Re: SLIP connection to Cisco CONSOLE...
On Wed, 3 Dec 2003 11:33 pm, Olaf Hoyer wrote: > Then use a standard terminal program like cu, tip, minicom or kermit to > connect at 9600 8N1 to the cisco. we find we need to turn flow control to none also... *shrug* -- Dr Paul van den Bergen Centre for Advanced Internet Architectures caia.swin.edu.au [EMAIL PROTECTED] IM:bulwynkl2002 "And some run up hill and down dale, knapping the chucky stones to pieces wi' hammers, like so many road makers run daft. They say it is to see how the world was made." Sir Walter Scott, St. Ronan's Well 1824 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SLIP connection to Cisco CONSOLE...
On Tue, 2 Dec 2003, Xpression wrote: > Hi all, I'm under FreeBSD-4.5, I've to made changes to a > Cisco2509 router, I've checked the handbook and I can get > any clues using the serial port to connect to the router, > anyone using it, or can give me any clues ??? Hi! Well, in normal cases you have two async (RS-232) Ports on the 2509, which are used to connect to a standard serial line. Most Ciscos use roll-over-cables (the supplied blue ones), you can also use a 9-pin rolling adapter from cyclades or sun netra on the Pc, and connect a standard straight CAT5-cable. Then use a standard terminal program like cu, tip, minicom or kermit to connect at 9600 8N1 to the cisco. HTH Olaf -- Olaf Hoyer[EMAIL PROTECTED] Fuerchterliche Erlebniss geben zu raten, ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist. (Nietzsche, Jenseits von Gut und Boese) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SLIP connection to Cisco CONSOLE...
> Hi all, I'm under FreeBSD-4.5, I've to made changes to a > Cisco2509 router, I've checked the handbook and I can get > any clues using the serial port to connect to the router, > anyone using it, or can give me any clues ??? Sure...try this: # su # cu -l /dev/cuaa0 (Note that cuaa0 is com1) Hope this helps, Steve > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
SLIP connection to Cisco CONSOLE...
Hi all, I'm under FreeBSD-4.5, I've to made changes to a Cisco2509 router, I've checked the handbook and I can get any clues using the serial port to connect to the router, anyone using it, or can give me any clues ??? ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"