Re: ses device over T-SGPIO
Oh, that means you don't have SGPIO after all. If you do, you'll see entries like this: at scbus0 target 0 lun 0 (pass0,ada0) at scbus1 target 0 lun 0 (pass1,ada1) at scbus2 target 0 lun 0 (pass2,ada2) at scbus6 target 0 lun 0 (ses0,pass3) On Fri, Jan 29, 2021 at 1:34 PM Slawa Olhovchenkov wrote: > On Fri, Jan 29, 2021 at 10:12:03AM -0700, Alan Somers wrote: > > > What does "camcontrol devlist" show? > > Only 2 disk: usb-flash and da1 (isci connected) > (I am currently just boot from 12.2 install) > > > On Fri, Jan 29, 2021 at 10:06 AM Slawa Olhovchenkov > wrote: > > > > > On Fri, Jan 29, 2021 at 09:51:33AM -0700, Alan Somers wrote: > > > > > > > I've never used any tool with SGPIO. The hardware simply isn't > powerful > > > > enough to be useful. sesutil works, in theory, to control the > LEDs. But > > > > it's of limited usefulness since there's no way to tell which drives > are > > > > installed in which slots. > > > > > > For me sesutil failed w/ "No SES device found" > > > > > > > > > > > On Fri, Jan 29, 2021 at 9:44 AM Slawa Olhovchenkov > > > wrote: > > > > > > > > > On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > > > > > > > > > > > The short story is: SGPIO sucks. It doesn't detect drive > presence, > > > much > > > > > > less provide physical path information. The only thing you can > do > > > with > > > > > it > > > > > > is control the fault LEDs. But doing that usefully requires you > to > > > have > > > > > > some extra source of information about what drives are installed > in > > > what > > > > > > slots. Basically, you need to track that kind of information > > > offline. > > > > > > sesutil ought to be able to control the LEDs, at least, but I've > > > never > > > > > > personally used it with SGPIO. > > > > > > > > > > What tool you used with SGPIO? > > > > > What additional drivers need? > > > > > > > > > > > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov < > s...@zxy.spb.ru> > > > > > wrote: > > > > > > > > > > > > > I am have Supermicro MB X9DBU-iF connected to bcakplane > > > BPN-SAS-825TQ > > > > > > > by T-SGPIO cables. sesutil don't found any SES device. > > > > > > > > > > > > > > Is this posible to have control to this backplane? > > > > > > > ___ > > > > > > > freebsd-stable@freebsd.org mailing list > > > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > > > > To unsubscribe, send any mail to " > > > > > freebsd-stable-unsubscr...@freebsd.org" > > > > > > > > > > > > > ___ > > > > > > freebsd-stable@freebsd.org mailing list > > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > > > To unsubscribe, send any mail to " > > > freebsd-stable-unsubscr...@freebsd.org > > > > > " > > > > > > > > > ___ > > > > freebsd-stable@freebsd.org mailing list > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > To unsubscribe, send any mail to " > freebsd-stable-unsubscr...@freebsd.org > > > " > > > > > ___ > > freebsd-stable@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org > " > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
On Fri, Jan 29, 2021 at 10:12:03AM -0700, Alan Somers wrote: > What does "camcontrol devlist" show? Only 2 disk: usb-flash and da1 (isci connected) (I am currently just boot from 12.2 install) > On Fri, Jan 29, 2021 at 10:06 AM Slawa Olhovchenkov wrote: > > > On Fri, Jan 29, 2021 at 09:51:33AM -0700, Alan Somers wrote: > > > > > I've never used any tool with SGPIO. The hardware simply isn't powerful > > > enough to be useful. sesutil works, in theory, to control the LEDs. But > > > it's of limited usefulness since there's no way to tell which drives are > > > installed in which slots. > > > > For me sesutil failed w/ "No SES device found" > > > > > > > > On Fri, Jan 29, 2021 at 9:44 AM Slawa Olhovchenkov > > wrote: > > > > > > > On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > > > > > > > > > The short story is: SGPIO sucks. It doesn't detect drive presence, > > much > > > > > less provide physical path information. The only thing you can do > > with > > > > it > > > > > is control the fault LEDs. But doing that usefully requires you to > > have > > > > > some extra source of information about what drives are installed in > > what > > > > > slots. Basically, you need to track that kind of information > > offline. > > > > > sesutil ought to be able to control the LEDs, at least, but I've > > never > > > > > personally used it with SGPIO. > > > > > > > > What tool you used with SGPIO? > > > > What additional drivers need? > > > > > > > > > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov > > > > wrote: > > > > > > > > > > > I am have Supermicro MB X9DBU-iF connected to bcakplane > > BPN-SAS-825TQ > > > > > > by T-SGPIO cables. sesutil don't found any SES device. > > > > > > > > > > > > Is this posible to have control to this backplane? > > > > > > ___ > > > > > > freebsd-stable@freebsd.org mailing list > > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > > > To unsubscribe, send any mail to " > > > > freebsd-stable-unsubscr...@freebsd.org" > > > > > > > > > > > ___ > > > > > freebsd-stable@freebsd.org mailing list > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > > To unsubscribe, send any mail to " > > freebsd-stable-unsubscr...@freebsd.org > > > > " > > > > > > > ___ > > > freebsd-stable@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org > > " > > > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
What does "camcontrol devlist" show? On Fri, Jan 29, 2021 at 10:06 AM Slawa Olhovchenkov wrote: > On Fri, Jan 29, 2021 at 09:51:33AM -0700, Alan Somers wrote: > > > I've never used any tool with SGPIO. The hardware simply isn't powerful > > enough to be useful. sesutil works, in theory, to control the LEDs. But > > it's of limited usefulness since there's no way to tell which drives are > > installed in which slots. > > For me sesutil failed w/ "No SES device found" > > > > > On Fri, Jan 29, 2021 at 9:44 AM Slawa Olhovchenkov > wrote: > > > > > On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > > > > > > > The short story is: SGPIO sucks. It doesn't detect drive presence, > much > > > > less provide physical path information. The only thing you can do > with > > > it > > > > is control the fault LEDs. But doing that usefully requires you to > have > > > > some extra source of information about what drives are installed in > what > > > > slots. Basically, you need to track that kind of information > offline. > > > > sesutil ought to be able to control the LEDs, at least, but I've > never > > > > personally used it with SGPIO. > > > > > > What tool you used with SGPIO? > > > What additional drivers need? > > > > > > > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov > > > wrote: > > > > > > > > > I am have Supermicro MB X9DBU-iF connected to bcakplane > BPN-SAS-825TQ > > > > > by T-SGPIO cables. sesutil don't found any SES device. > > > > > > > > > > Is this posible to have control to this backplane? > > > > > ___ > > > > > freebsd-stable@freebsd.org mailing list > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > > To unsubscribe, send any mail to " > > > freebsd-stable-unsubscr...@freebsd.org" > > > > > > > > > ___ > > > > freebsd-stable@freebsd.org mailing list > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > To unsubscribe, send any mail to " > freebsd-stable-unsubscr...@freebsd.org > > > " > > > > > ___ > > freebsd-stable@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org > " > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
On Fri, Jan 29, 2021 at 09:51:33AM -0700, Alan Somers wrote: > I've never used any tool with SGPIO. The hardware simply isn't powerful > enough to be useful. sesutil works, in theory, to control the LEDs. But > it's of limited usefulness since there's no way to tell which drives are > installed in which slots. For me sesutil failed w/ "No SES device found" > > On Fri, Jan 29, 2021 at 9:44 AM Slawa Olhovchenkov wrote: > > > On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > > > > > The short story is: SGPIO sucks. It doesn't detect drive presence, much > > > less provide physical path information. The only thing you can do with > > it > > > is control the fault LEDs. But doing that usefully requires you to have > > > some extra source of information about what drives are installed in what > > > slots. Basically, you need to track that kind of information offline. > > > sesutil ought to be able to control the LEDs, at least, but I've never > > > personally used it with SGPIO. > > > > What tool you used with SGPIO? > > What additional drivers need? > > > > > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov > > wrote: > > > > > > > I am have Supermicro MB X9DBU-iF connected to bcakplane BPN-SAS-825TQ > > > > by T-SGPIO cables. sesutil don't found any SES device. > > > > > > > > Is this posible to have control to this backplane? > > > > ___ > > > > freebsd-stable@freebsd.org mailing list > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > > To unsubscribe, send any mail to " > > freebsd-stable-unsubscr...@freebsd.org" > > > > > > > ___ > > > freebsd-stable@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org > > " > > > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
I've never used any tool with SGPIO. The hardware simply isn't powerful enough to be useful. sesutil works, in theory, to control the LEDs. But it's of limited usefulness since there's no way to tell which drives are installed in which slots. -Alan On Fri, Jan 29, 2021 at 9:44 AM Slawa Olhovchenkov wrote: > On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > > > The short story is: SGPIO sucks. It doesn't detect drive presence, much > > less provide physical path information. The only thing you can do with > it > > is control the fault LEDs. But doing that usefully requires you to have > > some extra source of information about what drives are installed in what > > slots. Basically, you need to track that kind of information offline. > > sesutil ought to be able to control the LEDs, at least, but I've never > > personally used it with SGPIO. > > What tool you used with SGPIO? > What additional drivers need? > > > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov > wrote: > > > > > I am have Supermicro MB X9DBU-iF connected to bcakplane BPN-SAS-825TQ > > > by T-SGPIO cables. sesutil don't found any SES device. > > > > > > Is this posible to have control to this backplane? > > > ___ > > > freebsd-stable@freebsd.org mailing list > > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > > To unsubscribe, send any mail to " > freebsd-stable-unsubscr...@freebsd.org" > > > > > ___ > > freebsd-stable@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org > " > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
On Fri, Jan 29, 2021 at 09:22:47AM -0700, Alan Somers wrote: > The short story is: SGPIO sucks. It doesn't detect drive presence, much > less provide physical path information. The only thing you can do with it > is control the fault LEDs. But doing that usefully requires you to have > some extra source of information about what drives are installed in what > slots. Basically, you need to track that kind of information offline. > sesutil ought to be able to control the LEDs, at least, but I've never > personally used it with SGPIO. What tool you used with SGPIO? What additional drivers need? > On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov wrote: > > > I am have Supermicro MB X9DBU-iF connected to bcakplane BPN-SAS-825TQ > > by T-SGPIO cables. sesutil don't found any SES device. > > > > Is this posible to have control to this backplane? > > ___ > > freebsd-stable@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > > > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: ses device over T-SGPIO
The short story is: SGPIO sucks. It doesn't detect drive presence, much less provide physical path information. The only thing you can do with it is control the fault LEDs. But doing that usefully requires you to have some extra source of information about what drives are installed in what slots. Basically, you need to track that kind of information offline. sesutil ought to be able to control the LEDs, at least, but I've never personally used it with SGPIO. -Alan On Fri, Jan 29, 2021 at 9:02 AM Slawa Olhovchenkov wrote: > I am have Supermicro MB X9DBU-iF connected to bcakplane BPN-SAS-825TQ > by T-SGPIO cables. sesutil don't found any SES device. > > Is this posible to have control to this backplane? > ___ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
ses device over T-SGPIO
I am have Supermicro MB X9DBU-iF connected to bcakplane BPN-SAS-825TQ by T-SGPIO cables. sesutil don't found any SES device. Is this posible to have control to this backplane? ___ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"