Re: bind: Can't assign requested address using ssh (or anything else)
On Monday 21 January 2008 22:00:33 perlcat wrote: Trying to access a vpn using ssh on 6.2 - STABLE. Haven't found an answer anywhere, and so I must be totally missing the right questions to ask or configurations to look at. This problem is consistent regardless of port chosen or access method. I can duplicate at will with ssh. Here's the command that fails: $ ssh -X -N -L 127.0.0.3:13390:192.168.1.44:3390 [EMAIL PROTECTED] [EMAIL PROTECTED]'s password: bind: Can't assign requested address channel_setup_fwd_listener: cannot listen to port: 13390 Could not request local forwarding. Ofcourse it fails, you are trying to bind to address 127.0.0.3, however there is no such address assigned to a local network interface. Either: 1) change 127.0.0.3 to 127.0.0.1 You don't explain what this 127.0.0.3 is. 2) ifconfig lo0 add 127.3/32 HTH, Nikos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: bind: Can't assign requested address using ssh (or anything else) -- resolution
$ ssh -X -N -L 127.0.0.3:13390:192.168.1.44:3390 [EMAIL PROTECTED] [EMAIL PROTECTED]'s password: bind: Can't assign requested address channel_setup_fwd_listener: cannot listen to port: 13390 Could not request local forwarding. Ofcourse it fails, you are trying to bind to address 127.0.0.3, however there is no such address assigned to a local network interface. Either: You don't explain what this 127.0.0.3 is. This does it. 2) ifconfig lo0 add 127.3/32 Thanks for responding! The vpn software I need to use requires me to configure and bind a VPN connection from 127.0.0.x:port to the loopback. It is a handy way of grabbing an entirely unique IP that doesn't collide with whatever network you're on. Of course, it probably isn't the best idea if a bunch of different apps start to pull stuff like this -- but I wasn't the brainiac that came up with this idea. Anyway, it seems to be a fairly common way of doing this, so I'm explaining in detail to benefit future searches. Some methods (SSH) allow me to manually select the IP/port, so for my example I use it. Others (Juniper Networks) just go and pick the IP for me, and can assign any number of connections depending upon configuration. In a Windows world, since there're no controls and stupid things are allowed to happen, the IP address/port assignment is done on the fly, and you then have to view the active VPN connections to figure out what IP address/port are in use. With a real OS, privileged things like this need to be done by a privileged user before the client can assign to it. Since they don't change without human intervention (the number is permanent based upon the order they load -- 127.2, 127.3, etc.) and are assigned in a logical fashion, I should be able to bind the new addresses that it will use to lo0 and it should Just Work. And it does. tsclient can now load and get me onto the Windows Server I need to control. It's a hollow victory -- I feel so *dirty* when I work with Windows, but I have to if I want to get paid... The Juniper Network client info: ===setup information RDP Direct option: Remote Server: WINS server name Client Port: 33890 Server Port: 3389 == Restarted the Secure Application manager. =error info=== In the Secure Application Manager Window, when I click on the Details Tab. I see the application I added with an error: cannot bind to the port 33890. after ifconfig== Now it works. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
bind: Can't assign requested address using ssh (or anything else)
Trying to access a vpn using ssh on 6.2 - STABLE. Haven't found an answer anywhere, and so I must be totally missing the right questions to ask or configurations to look at. This problem is consistent regardless of port chosen or access method. I can duplicate at will with ssh. Here's the command that fails: $ ssh -X -N -L 127.0.0.3:13390:192.168.1.44:3390 [EMAIL PROTECTED] [EMAIL PROTECTED]'s password: bind: Can't assign requested address channel_setup_fwd_listener: cannot listen to port: 13390 Could not request local forwarding. I know that it can be done -- the guy next to me is working using Linux, but his answer to this issue was to edit the /etc/network/interfaces file. He figures that I didn't have one or don't have the loopback started. (his interfaces file): ~$ more /etc/network/interfaces auto lo iface lo inet loopback address 127.0.0.1 netmask 255.0.0.0 Here's my config info: == ifconfig output: smedley# ifconfig fwe0: flags=108802BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500 options=8VLAN_MTU ether 02:e0:b8:02:9c:8e ch 1 dma -1 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 72.37.126.77 netmask 0xff00 broadcast 72.37.126.255 ether 00:13:f7:35:39:5e media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/18Mbps) status: associated ssid UPRR_X channel 8 bssid 00:0f:90:7b:60:00 authmode OPEN privacy OFF txpowmax 36 bmiss 7 protmode CTS burst bintval 100 == rc.conf: hostname=smedley.alltel.net ifconfig_ath0=DHCP inetd_enable=YES keymap=us.iso moused_enable=YES linux_enable=YES sshd_enable=YES tcp_extensions=YES usbd_enable=YES nfs_client_enable=YES cupsd_enable=YES smartd_enable=YES == Maybe I need to get rid if the inet6 for the loopback? Thanks! Tyson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
bind: Can't assign requested address using ssh (or anything else)
Trying to access a vpn using ssh on 6.2 - STABLE. Haven't found an answer anywhere, and so I must be totally missing the right questions to ask or configurations to look at. This problem is consistent regardless of port chosen or access method. I can duplicate at will with ssh. Here's the command that fails: $ ssh -X -N -L 127.0.0.3:13390:192.168.1.44:3390 [EMAIL PROTECTED] [EMAIL PROTECTED]'s password: bind: Can't assign requested address channel_setup_fwd_listener: cannot listen to port: 13390 Could not request local forwarding. I know that it can be done -- the guy next to me is working using Linux, but his answer to this issue was to edit the /etc/network/interfaces file. He figures that I didn't have one or don't have the loopback started. (his interfaces file): ~$ more /etc/network/interfaces auto lo iface lo inet loopback address 127.0.0.1 netmask 255.0.0.0 Here's my config info: == ifconfig output: smedley# ifconfig fwe0: flags=108802BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT mtu 1500 options=8VLAN_MTU ether 02:e0:b8:02:9c:8e ch 1 dma -1 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 72.37.126.77 netmask 0xff00 broadcast 72.37.126.255 ether 00:13:f7:35:39:5e media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/18Mbps) status: associated ssid UPRR_X channel 8 bssid 00:0f:90:7b:60:00 authmode OPEN privacy OFF txpowmax 36 bmiss 7 protmode CTS burst bintval 100 == rc.conf: hostname=smedley.alltel.net ifconfig_ath0=DHCP inetd_enable=YES keymap=us.iso moused_enable=YES linux_enable=YES sshd_enable=YES tcp_extensions=YES usbd_enable=YES nfs_client_enable=YES cupsd_enable=YES smartd_enable=YES == Maybe I need to get rid if the inet6 for the loopback? Thanks! Tyson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
