On May 19, 2013, at 11:32 AM, Nikos Vassiliadis wrote:
> Hi,
>
> On 05/19/2013 04:57 PM, Joe wrote:
>> I create a ng bridge but issuing ifconfig does not show the bridge.
>> Running 9.1-RELEASE.
>> Is this a bug?
>
> ifconfig is not supposed to know about a netgraph bridge. So this is
> by design. Also, since the bridge is supposed to be transparent to the
> network i wouldn't know what kind of information would be relevant to
> ifconfig, that is the netgraph bridge has no MAC, no IP etc. What info
> are you after?
>
To see the upper/lower links to a bridge, you want to execute (as root):
ngctl ls -l
The output is a bit cluttered, as there's no empty newline between the headers
as it enumerates the different types.
Just as traditional "ls" you can give it a path, however the path is not
delimited by "/" but by ":" to separate the peers, etc.
Start small by trying to ls your bridge (and then ls -l your bridge). If memory
serves (on the go, so don't have a terminal to try this out before giving the
tip):
ngctl ls -l bridge0:
Should perhaps show the connected links.
When in doubt… go interactive…
ngctl
And try different combinations of "ls" and "ls -l" on the prompt.
--
Devin
_
The information contained in this message is proprietary and/or confidential.
If you are not the intended recipient, please: (i) delete the message and all
copies; (ii) do not disclose, distribute or use the message in any manner; and
(iii) notify the sender immediately. In addition, please be aware that any
message addressed to our domain is subject to archiving and review by persons
other than the intended recipient. Thank you.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
