intel server board: strange LAN problem [SOLVED]
the original problem was: NIC1 was missing at all and PXE boot from this nic also did not work. the solution for those who are interested in: Intel SE7320VP2/SE7320VP2D2 has 2 onboard NIC's: NIC1 (Marvell Yukon-Chipset) NIC2 (Intel-Chipset) FreeBSD 6 by default recognizes the intel-nic, which is shown as em0. the 2nd nic needs an additional module from marvel yukon (if_myk.ko), which then will enable and show the nic to freebsd. the following steps have been successfully tested: - download the nic driver for freebsd from (www.marvell.com/drivers/) - install the if_myk.ko to /boot/kernel - load the module via /boot/loader.conf or kldload. - configure the interface with (ifconfig myk0) - get a new, fine 1GBit Ethernet Connection working ,-) cu have fun --- if you have this board, you definitely will ;-| ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
intel server board: strange LAN problem!
hi together! our intel server board SE7320VP2D2 has 2 onboard LAN interfaces. HW address .:40 and .:41. ifconfig -a on freebsd only shows the 2nd interface (:41) as em0 and the 1st interface is missing completely, as in the dmesg. any ideas on this? we need both interfaces, and this soon! and i definitely want to run freebsd on it ;-) tested (same symptoms) on: FreeBSD 6.0-RELEASE GENERIC FreeBSD 6.0-RELEASE [custom kernel, some modules removed, crypto() added] FreeBSD 6.1-BETA4 GENERIC dmesg of the BETA4-GENERIC: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-BETA4 #0: Tue Mar 14 13:59:38 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: A M I OEMAPIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf43 Stepping = 3 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x641dSSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,b14 AMD Features=0x2000LM Hyperthreading: 2 logical CPUs real memory = 2147274752 (2047 MB) avail memory = 2096422912 (1999 MB) ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: A M I OEMRSDT on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0 cpu0: ACPI CPU on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: unknown at device 0.1 (no driver attached) pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0 pci1: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge irq 16 at device 3.0 on pci0 pci2: ACPI PCI bus on pcib2 pci2: network, ethernet at device 0.0 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 28.0 on pci0 pci3: ACPI PCI bus on pcib3 amr0: LSILogic MegaRAID 1.53 mem 0xddff-0xddff irq 24 at device 1.0 on pci3 amr0: LSILogic Intel(R) RAID Controller SRCS16 Firmware 713Q, BIOS G401, 64MB RAM uhci0: UHCI (generic) USB controller port 0xcf00-0xcf1f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: UHCI (generic) USB controller port 0xcf80-0xcf9f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: UHCI (generic) USB controller on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: base peripheral at device 29.4 (no driver attached) pci0: base peripheral, interrupt controller at device 29.5 (no driver attached) ehci0: Intel 6300ESB USB 2.0 controller mem 0xdecffc00-0xdecf irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: Intel 6300ESB USB 2.0 controller on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered umass0: Kingston DataTraveler 2.0, rev 2.00/1.00, addr 2 pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci4: ACPI PCI bus on pcib4 pci4: display, VGA at device 2.0 (no driver attached) em0: Intel(R) PRO/1000 Network Connection Version - 3.2.18 port 0xee80-0xeebf mem 0xdefa-0xdefb irq 17 at device 3.0 on pci4 em0: Ethernet address: 00:0e:0c:6a:a6:41 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel 6300ESB UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_button0: Power Button on acpi0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: 16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: floppy drive controller (FDE) port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] pmtimer0 on isa0 orm0: ISA Option ROMs at iomem 0xc-0xc7fff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0 ppc0: parallel port not found. sc0: System console at flags
Re: intel server board: strange LAN problem!
Check the BIOS that both interfaces are enabled. -Derek At 07:23 AM 3/29/2006, [EMAIL PROTECTED]@mgEDV.net wrote: hi together! our intel server board SE7320VP2D2 has 2 onboard LAN interfaces. HW address .:40 and .:41. ifconfig -a on freebsd only shows the 2nd interface (:41) as em0 and the 1st interface is missing completely, as in the dmesg. any ideas on this? we need both interfaces, and this soon! and i definitely want to run freebsd on it ;-) tested (same symptoms) on: FreeBSD 6.0-RELEASE GENERIC FreeBSD 6.0-RELEASE [custom kernel, some modules removed, crypto() added] FreeBSD 6.1-BETA4 GENERIC dmesg of the BETA4-GENERIC: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-BETA4 #0: Tue Mar 14 13:59:38 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: A M I OEMAPIC Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf43 Stepping = 3 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x641dSSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,b14 AMD Features=0x2000LM Hyperthreading: 2 logical CPUs real memory = 2147274752 (2047 MB) avail memory = 2096422912 (1999 MB) ioapic0 Version 2.0 irqs 0-23 on motherboard ioapic1 Version 2.0 irqs 24-47 on motherboard npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: A M I OEMRSDT on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0 cpu0: ACPI CPU on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: unknown at device 0.1 (no driver attached) pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0 pci1: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge irq 16 at device 3.0 on pci0 pci2: ACPI PCI bus on pcib2 pci2: network, ethernet at device 0.0 (no driver attached) pcib3: ACPI PCI-PCI bridge at device 28.0 on pci0 pci3: ACPI PCI bus on pcib3 amr0: LSILogic MegaRAID 1.53 mem 0xddff-0xddff irq 24 at device 1.0 on pci3 amr0: LSILogic Intel(R) RAID Controller SRCS16 Firmware 713Q, BIOS G401, 64MB RAM uhci0: UHCI (generic) USB controller port 0xcf00-0xcf1f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: UHCI (generic) USB controller on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: UHCI (generic) USB controller port 0xcf80-0xcf9f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: UHCI (generic) USB controller on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: base peripheral at device 29.4 (no driver attached) pci0: base peripheral, interrupt controller at device 29.5 (no driver attached) ehci0: Intel 6300ESB USB 2.0 controller mem 0xdecffc00-0xdecf irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: Intel 6300ESB USB 2.0 controller on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered umass0: Kingston DataTraveler 2.0, rev 2.00/1.00, addr 2 pcib4: ACPI PCI-PCI bridge at device 30.0 on pci0 pci4: ACPI PCI bus on pcib4 pci4: display, VGA at device 2.0 (no driver attached) em0: Intel(R) PRO/1000 Network Connection Version - 3.2.18 port 0xee80-0xeebf mem 0xdefa-0xdefb irq 17 at device 3.0 on pci4 em0: Ethernet address: 00:0e:0c:6a:a6:41 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel 6300ESB UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_button0: Power Button on acpi0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: 16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: floppy drive controller (FDE) port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] pmtimer0 on isa0 orm0: ISA Option ROMs
RE: intel server board: strange LAN problem!
Check the BIOS that both interfaces are enabled. they are. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: intel server board: strange LAN problem!
Are both nics GB? or is one 100 MB? Are you running a custom kernel? If you hvae one that is 100 MB make sure you have a kernel with fxp support compiled in. you may need to add (if both nics are GB: network_interfaces=em0 em1 lo0 to your rc.conf or (if one is 100 MB) network_interfaces=em0 fxp0 lo0 -Derek At 08:15 AM 3/29/2006, [EMAIL PROTECTED]@mgEDV.net wrote: Check the BIOS that both interfaces are enabled. they are. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]