Re: fusefs-sshfs
Dear Patrick, I'm running 7.1; I have /dev/fuse0. How did you do it? Roald On Aug 27, 2009, at 4:55 AM, patrick wrote: Which version of FreeBSD are you running? I just installed sshfs on 7.2, and while I didn't get it working right away, I did eventually do it. Do you have /dev/fuse0? Patrick On Mon, Aug 17, 2009 at 2:15 PM, Roald de Vries wrote: Dear all, I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. During startup, I see fusefs being started, but when I do: "sshfs remote:~ /media/remote", I get "fuse: failed to open fuse device: No such file or directory". Any idea why? Thanks in advance. Kind regards, Roald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org " ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: fusefs-sshfs
Dear Chris, Thanks for your reply. I've tried the absolute path as well, but no success :-(. Any other suggestions? Kind regards, Roald On Aug 18, 2009, at 10:17 AM, chris scott wrote: 2009/8/17 Roald de Vries Dear all, I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. During startup, I see fusefs being started, but when I do: "sshfs remote:~ /media/remote", I get "fuse: failed to open fuse device: No such file or directory". Any idea why? Thanks in advance. Kind regards, Roald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org " try an explicit path as well rather than ~ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: fusefs-sshfs
On Mon, Aug 17, 2009 at 11:15:16PM +0200, Roald de Vries wrote: > Dear all, > > I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. > During startup, I see fusefs being started, but when I do: "sshfs > remote:~ /media/remote", I get "fuse: failed to open fuse device: No > such file or directory". Any idea why? Thanks in advance. Try running these commands: kldload /usr/local/modules/fuse.ko /usr/local/etc/rc.d/fusefs start sysctl vfs.usermount=1 . . . then using an absolute path rather than a relative path. If that doesn't work, there's probably something wrong with the install, the network setup, or the remote machine. -- Chad Perrin [ original content licensed OWL: http://owl.apotheon.org ] Quoth Anonymous: "It is easier to measure something than to understand what you have measured." pgpVo3HWF3k3z.pgp Description: PGP signature
Re: fusefs-sshfs
Dear Adam, kldstat does list the appropriate module, and when I try to start it manually, I get the respons 'fusefs is already running'. Kind regards, Roald On Aug 18, 2009, at 3:45 AM, Adam Vande More wrote: On Mon, Aug 17, 2009 at 4:15 PM, Roald de Vries wrote: Dear all, I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. During startup, I see fusefs being started, but when I do: "sshfs remote:~ /media/remote", I get "fuse: failed to open fuse device: No such file or directory". Any idea why? Thanks in advance. Kind regards, Roald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org " does kldstat list the appropriate module? 151 0xcbe3a000 e000 fuse.ko start it manually: /usr/local/etc/rc.d/fusefs start -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: fusefs-sshfs
2009/8/17 Roald de Vries > Dear all, > > I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. > During startup, I see fusefs being started, but when I do: "sshfs remote:~ > /media/remote", I get "fuse: failed to open fuse device: No such file or > directory". Any idea why? Thanks in advance. > > Kind regards, > > Roald > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscr...@freebsd.org" > try an explicit path as well rather than ~ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: fusefs-sshfs
On Mon, Aug 17, 2009 at 4:15 PM, Roald de Vries wrote: > Dear all, > > I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. > During startup, I see fusefs being started, but when I do: "sshfs remote:~ > /media/remote", I get "fuse: failed to open fuse device: No such file or > directory". Any idea why? Thanks in advance. > > Kind regards, > > Roald > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscr...@freebsd.org" > does kldstat list the appropriate module? 151 0xcbe3a000 e000 fuse.ko start it manually: /usr/local/etc/rc.d/fusefs start -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
fusefs-sshfs
Dear all, I've installed fusefs-sshfs, and added fusefs_enable="YES" to rc.conf. During startup, I see fusefs being started, but when I do: "sshfs remote:~ /media/remote", I get "fuse: failed to open fuse device: No such file or directory". Any idea why? Thanks in advance. Kind regards, Roald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: fusefs-sshfs compilation error
Sorry All, this is a message for Dave. Dave, there is a problem to send an email message to your address (I'm not sure if it is a problem of my provider or yours but the problem exists): - Aug 18 00:20:33 bsam sendmail[1292]: l7HKKLkj001292: to="Dave" <[EMAIL PROTECTED]>, [EMAIL PROTECTED] (1001/0), delay=00:00:12, xdelay=00:00:11, mailer=relay, pri=62739, relay=mail.kuban.ru. [62.183.66.246], dsn=5.2.1, stat=User unknown Aug 18 00:20:33 bsam sendmail[1292]: l7HKKLkj001292: [EMAIL PROTECTED], [EMAIL PROTECTED] (1001/0), delay=00:00:12, xdelay=00:00:11, mailer=relay, pri=62739, relay=mail.kuban.ru. [62.183.66.246], dsn=2.0.0, stat=Sent (l7HKJv7q038694 Message accepted for delivery) - WBR -- bsam ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fusefs-sshfs compilation error
(restoring original cc: freebsd-questions@ as it may help someone to find an answer with a feedback) On Fri, 17 Aug 2007 15:52:35 -0400 Dave wrote: >Thanks for your suggestion. That did it. Everything installed fine > now. Now i get to do usage. Great, I'm happy to be useful. > Thanks. > Dave. > - Original Message - > From: "Boris Samorodov" <[EMAIL PROTECTED]> > To: "Dave" <[EMAIL PROTECTED]> > Cc: > Sent: Friday, August 17, 2007 9:35 AM > Subject: Re: fusefs-sshfs compilation error > > On Fri, 17 Aug 2007 06:26:15 -0400 Dave wrote: > > > >>I'm running 6.2 with a ports tree cvsupped and kernel sources from > >> about half an hour ago. > > > > Do you keep base system and kernel in sync? It's always a good idea. > > Did you compile and install the kernel? It's not a good idea use a > > recent kernel sources to build modules but use an old kernel itself. > > > >> I'm trying to install the > >> sysutils/fusefs-sshfs port. During the compilation of the dependency > >> fusefs-kmod i am getting an error that opt_global.h file can not be > >> found and compilation stops. > > > > You didn't show the platform. The output of "uname -a" is OK. > > And it's always a good idea to show the error message. (BTW usually > > two or tree good lines are showed followed by a full error message.) > > Did you try to locate the file? May be at another computer? Here it is > > for me: > > - > > srv# locate opt_global.h > > /usr/obj/usr/src/sys/GENERIC/opt_global.h > > - > > > >> For the fusefs-kmod port i did select > >> create a global autofile setup. > > > > I just tried to compile fusefs-kmod with a global autofile setup. It > > succeeded at: > > - > > # uname -a > > FreeBSD srv.sem.ipt.ru 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Jul 24 > > 19:30:05 MSD 2007 > > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 > > - > > > >> Any suggestions welcome. > > > > Since the file opt_global.h is found (at my system) only at /usr/obj > > directory I'd quess you dodn't have kernel sources and kernel binary > > at sinc (i.e. didn't compile the kernel after cvsupping). WBR -- bsam ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fusefs-sshfs compilation error
Boris Samorodov wrote: On Fri, 17 Aug 2007 06:26:15 -0400 Dave wrote: I'm running 6.2 with a ports tree cvsupped and kernel sources from about half an hour ago. Do you keep base system and kernel in sync? It's always a good idea. Did you compile and install the kernel? It's not a good idea use a recent kernel sources to build modules but use an old kernel itself. I'm trying to install the sysutils/fusefs-sshfs port. During the compilation of the dependency fusefs-kmod i am getting an error that opt_global.h file can not be found and compilation stops. You didn't show the platform. The output of "uname -a" is OK. And it's always a good idea to show the error message. (BTW usually two or tree good lines are showed followed by a full error message.) Did you try to locate the file? May be at another computer? Here it is for me: - srv# locate opt_global.h /usr/obj/usr/src/sys/GENERIC/opt_global.h - For the fusefs-kmod port i did select create a global autofile setup. I just tried to compile fusefs-kmod with a global autofile setup. It succeeded at: - # uname -a FreeBSD srv.sem.ipt.ru 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Jul 24 19:30:05 MSD 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 - Any suggestions welcome. Since the file opt_global.h is found (at my system) only at /usr/obj directory I'd quess you dodn't have kernel sources and kernel binary at sinc (i.e. didn't compile the kernel after cvsupping). HTH, WBR Just installed fine here. [EMAIL PROTECTED] fusefs-sshfs]$ uname -a FreeBSD zeus.agreenftp.no-ip.com 6.2-STABLE FreeBSD 6.2-STABLE #0: Thu Aug 9 17:11:53 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ZEUS i386 [EMAIL PROTECTED] fusefs-sshfs]$ pkg_info | grep fusefs fusefs-kmod-0.3.9.p1 Kernel module for fuse fusefs-libs-2.7.0_1 FUSE allows filesystem implementation in userspace fusefs-sshfs-1.8Mount remote directories over ssh ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fusefs-sshfs compilation error
On Fri, 17 Aug 2007 06:26:15 -0400 Dave wrote: >I'm running 6.2 with a ports tree cvsupped and kernel sources from > about half an hour ago. Do you keep base system and kernel in sync? It's always a good idea. Did you compile and install the kernel? It's not a good idea use a recent kernel sources to build modules but use an old kernel itself. > I'm trying to install the > sysutils/fusefs-sshfs port. During the compilation of the dependency > fusefs-kmod i am getting an error that opt_global.h file can not be > found and compilation stops. You didn't show the platform. The output of "uname -a" is OK. And it's always a good idea to show the error message. (BTW usually two or tree good lines are showed followed by a full error message.) Did you try to locate the file? May be at another computer? Here it is for me: - srv# locate opt_global.h /usr/obj/usr/src/sys/GENERIC/opt_global.h - > For the fusefs-kmod port i did select > create a global autofile setup. I just tried to compile fusefs-kmod with a global autofile setup. It succeeded at: - # uname -a FreeBSD srv.sem.ipt.ru 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Jul 24 19:30:05 MSD 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC amd64 - > Any suggestions welcome. Since the file opt_global.h is found (at my system) only at /usr/obj directory I'd quess you dodn't have kernel sources and kernel binary at sinc (i.e. didn't compile the kernel after cvsupping). HTH, WBR -- Boris Samorodov (bsam) Research Engineer, http://www.ipt.ru Telephone & Internet SP FreeBSD committer, http://www.FreeBSD.org The Power To Serve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
fusefs-sshfs compilation error
Hello, I'm running 6.2 with a ports tree cvsupped and kernel sources from about half an hour ago. I'm trying to install the sysutils/fusefs-sshfs port. During the compilation of the dependency fusefs-kmod i am getting an error that opt_global.h file can not be found and compilation stops. For the fusefs-kmod port i did select create a global autofile setup. Any suggestions welcome. Thanks. Dave. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fusefs-sshfs fails to compile
On Thu, 2007-04-26 at 17:16 -0600, Chad Perrin wrote: > I'm not sure why, but fusefs-sshfs refuses to compile on a Thinkpad R52 > running FreeBSD 6.2-RELEASE. I get the following when I try (watch the > line wrap after -qa on the second line): > > Stop in /usr/ports/sysutils/fusefs-sshfs. > ** Command failed [exit code 1]: /usr/bin/script -qa > /tmp/portinstall.19963.0 env make reinstall > ** Fix the installation problem and try again. > ** Listing the failed packages (*:skipped / !:failed) > ! sysutils/fusefs-sshfs (install error) > > There was a lot before that, of course, but I didn't want to dump it all > to the mailing list. The rest is posted online at: > > http://sob.apotheon.org/files/sshfs.fail.txt > > Thanks in advance for any help. > From the log: > cc -O2 -fno-strict-aliasing -pipe -I/usr/src/sbin/mount > -I../include -c mount_fusefs.c > mount_fusefs.c:47:21: mntopts.h: No such file or directory Verify that /usr/src/sbin/mount/mntopts.h exists. If it doesn't, freshen or fetch your sources (check the Handbook[1] for details) Tom [1] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html signature.asc Description: This is a digitally signed message part
fusefs-sshfs fails to compile
I'm not sure why, but fusefs-sshfs refuses to compile on a Thinkpad R52 running FreeBSD 6.2-RELEASE. I get the following when I try (watch the line wrap after -qa on the second line): Stop in /usr/ports/sysutils/fusefs-sshfs. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portinstall.19963.0 env make reinstall ** Fix the installation problem and try again. ** Listing the failed packages (*:skipped / !:failed) ! sysutils/fusefs-sshfs (install error) There was a lot before that, of course, but I didn't want to dump it all to the mailing list. The rest is posted online at: http://sob.apotheon.org/files/sshfs.fail.txt Thanks in advance for any help. -- CCD CopyWrite Chad Perrin [ http://ccd.apotheon.org ] "The ability to quote is a serviceable substitute for wit." - W. Somerset Maugham ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
