I found one other reference to problems with the ServerWorks CSB6 chipset under FreeBSD 5.2.1. Anyway, upgrading to 5.3beta7 made my problem go away, as well as my mysterious bus errors. (And before anyone says bad memory, yes, I know; I ran memtest for a day, ran burnMMX and burnP6 several times at once for a day, and the machine has ECC, and has no events in the event log.) (I can't do any more testing, I'm afraid, as the machine has been shipped away, now that it's working.) -s ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: atapicam, cdrecord, and my gaping clue deficiency
On Friday 15 October 2004 21:35, Peter Seebach wrote: In message [EMAIL PROTECTED], FreeBsdBeni writes: I'm having _exactly_ the same problem... :-( Mine is a Pioneer DVR-107D, firmware v1.18 on a 5.2.1-REL-p11. dmesg : cd1 at ata1 bus 0 target 0 lun 0 cd1: PIONEER DVD-RW DVR-107D 1.18 Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers. I got the same reply from mr. Schilling and I haven't found any solution yet... Could it be something with the drives/firmware ? What's your motherboard? Mine's a SuperMicro X5DE8-GG. Mainboard : Medion MD 8088 (MSI MS-7048) Chipset : Intel 865PE And - unfortunately - all works fine under WinXP... And... With FreeBSD 5.3beta7, it works fine. Ok, will wait for the official 5.3 release in the next days then. I found one other reference to problems with the ServerWorks CSB6 chipset under FreeBSD 5.2.1. Anyway, upgrading to 5.3beta7 made my problem go away, as well as my mysterious bus errors. (And before anyone says bad memory, yes, I know; I ran memtest for a day, ran burnMMX and burnP6 several times at once for a day, and the machine has ECC, and has no events in the event log.) I've had no memory problems so far either. Beni. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: atapicam, cdrecord, and my gaping clue deficiency
In message [EMAIL PROTECTED], Peter Seebach write s: Problem: CD burning Always Fails. Failure mode is 100% repeatable and consistent: A followup: I have an HP DVD Writer dvd630i. 1. If I install only the DVD Writer dvd630i, as a master, the kernel panics and won't boot. 2. If I install both drives, with the HP as slave, the HP comes up at 33MB/sec and the Pioneer at 66MB/sec. In that configuration, the HP burns CDs just fine, but the Pioneer doesn't. So I'd just put the HP in the system. But it won't boot with just the HP! The last thing it says is ata1-slave: interrupt failed. This is odd, 'cuz the drive's set for master, and there is no slave. ??? -s ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]